The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

We where asked to write a webapplication, with similar functionalityas an existing desktop application. The application can todayrecord sounds from a person, mix it together at the optimal place withanother, similar sound and play back the result.The application used mathematical calculation that the developerswhere not familiar with, therefore it was decided to focus on the partsthat involved recording and playing sound, to pave the way for anyfuture implementation.The follwing prototypes where implemneted:1. Read a sound clip from a file.2. Splicing of two sound clips at different points in the clips.3. Generate the sound of a guitar.The result of this evaluation is that web browsers today are notready for this type of application, but that there is potetial as soonas W3C have standardised the use of a microphone as a source to theexisting DSP functions..

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Nowadays, cooperation is necessary and this study tries to illuminate the possibilities and problems about cooperation in fiction between 7 small/midsize farms in Skåne. Conventional Farming is done with grain and sugarbeets as specialization. Calculation of machine costs have been done and compared in the study, both for the farms in thorough and the fictitious operation companies. Business ratios as depreciation/ha, interest/ha and maintenance/ha have been calculated. In this essay we present a proposal about how a practical implementation can be done. In the proposal there is an example how the distribution of work can be done.

Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

This paper studies the research foundations created in 1994 from the former wage earners? funds out of a portfolio management point of view. Firstly it describes the seven largest foundations and their different portfolio management structures. Secondly it analyses the performance of these foundations measured as the intercept, Jensen?s a, in a linear regression of the excess returns of a portfolio versus a proxy for the market, as well as the Sharpe-ratio.

Servera R&S AB is Sweden?s largest wholesale company within the restaurant and food service industry. Servera R&S AB is the daughter company to Axel Johnson AB, which in turn is a part of the Axel Johnson Group with Antonia Ax:son Johnson as the owner. Servera is a nation wide company with a business concept of offering a complete selection of merchandise and services to the professional food service market. The company is split into for different regions: the north region, the middle region, the southwest region, and the southeast region and has its headquarter in Stockholm.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This thesis approaches the problem of estimating the arm angles of an industrial robot with flexibilities in joints and links. Due to cost-cutting efforts in the industrial robots industry, weaker components and more cost-effective structures have been introduced which in turn has led to problems with flexibilities, nonlinearities and friction. In order to handle these challenging dynamic problems and achieve high accuracy this study introduces state observers to estimate the tool position.The observers use measurements of the motor angles and an accelerometer and the different evaluated observers are based on an Extended Kalman Filter and a deterministic variant. They have been evaluated in experiments on an industrial robot with two degrees of freedom. The experimental verification shows that the state estimates can be highly accurate for medium frequency motions, ranging from 3-30Hz.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.