This thesis tries to clarify why more houses such as passive houses is not built and at the same time the differences is described with the conventional construction as a starting point. Sweden has set environmental objectives to reduce energy consumption in buildings by 50 percent by the year 2050 compared to 1995. The passivehouse concept could have a significant role, particularly in the reconstruction of buildings with high energy consumption. For sustainable building the passivehouse technology is an economically viable concept while benefiting the environment. Initially an introduction is given of the background to the problem, purpose and objective of the thesis.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

The present project was initiated with the aim to create pattern modules for use in public environments. My intention was to let the properties, of the specific materials used, have a marked influence on the realisation of the final form. I also wanted to find a material, which is suitable from the perspective of sustainabilityand possibilities to create modules from it. The work was initiated with a study of some candidate materials and many sketches before I finally made my choice. My decision was clear after a visit to the company Glasfabriken inKalmar.

Today the milk production per cow is increasing but the milk delivered by the Swedish farmer contains less amounts of fat and protein than earlier. The contents have decreased since 1993. In average the milk contain 4,2 percent fat and 3,4 percent protein. Earlier the fat content in milk was important. Nowadays the dairy?s attention has turned to the milk?s valuable proteins, principally the caseins, which have a considerable nutritional value and are important for several dairy products like cheese and yoghurt.

My main purpose with this paper of John Steinbecks Of mice and men is to both analyze the long-lived structures and the unique individual destinies of the novel. I employ the method of the historical Annales-movement and use three divided levels in my analysis to try to capture these high structures and low moments of humanity in Structure, Konjuncture and the Individuality. The first level, Structure, is used to see how long-lived almost invisible geographic structures set the human act of condition. The second level, Konjuncture, is easier to grasp in understanding of time and embraces for example economic structures as the industrialism. The last level of Individuality is the fastest in time and easiest to understand but in the long run also the least important.

This essay describes and compares the extensive reindeer management to the more intensive, but grazing based, sheep management system in Sweden. Differences and similarities between the two production systems will be investigated by elucidating the economy, land use and possibilities to influence production and economy through breeding, feeding and product development. The reindeer management area covers the northern part of Sweden whilst the sheep management is dispersed over the country. Both reindeer and sheep are ruminants and have relatively high demands on the quality and digestibility of the feed however reindeers graze on mountain-and forest lands whilst sheep often graze inaccessible areas or cultivated grasslands. Selection intensity is generally lower in the reindeer management compared to the intensity in sheep breeding.

Planering och förändring av strukturen bakom en postproduktionspipeline, hur hanterar man materialet och vad är det som påverkar. Mina tre huvudsakliga frågeställningar har handlat om hur filstrukturen ser ut och hur den skall förändras. Hur en namngivningsstandard av filer kan underlätta handhavande mellan alla i produktionen, och sist vilka format man använder sig av. Slutresultatet är en startplattform från vilken det fortsatta arbetet med förändringar av företags- och projektstrukturen, kan ta vid..

The price of farmland has risen sharply in the last 20 years. This has led to discussions about what creates the value of farmland. The aim in this study was to try and find what factors are affecting the price on farmland. The area that is studied is the counties around Mälardalen during the period 2005 to 2009.The method chosen to achieve the objective is the hedonic price model. The variables are chosen after a preliminary study where a literature search has been made and a number of interviews with people in the industry.

The energy in laundry rooms, in form heated air, can be utilized with a heat exchanger. A concept and an early prototype of the heat exchanger have already been developed to show that the theory works. This report describes the continued development and construction of the product.A field study was made in order to investigate the environmental usage and establish the product design. The most common washing machine was used as a calculation model, and calculations were also made to estimate the amount of energy in the air. A previous analysis of the existing prototype is also presented in this report, to show the products potential capacity.

The cost of transportation has strongly increased in the recent years, transportations which are a major part for the construction companies. Skanska Asphalt which is a part of Skanska Sverige AB has noticed that there are significant cost savings to be made with the purchasing of transports. The transports in this case is about asphalt, where the costs are about 10% of the outsourcing business turnover. The purpose of this thesis is to study the working practice that Skanska Asphalt are using today in controlling and time-writing, for the asphalt transportations. Resulting in recommendations on how to improve the working practice at Skanska Asphalt.This study was conducted with the help of a number of interviews with Skanska?s employees and with suppliers of transportation to describe the practices which are being used in during the asphalt transportation.

South Africa has been among the top ten wine producing countries for at least 20 years. Even though the land under grapevines is decreasing globally it is still increasing in Africa. The awareness of environment has strengthen the last years and South African producers experience a high demand of environmentally friendly produced wine, especially from the European market. This demand was the driving force behind the development of the world unique sustainability certification, Integrated Production of Wine (IPW), which is inscribed in the South African legislation. What makes this certification unique is that consumers can trace their product all the way back to the farming practices owing to the identity number specified on the IPW Integrity & Sustainability seal on certified products.

When building large buildings, such as compartment buildings, there is a number of deliveries arriving on the construction site daily. In order to receive these deliveries without disturbing the rest of the work going on JM often books a fixed unloading time. When doing that they can be prepared when the delivery arrives. Making sure there is a suitable unloading area, someone to meet the delivery and when needed proper machines, such as a tractor or a crane, to help unload bigger deliveries. The person receiving the delivery is supposed to make an acceptance control where they check the delivered goods making sure nothing has been damaged in transport and that they have received what they were supposed to receive.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Biogas is increasingly used for fuel in for example vehicles and it´s produced in a biogas processconsisting of the steps of pretreatment, digestion and gas cleaning. The pretreatment is a method usedto increase the gas production and / or destroy pathogens. The digestion is the stage when anaerobicmicroorganisms convert bio-mass of a substrate to a raw gas containing about 65% of methane. Thegas cleaning is used to increase the methane content to about 97% so the gas can be used for motors invehicles. The biogas part of the Ekeby sewage plant in Eskilstuna is using multiple substrates.

In recent centuries the Swedish Tiled Stove has varied in its design with an aesthetic evolutionary history that has not only followed the architectural and artistic ideals but also the taste in stove design. The heat source has varied depending on the regional traditions and where it was located within the country, but the inside of the construction was of a similar five channel system. The purpose of this paper is to study and compare the design of tile matrices made by Emil Petterson with other Swedish stoves. The following questions will be addressed:What characterized the production of a small scale tile stove workroom during the years 1900-50? Which main styles can be described as Emil Pettersson?s ideal while producing his matrices? And finally, is it possible to study the tile stove matrices as objects of historical and cultural significance, and what difficult methodological issues might occur in the doing of it? To answer these questions I will present the results of the documentation of Pettersson?s tile matrices with detailed historical categorizations and schedules. The conclusion shows that Pettersson as a stove builder and -producer was characterized by eclectic ideals and a design shape based on more liberal interpretations of contemporary trends.