In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

This study investigated whether in-situ audiometry, delivered via hearing aids, is a better option as a basis forprescribing hearing aid amplification, compared to conventional audiometry. By examining the real ear insertgain (REIG) in 29 ears (18 subjects), that had been fitted with a hearing aid programmed using both conventionalaudiometry and in-situ audiometry, the study looked at whether in-situ audiometry based prescription is closer tothe NAL NL1's fitting target than audiogram based prescription. The hearing aid Siemens Pure 7mi with speakerunit M was used on all participants. The results showed how in-situ audiometry based gain at certain frequenciesis more consistent with the target curve, especially at 1000, 1500, 2000 and 4000 Hz. It was not establishedwhether the findings of the study were statistically significant.

ABSTRACTSofie Haag: Yrke: Operaproducent. En studie av operaproducentens roll och betydelse Sverige 2008. Uppsala universitet, Institutionen för musikvetenskap, 2009.The aim of this essay is to provide a better understanding of the role of the Swedish opera producer (often called "production manager") and the opera organisation in which he/she works. Very little has been written about this role, in Sweden as well as internationally. To fill this apparent gap, this study presents the results of inteviews with representatives of ten of Swedens´opera organisations, as well as three case studies.

The development of software was considered until the beginning of the 1990th as a cathedral like product development in closed companies. This way of development changed in the last decade. Open source software (OSS) development challenged this consideration significantly. OSS is produced in co-operation by skilled people, distributed and used by many moral agents. The result, the software itself, can be studied and modified.

The biogas plant Kungsängens gård, owned by Uppsala Vatten och Avfall AB, produces biogas and biomanure from organic household waste, food processing waste and slaughterhouse waste. In year 2012, 4.4 million Nm3 of biogas were produced from 25 200 tons of waste. Before digestion all substrate is sanitized by pasteurization at 70°C in order to kill pathogens. Another method, integrated thermophilic sanitation (ITS), is of interest in order to decrease the energy demand. The method implies that the substrate is sanitized during ten hours in the digestion chamber, where the temperature is 52°C.

Deltaco är ett medelstort företag som säljer IT-relaterade produkter till datorbutiker, installatörer, industrikunder etc. men ej till slutkund. Deltaco har ett dotterbolag i Finland och ett i Danmark och flera avdelningar i Flemingsberg. Examensarbetet gjordes på avdelningen som heter RMA ( Retur Material Authorization). RMAs uppgifter är att ta hand om returnerade produkter som omfattas av garanti.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Wind power is a growing energy sector in Sweden. However, it still represents only a small part of the total electricity production, about 0.7%. In order to create good conditions and to facilitate the establishment of wind power in Sweden, the government has for example, created a national centre for wind use. The objective has been to reach the governmental goal, which is an expansion of wind power by 10 TWh by year 2015 compared to the level in 2002. The Swedish electricity market was deregulated in 1996 which refers to the introduction of a competitive market in electricity production and trade.

The Nasometer is a non-invasive acoustic measuring instrument that quantifies the ratio ofnasal resonance in speech. It can be used as a complement to perceptual judgment of speech impediments, for example, in patients with cleft palate and velopharyngeal insufficiency. Inorder to determine if a nasalance score is abnormal, it must be compared to norm data. The main purpose of the study was to collect reference nasalance scores in children between fourand five years of age in Linköping. An additional objective was to compare the results tonorm data collected in Umeå.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Sudan has always showed great potential in the poultry industry, but it has not been until now that this potential has blossomed and is growing quickly. As large agribusinesses1are taking over the market shares within the urban areas, smallholders2 have been put out of business. They are not able to compete with mass production and lack financial assets to improve their production techniques. Contract farming is defined as initiatives from agro industrial companies to secure access to smallholder produce and has in developing countries become a way of allowing the poor to participate in a larger market (Farrington, 1999). The aim with this study was to investigate the suitability of implementing the contract farming concept within the poultry industry in Sudan today. The study is a qualitative field study and the authors have conducted qualitative interviews with respondents involved in the poultry industry in Sudan.

In the country of Jordan, egg production is very important economically, but several bacte-ria are involved in food borne diseases transmitted from eggs or other poultry products. The most important are Salmonella spp., Campylobacter jejuni and Escherichia coli. In Jordan two different housing systems are used for hens in large scale egg production; con-ventional cages and litter floor systems. Eggs from four different farms were analysed and compared to see if a difference could be found regarding the presence of pathogenic bacte-ria on the egg surfaces between these two systems. Total number of aerobic bacteria was analysed, the presence of Salmonella spp., C.