This master thesis has been a product realization process. Having BRIO:s walking cart as thestaring point the purpose was to further develop the principle of such products and at the sametime broaden their sector of use. The final result is to be regarded as a complete solutionmeant as a foundation for further development at the BRIO Company. The product aims tosatisfy the demands and needs of the target group called theon the go parent. Trends, qualityand purchase power are features that characterize this particular target group.The project resulted in a walking stool namedBRIO Circus after its source of inspiration.

In which ways have composing processes in music appeared over the past 300 years? How may composing processes work today? What does new technology do to this processes?The key purpose of this study is to investigate various composing processes. A further purpose is also to gain an awareness of how we use modern technology by computers and their notation programmes.The research design of this thesis includes a display of literature related to composing processes. along with an analysis of the writer?s own experiences in the area.

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.

We have produced a process mapping and from there developed a document management plan for the research service at the Labour Movement Archives and Library (ARAB) in Stockholm, Sweden. The project was conducted during five weeks in the spring of 2011 at ARAB and the resulting classification structure and document plan has been formulated and presented to the staff at a seminar. We found that the institution in some cases were suffering from an inadequate documentation in a number of the identified processes, and also in their records management and archiving. In this additional memorandum follows an analyzing discussion of activity-based document- and archive management, e-archives and process mapping. We have accordingly tried to standardize the process of research services and contribute to a more adequate document management within the institution.

In Sweden there is scepticism if there really is a difference between the two biggest political parties, the Moderate/Conservative party and the Swedish Social Democrats. The voters feels that the arguments used by both parties are more or less the same and that it does not matter on whom you vote. Hence I am going to compare the parties? policy programs, developed by the members in each party, by an analysis of ideas to see if the two parties are so similar that they hardly are two different options, or if there is a divergence between the two. My choosing of the parties? policy programs comes from a decision to look at the members? party, they are the authors of the programs, the core. I have to admit I am not unbiased in this work.

In  the  constantly  changing working  life  of  today, where  emphasis  on  human  capital  grows stronger,  the  importance  of  recruiting  and  retaining  good  staff  increases.  Successful recruitment  requires  a  first-rate  recruitment  process.  In  literature  on  recruitment recommendations for successful recruitment are presented.   The  aim  of  this  study  is  to  describe  similarities  and  differences  between  these recommendations and Svenska Spel?s recruitment practice on the basis of a description of the recruitment process at AB Svenska Spel, and also to identify possible reasons for differences between theory and practice.  To  meet  the  purpose  of  this  study  literature  and  scientific  reports  have  been  studied. Interviews  with  five  HR-specialists  and  four  managers  have  also  been  conducted.  The recruitment process is therefore described out of the employer?s point of view.

Due Diligence is today an important part of the transaction process through sales of properties and isan important process for both sellers and buyers. The process intends to review an asset before atransaction to minimize the risks associated with the acquisition by detecting weaknesses and verifythe asset's characteristics. The use of Due Diligence has become increasingly common over the pasttwenty years in the Swedish real estate market and there is no indication that this trend will decreasebut rather increase. Although there is widespread use of the process both in acquisitions ofcorporations and properties, both in Sweden and in the rest of the world, it is costly for thepurchasers and the concept is far from fully developed.This thesis aims to clarify what the real estate market thinks about the potential development of theprocess itself and the role of the actors. The main question is what opportunities exist to develop theconcept of Due Diligence in real estate transactions.

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

Ett utforskande av interpretation utfört i musik, akvarell och ord. En närgången bild av en levande musikalisk process studerad från en inre kärna. Arbetet består utav denna text, tre konserter från våren och sommaren 2013 som dokumenterades i DVD-format, ljudupptagningar av improvisationer och akvareller skapade i tiden för arbetet. Arbetets kärna, ögonblicksbilder från insidan av själva processen, presenteras i en egen del av arbetet och omsluts av förklarande, reflektioner och tankar. Författaren spelar viola och upplever synestesi..

This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

Each student in elementary school will under current policy documents have an individual development plan (IEP) from 1 January 2006. The plan should primarily aim for a higher goal achievement, but also to the student to gain a greater understanding of their own learning process and knowledge. My experience is that some students, despite efforts IUP have difficulty seeing their own learning process and it has been the starting point of my study. The aim of the study has been to investigate and analyze teachers work with individual development plans from the first grade to the sixth grade from a teacher's perspective. The goal was to identify strategies and techniques that could help develop IUP as a tool for the student's learning and understanding of their own learning process.