Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

Utvecklingen inom IT-området har under de senaste åren varit explosionsartad. Allt fler branscher har börjat att leta efter nya sätt att tillämpa de olika framsteg som skett inom områdetDetta arbete behandlar en kombinerad litteraturstudie och intervjuundersökning kring objektorientering och Business Process Reengineering. Problemställningen för detta arbete har varit:- På vilka sätt kan objektorientering tillämpas för att utveckla de synsätt och de metoder som används inom Business Process ReengineeringSyftet med arbetet var att hitta ett antal generella tillämpningsområden utifrån problemställningen, samt att hitta ett antal fördelar, som dessa generella tillämpningar skulle kunna medföra.Resultatet av detta arbete visar att det finns områden inom Business Process Reengineering, där en objektorienterad tillämpning skulle kunna medför stora fördelar. Som exempel på detta kan nämnas förbättrade möjligheter att skapa och anpassa de informationssystem som skall stötta verksamhetsprocesserna. Även möjligheterna att skapa dynamiska metoder, där varje metodsteg utgörs av färdiga moduler som sedan kombineras, bör nämnas som en fördel..

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

Purpose: To investigate whether or not the credit granters believe the quality in audits will deteriorate after the abolishment of statutory audit and, if that is the case, how the abolishment will strike the purpose and goal of accounting.Approach: To answer our purpose we carried out a literature study to later implement interviews with four granters of credits specialised in business accounts.Findings: The process of credit granting will not change after the abolishment of statutory audit for companies still using audit reports. Though, for other companies the process will change dramatically since the lean time of the process will increase. Higher demands will be put on these companies since the reliability in the economic information will decrease when it is no longer being reviewed in the same sense. Though, the credit granters believe that some form of substitute for audit will be demanded in order for the companies to be granted credits from the bank..

The subject of this bachelor thesis is discrimination and unfair treatment in the employment process where employers discriminate against job applicants. The purpose of this study and research questions is to investigate and clarify the legal protection available against discrimination and unfair treatment of pregnant women and persons on parental leave during the employment process and how this protection differs between men and women. This thesis highlights the Swedish law and EU law regarding discrimination and unfair treatment of individuals. The concept of discrimination and its requisites will be accounted for and exemplified by case law. This statement will be analyzed along with the relevant case law of the EU-court and the Labor-court.

Background: Many different parties in the society are affected by the financial information delivered by the companies. Therefore, different interests want their ideas to have an impact on the accountning standards. The construction of the accounting standards are illustrated as a pure political process, where lobbying and conflicts of interest are determining factors. Purpose: The purpose is to understand the underlying interests behind regulation of financial accounting in Sweden and how these interests are manifestated in the establishment of accounting standards. Method: The thesis is designed as a casestudy of the regulation process which induced the legislation of the Årsredovisningslagen 6 kap 1 § 3st.

The Intellectual Capital Statement facilitates the mapping of interdependent and simultaneously impacting intellectual capital factors in a unique way. The process-orientation of the German approach differentiates it from its predecessors and gives an advantage over alternative procedures. By combining these aspects with the possibility to communicate the company?s efforts and progress in the field of intellectual capital, the German Intellectual Capital Statement (Wissensbilanz) provides an effective management tool..

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

It seems like Swedish municipalities are dominated by beliefs that all citizen participation is good for the development of local democracy. A critic of this certainty is rising among Swedish scholars of political science. However, a critic with an ambition of such generalization is harsh. Different democratic projects contents different qualities and thereby diverse problems in the democratic process. If these democratic problems within the process can be recognized, a deeper understanding can be found and in the prolongation a strengthening of the democracy.This essay examines the democratic process of Lomma municipality's democratic project of citizen participation.