The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

Purpose: The purpose of this study is to investigate the innovation process of companies, and to analyse how important success factors and obstacles are in their innovation process.Method: The investigation strategy used for this essay was to interview companies that work with innovations. The essay has a qualitative approach. Both primary ? in the form of interviews - and secondary data ? literature found in books, scientific articles and internet - have been used to achieve our results.Results: The result of this essay is: there is not just one inovation process that is applicable to all companies. On the other hand, there are some guidelines that could be followed in the process.

People are given better opportunities to participate in polity today. Democratic equality entails that all individuals are equal and therefore they should be included in the process of making the decisions. How can participation be defined and does it mean that having the possibility to participate means that people can influence the process of making the decisions in polity process?This paper focuses on participation and influence in polity and examine the relationship between having the possibility to participate and having the possibility to actually influence polity process on more local level. Therefore I have been examining the citizens? participation and influence in Helsingborg which is my case study.

Background: outsourcing is one of the most obvious and continuous trends that has been able to study during the past ten years and also has had a strong development in the industry. What consequences will follow from an extended outsourcing? Purpose: the study?s overall purpose is to investigate what possibilities and risks that can be connected to an outsourcing decision and how the order of the service will handle the risks. The study will also investigate what management philosophy that will be used and regulate the outsourcing relation and how the company?s strategy will affect the decision and how the process of outsourcing will look like.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

This study investigates the corporate sustainability activity, linked to the company's core business, which is a relatively unexplored field in a Swedish context. The study examines how the organization has used management control for its sustainability activity within two social initiatives; and whether these initiatives have generated value for the organization and involved stakeholders. Management control of social initiatives are examined within the theoretical framework of The Sustainable Balanced Scorecard and the organization's value creation contributions are outlined in accordance with a definition of the concept of Creating Shared Value. The method used for the implementation of the study is a qualitative study, embodied in an illustrative case study of a large Swedish company operating within financial sector. The empirical data was collected through 12 in-depth interviews with representative interviewees within the organization and with other stakeholders involved in the company's social initiatives.

A query using telephone interviews of technology teachers teaching the course "Teknik, Människa, Samhälle", a core course of the technique programme at the swedish gymnasium..

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

The current thesis is on the rule of law and how the principles of the rule of law are met in thenew Swedish migration process. The migration process has been subjected to criticism duringseveral years and on different occasions. The migrations process is viewed through a ?rightsof the child? perspective, foremost to seek if the rights of the child are met. The children are avulnerable group, not the least in the process of migration.

?A designer rarely works alone?. The first sentence of Jonas Löwgren and Erik Stolterman's chapter on design as a social process made me curious. What if a designer worked alone? What are the actual differences between working on a project alone and as part of a group? How would it influence the creative process? What would be different when coming up with ideas, meeting with clients and setting deadlines? Does the influence of another designer stifle the individual creativity or does it actually nurish it? This paper is written to answer these and other questions as well as take you through the creative process of the production of ?Daddy? - the music video..

This thesis provides a good introduction to the American environmental certification system LEED, Leadership in Energy and Environmental Design, and trough compar-isons between Sweden and the United States an explanation to the systems design is given. The work is closely linked to a LEED Core & Shell project in Stockholm, Swe-den, where the goal is to reach the second highest rating in LEED - Gold.This thesis gives a broad description of the LEED system and a more profound study of the energy sector, Energy and Atmosphere. Here, for example, an analysis has been made of how the energy consumption of an imaginary building designed according to the requirements of the BBR (Swedish building code) performs in comparison to the Baseline building in LEED.The existing model of Borgarfjord 3, which served as a case study in this work, has al-so been modified to investigate the energy savings that could have been achieved by adding extra insulation to the building. A description of the problems, regarding how the Swedish district heating system (DES) is treated in LEED, is given as well as the suggested modifications. This is an issue that will be pursued during the process of shaping a new, international, version of LEED due to be launched 2012..

Title: The process of gentrification ?the transformation of declined neighbourhoods into attractive ones Gentrification = ?A social process of change where people with high socioeconomic status move into neighbourhoods which traditionally has been dominated by people from the lower classes or from ethnical minorities.? (Nationalencyklopedin 2010).In many cities around the world, disinvested neighbourhoods become the place to be, where everything happens. This usually occurs when different social groups, such as bohemians, homosexuals and artists, move into a declined and disinvested neighbourhood. After a while, people from the middleclass move in to the area due to its increased attractiveness, and start to renovate their properties. This usually leads to higher rents, which force some of the original inhabitants to leave the neighbourhood.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

Application Lifecycle Management (ALM) is a genre of computerized systems which allows system development corporations to efficiently and more easily manage, maintain and handle the applications lifecycle. These ALM systems have a wide variety of tools which can be integrated to enable and support collaborative work, while they act at the core of the organisation. Todays ALM systems support flexible system development methods throughout the entire development process. This paper focuses on a case-study of a Swedish business- and technology corporation and their use of two ALM systems with an aim to unravel the differences between these systems and their functionality to serve as a basis for decision making regarding their utilization of best practice with their ALM-Systems. Meanwhile we studied their approach to ALM systems to see if they were using them according to the initial idea of ALM systems.

Background and aim: Organizations must be able to manage change in order to survive in today?s competitive society. To continue to develop and reach better results is fundamental. Case Company Parker Hannifin Corporation, Quick Coupling Division Europe, Tema Ingenjörsfirman AB, Skövde has an ambition to have an organization that manage changes and continuously improve its performance. That is the reason why this examination work arises.