Due to the well-developed rhetoric and the relative easiness to estimate costs, cost considerations are usually more in-depth than revenue considerations when discussing strategies impact on profitability. To avoid dysfunctional companies and poorly judged strategy decisions it is necessary to develop the rhetoric of revenue considerations.By collecting data from 230 respondents in a quantitative study of two grocery stores in Mora, the study aimed to assess the relationship between choice of generic strategy and self-reported buying behavior, considering differing decision-making processes of customers.The results of the study indicate that a differentiation strategy performs better than a low-cost strategy in terms of buyer frequency, number of goods and cost of purchase. However, due to a poor data collection method, the results are weak, and should therefore be questioned. The study indicates that reliability considerations for behavioral measures should be treated in the same respect as psychological measures, and therefore illuminates the need for new methods and measures to be developed..

With today´s power uprates in BWR reactors the bundle lift force has become aproblem. The lift force is calculated using a best estimate approach and the resultfrom the calculation should pass the existing lift force margin. Lift force margin isdefined so that the lift force may not exceed 80 % of the fuel weight. The margin issupposed to cover all the uncertainties that exist in the lift force calculations.However, no uncertainty analysis has been conducted to quantify the uncertainties.In this report the uncertainties in the lift force model have been quantified. Each inputparameter to the lift force model which has been assumed to have an uncertainty isassigned a probability distribution.

At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

Scania?s discount rate - the return requirement of investments - refers to Scania?s WACC or weighted average cost of capital. The capital markets return requirement on equity and the credit market interest cost of borrowing is weighted to become the single discount rate, the WACC. The purpose of this study is to investigate which asset pricing model of APT and CAPM Scania should use in their WACC calculations. The company now uses a group WACC of 11 percent which is used in all company levels.

Previous research has, by studying large listed firms, identified cost reductions and knowledge transference as the primary reasons for outsourcing.  Previous research has also indicated that Business Process Outsourcing is likely to increase in popularity and experience high annual growth going forward. This study aims to explore why mid-sized and large firms decide to in Jämtlands län, fully or partly, outsource their finance/accounting activities. Theories regarding transaction cost economics and resource based view composes the foundation of this study and the information used has been gathered through the use of semi-structured interviews.  The results shows, like the chosen theories and previous research indicates, that the outsourcing decision is primary based on expected cost reductions.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

The project has been implemented in collaboration with Carl-Johan Lundberg on Deltagruppen Ltd in Jönköping. Problem introduction comes from Carl-Johan's own experience from the hotel sector. The problem that all hotels has is that they sell two products, i e. simple - and double rooms. Persons that travel in companies do not desire always to share bed.Focus in the work is to develop a product that holds together two simple beds and forms double bed, concurrent that it goes that converters to two simple bed without needing to disassemble the product and be done invisible.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

This thesis is based on an assignment from a unit within an international group manufacturing industrial products. The purpose of the thesis is to analyze and suggest ways to improve the cost accounting system in use at the unit. The main source of empirical data has been interviews with employees. The theoretical framework is based on a comparison between traditional/standard costing and activity-based costing (ABC). The cost accounting system in use is described in detail and classified as a traditional/standard cost accounting system.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

ABSTRACTToday's modern technological society is constantly evolving and house planning is one area that is constantly creating new technical solutions. By looking back at selected architectural eras during the 1900?s, the idea is to study and analyse three building structures in Gothenburg with a focus on quality and content in the urban space.In order to provide a background for the three selected areas, their history has been studied. The main question for the research is: how do different building structures affect the content and qualities in the urban space?The areas have been selected to represent three typical epochs in Swedish building history.