This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

This paper analyses education regarding its profitability from an individual?s perspective. The method for conducting the analysis is an ex ante cost-benefit analysis and the time period examined is between the days the education begins until retirement age. The conclusions of this paper are that tertiary education is not profitable for an individual given the conditions stated in this examination. Furthermore the longer the education lasts, the more unprofitable it is.

This report concerns the for Sweden foreign tree species hybrid larch, hybrid aspen and poplar, and focuses on the area Kalmar and Mönsterås municipalities. The report shows that there are not only advantages with these species. The larch, the most common of the alien tree species has the greatest problems due to that its timber is difficult to sell in the area but also the Larch´s poor pulp quality and is more likely to be damaged by wildlife than the spruce is. Hybrid Aspen is much easier to sell and is used like regular aspen for match wood and textile pulp. Its disadvantage is the high cost for plants and to prevent damage from wildlife.

In modern society globalisation is a fact within all industries, the textile industry included. Due to improvement in areas such as logistics and communication international trade have developed fast. As changes occur rapidly on the global market and companies must adjust and revise their processes in order to stay competitive.Because of the global price reduction consumers around the world expect low-price products, which mean that the companies have to find new ways to produce in a cost-efficient way. To maximize profit most of the textile production is situated in low-cost countries due to its labour-intensive character. It is crucial for fashion companies to allocate their activities in their value-chain effectively in order to reduce lead-times.

The purpose of this study was to gain a better understanding of how medium-sized construction companies adapt and how they choose to reorganize their operations in relation to the recession. The study has as its theoretical starting point theories about organizational learning, the impact of the economy on construction companies and strategies for dealing with recessions. The method used to conduct the study was semi-structured interviews with representatives from 15 different construction companies. The results of the study show that they used several strategies to adapt and reorganize the business in accordance with the recession. Some construction companies had to make cost savings as a result of the recession.

Compared with a few years ago, the cost of concentrates has increased substantially and because of that an increased proportion of pasture is of interest. Pasture is cheap and the farmer does not have to harvest when the cows do it themselves by grazing. This saves both money and time. According to research milk yield decrease with an increasing proportion of pasture in the diet. This is because cows on pasture will have lower dry matter intake than cows with supplements.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

Examensarbete i Ekonomistyrning, 30hp, Ekonomihögskolan vid LinnéuniversitetetTitel: Kalkylutveckling i tillverkningsindustrin ? en fallstudie hos HordaGruppen ABUnder 1980-talet uppmärksammades kalkylmodellens roll som ekonomiskt styrverktyg. Denna uppmärksamhet ledde till omfattande studier av hur kalkylmodeller kunde utvecklas för att lättare klara av förändringar i företags inre och yttre förutsättningar. Kalkylmodellers utformning påverkas av ett stort antal faktorer som t.ex. strategi, kontext och användning.

During the last decennium climate issues have become more and more important. Many steps towards an adaption of efficient energy supply systems have been taken all around the world. These steps have been created to ensure the next generation?s energy demand. In EU and Sweden objectives have been set to ensure that the energy consumption decreases by 20% year 2020 and by 50% year 2050 compared with the energy consumption levels of year 1995.

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.

The aim of this study is two folded. We wish to investigate if there is a value premium from hedging jet fuel exposure for American and European airlines. We also seek to answer if airlines can affect their probability to default by using Risk Management. During the period 2003 ? 2006 there existed a value premium for airlines that hedged their expected future consumption of jet fuel.

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

In this master thesis, the possibilities of customizing a low-cost microprocessor with the purpose of replacing an existing microprocessor solution are investigated. A brief survey of suitable processors is carried out wherein a replacement is chosen. The replacement processor is then analyzed and extended with accelerators in order to match set requirements.The result is a port of the processor Lattice Mico32 for the FPGA curcuit Xilinx Virtex-5 which replaces an earlier solution using Xilinx MicroBlaze. To reach the set requirements, accelerators for floating point arithmetics and FIR filtering have been developed. The toolchain for the processor has been modified to support the addition of accelerated floating point arithmetics.A final evaluation of the presented solution shows that it fulfills the set requirements and constitutes a functional replacement for the previous solution..