This thesis describes how the chip space and coolant channels are designed in today?s mills, the ideas behind the design and what is considered to be the best method of cooling. It contains ideas on how the chip space can be simplified. It contains several concepts on how the cooling could be designed for better efficiency and manufacturability. There are also suggestions on how the cooling could be stopped when the cutter isn?t cutting.

Beans are a global source of plant-based protein, and in some countries, they constitute a primary source of protein intake. With ongoing climate change, including rising temperatures, it is necessary to adapt beans to ensure a reliable food supply. An important mechanism that many plants have, to cope with high temperatures, is cooling through transpiration. During transpiration, stomata open and release water vapor. Water molecules use heat energy from the leaf to convert into gas, thereby cooling the leaf.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

This thesis consider alternatives for heating and cooling planned office buildings at Arlanda airport. The thesis is divided into three parts where the third part is a shorter synthesis of the two first. In the first part the energy demands of the buildings are modelled in a computer program. Two different building models are created, one more conventional and one with good energy properties. The results shows that with proper construction and ventilation systems etc.

The automotive market is currently undergoing a historical change where stricter emission legislations and ever increasing fuel costs have intensified the search for effective alternatives to the conventional internal combustion engine, which has resulted in a substantial trend towards electrification of powertrains. Storage of electrical energy is the fundamental component in this technology where the lithium-ion batteries are currently considered as the most appropriate solution. Lithium-ion batteries, however, as other types of batteries, can only be used efficiently and durably within a specific temperature range.This Master thesis has been carried out in collaboration with Electroengine in Sweden AB, situated in Uppsala, which has an ongoing project regarding development of a modular battery system for electric powertrains. The project is at a stage where an initial prototype has been developed which provides the foundation for this thesis. The study has addressed the battery system performance from a thermal perspective, in order to validate the ability of the system to create a thermally serviceable environment for the lithium-ion battery cells.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

Energy consumption is at present a major political issue, and numerous projects that comprise many nations are currently in process to increase energy efficiency and bring down energy dependency. As a member state of the EU, Sweden now faces the challenge of implementing substantial energy-saving measures until the year 2016. One of these measures is the project ?Green Islands? financed by the EU that intend on creating sustainable islands in areas around the Baltic Sea. The Archipelago Foundation leads the project that concerns the Stockholm archipelago, where focus has been placed upon decreasing energy usage in businesses and services on Utö among other islands.

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the Cooling system.

AbstractClimate and environmental issues are of paramount importance. Researchers agreethat we must all contribute to a reduction of gases that contribute to climatechange. Energy consumption must decrease within all sectors and the promotionof renewable sources of energy must be introduced.Each sector should aspire to decrease its energy consumption. Energyconsumption is strongly linked to waste gases that contribute to climate change.Passive houses are a part of the construction industry's methods to attain energyconservation.Passive houses are derived from low energy houses and super insulated houses. Apassive house is intended to obtain heat from the inhabitants and through theiractivities.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/Cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

Uppsatsens syfte var att undersöka vilken betydelse yttre påverkan och inre drivkrafter har haft i fyra individers karriärutvecklingsprocess inom en hårt konkurrensutsatt bransch, samt hur dessa har hanterat denna. Datainsamlingen genomfördes med hjälp av semistrukturerade mailenkäter, och det insamlade materialet bearbetades med hjälp av deduktiv tematisk analys. De teman som ligger till grund för analysen är: studie- och yrkesvägledning, cooling down, empowerment, informationsteorier, forskningslitteratur samt karriärvalsteorin SCCT. Studien visar att samtliga respondenter har utsatts för dämpande påverkan, cooling down, under sin uppväxt, både från skolpersonal, och den egna familjen, men också att de erhållit empowerment från andra håll. Respondenterna har hanterat denna yttre negativa påverkan på olika sätt, men gemensamt för dem alla är att de visat på en inre drivkraft, som trots den nämnda negativa påverkan gjort att de nått framgång inom sitt gebit.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

The aim of this thesis is to develop a new business model for district heating and cooling firms which can contribute to a stabilization of the Swedish national energy system. The business model is developed for a district heating and cooling firm and is exemplified with Fortum Heat. The theoretical investigation around the topic creates a rigid base for following qualitative empirical studies. Osterwalder?s canvas for business model generation is used together with a Casual Loop Diagram to identify a number of business opportunities which stabilizes the national energy system.