Röntgenläkarna väljer ofta att byta undersökningsteknik för att fastställa misstänkt patologi som inte går att diagnostisera med en metod. Vid röntgenundersökningar av sinus (bihålor) så kan läkaren välja mellan konventionell röntgen eller en datortomografiundersökning. Skälet är att diagnoser som tumör, benpåverkan eller ansiktstrauma inte avbildas lika bra med den konventionella metoden. Syftet med den här studien är att jämföra datotomografi och konventionell röntgen vid sinusundersökningar, vilka för och nackdelar som de olika metoderna har, hur bildinformationen och diagnostiken skiljer sig, vilka risker som finns med joniserad strålning samt vilka biologiska effekter strålningen har på människan. Intervju har gjorts med odontologi läkare som berättat om för och nackdelar med de olika metoderna, och litteratur och artiklar har gett kunskap för att komma fram till resultatet.

This study forms part of the R&D project "Improved survival of bird chicks in organic fields" managed by the Rural Economy & Agricultural society in Uppsala. The skylark (Alauda arvensis) is a species that has decreased drastically in Sweden as a consequence of more intensive cropping. Studies in England have shown that skylark reproduction can be greatly improved within conventional fields, at a low cost, by establishing patches of bare ground (skylark plots). Within conventional farming, herbicides can be used in case a weed problem arises due to implementation of these skylark plots, whereas this is not allowed in organic farming. This study examined the effects of skylark plots on the weed culture in organic autumn-sown (winter) cereals and whether weeds might cause long-term problems to farmers. The study was conducted in two parts; a field study and a review of the literature regarding the weeds observed. The field study was carried out in 2007 during three weeks in June and three weeks in July, on eleven organic fields with winter cereal in the vicinity of Uppsala.

There is a common belief that the arts contain knowledge of creativity that can enrich the business world. Similarly, the arts are in need of additional support from the private sector and know-how of business practices. In short, there is a need for mutual understanding. With my background as a dancer paired with my studies at the Stockholm School of Economics I have taken the challenge of bringing the two worlds closer together. By changing a social system, like an organization, it is possible to get a better understanding of it.

Results have shown that flow batteries may be a solution in the future as an effective and environmental friendly method to an energy storage system (ESS). The technology is reliable and has a high efficiency that comes with low energy losses and a long lifetime. The range of possible fields is suitable for cutting energy peaks in the power grid, by always have a ready and available energy storage that balances the production. By comparing the advantages of flow batteries with conventional batteries it is mainly the fact that they can conserve energy for a long time without being self-discharged thanks to that the storage capacity is in principle endless and limited by the size of the electrolytes tanks that makes them a great energy storage system. The batteries won?t take any damage or decrease in performance when charging or discharging it or if you exhausts it to 100 % and leave it discharged for a long time.

This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

The purpose of this study was to examine whether a L2 learner could correct or imitate structures of the language that they could not produce in written production defined by processability theori levels.The Informants had Arabic as their mother tongue. The study showed that the ability of correction developed slower than the capacity for imitation and the ability to written production. The ability of the correction developed by the duration of the stay. The result was a confirmation of theory formation in processability theory. Corrective elicitering could be developed into a useful diagnostic tool in the classroom and thus provide an education that followed a natural learning order according to processability theory by Pienemann.Keywords: processability theori, imitation, correction, written production.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

Hammarby Sjöstad is a new district in southern Stockholm. A main objective with the Sjöstad project was to halve the environmental impact compared to other construction work. The environmental goals involve a halved water consumption rate, a local treatment of storm water and trials aiming to extract nutrients from the waste water. Sjöstadsverket is an experimental treatment plant used for testing new treatment processes for domestic waste water from Hammarby Sjöstad. The results are to be compared with the conventional process used at Henrikdals treatment plant today.

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

In Sweden we need more lambs during March to June. I decided to calculate on a spring lamb production, because to many of the Swedish lambs go to slaughter in the autumn. I counted on 1000 ewes which have 2000 lambs each year, 200 of these lambs stays on the farm and replace old ewes. The buildings are 3600 square meters. I have counted on two different sorts of buildings, the first one is a shed, the second one is three polytunnel sheephouses.

Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

This essay analyzes the production process in connection with the original play Utopia 2012, which premiered at Backa Theatre, Gothenburg, Sweden on 27 October 2012.The aim of the essay is to seek a deeper understanding of this particular production process. No universal process plan was employed when creating Utopia 2012. Therefore, taking into account artistic, technical and administrative aspects of the work, a chronological process map has also been constructed in connection with this essay, in order to clarify each step of the theatrical working process.The theoretical approach is hermeneutic, and the material is based on interviews with key individuals with different professions and functions within the working process in order to gain multifaceted perspectives and results. The interviews took place at Backa Theatre with the exception of those held by telephone with the project?s two producers, both of whom by that time no longer worked at Backa Theatre.The findings of the essay mostly indicate that, with the significant exception of director Mattias Andersson?s artistic vision, no fixed process map nor explicitly articulated common goals were employed in this particular theatre production.