Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

In order to reach the environmental targets, set up by the EU, there are many measures taken to make Sweden more energy efficient. In the housing and real estate sector, an installation of an exhaust air heat pump that reuses the heat in the exhaust air in order to lower the amount of acquired energy, is an example of such an action. The recovered energy can then be used for heating of radiators and tap water. This report aims to evaluate and compare three different systems using exhaust air heat pumps regarding COP, degree of coverage and cost savings. This study was delimited to only account for apartment buildings.The theory chapter describes the different conditions and factors that affect a building?s energy balance.

Bakgrund: Dagens industriföretag har ägnat mycket tid och tankeverksamhet åt att förbättra produktiviteten men i regel betydligt mindre till att beräkna enskilda produkters kostnader. Allt högre krav ställs på en kundanpassad produktion med differentierade produkter. Produkternas heterogenitet innebär även heterogen resursförbrukning och det gör det svårt att veta vilka kostnader en produkt verkligen orsakar. Inom ABC är det kostnadsdrivarens uppgift att koppla samman resursförbrukningen med produkterna. Valet av kostnadsdrivare kan ge stora effekter på produktens kostnad och visa att produkter som tidigare betraktas som lönsamma säljs med förlust.Syfte: Syftet är att beskriva och analysera problematiken kring val av kostnadsdrivare.Genomförande: En fallstudie har genomförts kring val av kostnadsdrivare vid Swedish Tissue.Resultat: Det finns inga optimala kostnadsdrivare utan en komplex avvägning med kalkylens syfte i bakhuvudet krävs.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

En studie av hur revisorerna granska den miljöinformation som företag med tillstands- och/eller anmälningspliktiga verksamheter, enligt lag är förordnade att redovisa i förvaltningsberättelsen samt om man utifran denna granskningen kan säga nagot om hur informationens tillförlitlighet berörs..

Bakgrund: Rottne industri a?r ett fo?retag som tillverkar skogsmaskiner, na?rmare besta?mt sko?rdare och skotare. En viktig del av fo?retagets strategi i dagsla?get grundar pa? att bedriva en genero?s reservdelsverksamhet ut mot kunder. Reservdelsverksamheten har vuxit och blivit en konkurrensfo?rdel fo?r Rottne industri.

Denna uppsats undersöker om och i så fall hur affärsrisken påverkar företagens kapitalstruktur. Vi har använt oss av två årtal med olika räntenivåer, 1995 och 2005. Vi kunde genom en multipel regressionsanlalys säkerställa att det existerar ett samband, och även att det finns skillnad mellan åren vad gäller korrelationen i sambandet..

Companies financed through borrowed capital are allowed a tax deduction for the costs re-lated to their borrowed capital. A similar tax relief for companies financed through share-holder?s equity does not exist, why these companies are taxed higher than companies fi-nanced by borrowed capital. The result is that there is an asymmetric tax treatment of companies depending on how they are financed.The autumn of 2012, the Swedish government presents a proposal for an investor deduc-tion which seeks to equalize the above mentioned asymmetry. The proposed investor de-duction is a tax relief for investments in shares in a startup- or small company equal to 50 percent of the acquisition cost of that investment.The venture capital deduction, which in this thesis is treated as an alternative to the inves-tor deduction, is an interest-free tax credit which significate that two-thirds of the acquisi-tion cost is deductible from taxation at the time of the acquisition.

Detta examensarbete har syftat till att utveckla ett verktyg för att utvärdera en IT-avdelnings möjligheter till effektivisering genom att implementera Lean på IT Service Management. Verktyget har utvecklats i samarbete med Tina Eriksson på uppdrag av management och IT-management konsultbolaget Connecta AB. Connecta AB har som syfte att använda verktyget för framtida affärer. För att verktyget ska vara användbart och uppfylla Connectas krav så har fyra mål satts upp. Verktyget ska vara trovärdigt, resurseffektivt, användarvänligt samt underlätta för fortsatt arbete och implementering av Lean på IT Service Management.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

Teorigenomgång som mynnar ut i tolv parametrar som karaktäriserar en innovativ organisation, samt en teoretisk modell, Innovation Value Chain (IVC) som beskriver den innovativa processen. Åtta fallstudier utav tillverkande svenska företag analyseras med hjälp av IVC modellen..

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

En karltäggning över orsaker till aversion mot förvärv, målföretagens utseende samt dess möjligheter till försvar mot fientliga förvärvare..

This security study attempts to explain the dynamics of international conflict management of an intrastate conflict, through a combination of three theoretical frameworks. The conflict in Syria is shown to be managed mainly through strategies using coercive diplomacy, and some main contributions within the research field relating to strategies of coercion are used for guidance, to important factors which could affect coercive international conflict management, as well as to additional theories which could enhance the study?s explanatory power through a combined theoretical framework. The two added theoretical frameworks are Power Balancing and a Multidimensional concept of Power. With the aid of analytical tools derived from this combined framework the conflict management is analysed within both a multilateral and unilateral setting, offering some explanation as to why international conflict management (practiced by UNSC multilaterally and USA unilaterally) has shown so little progress in regard to the conflict, as well as why one significant, though limited, result could be achieved regarding the destruction of the Syrian regime?s chemical weapons arsenal..

The arm?s length principle has existed in Swedish law since 1928 but has previously been given little attention. In 2007, documentation requirements were introduced, and the government began to do tax audits regarding transfer pricing. This thesis examines how the documentation requirements and tax audits affect the application of the arm's length principle. The research consists of nine interviews with a total of ten people at the tax authority (Skatteverket) and audit- and consulting agencies. The results of the interviews are analyzed using the agency theory. Many companies are risk averse and prefer having correct transfer pricing instead of taking on challenging strategies that can be risky in case of an investigation by Skatteverket.