The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

Dairy farmers using artificial insemination (AI) are dependent on effective oestrus detection. In Sweden, AI is used for a majority of all dairy cows and oestrus synchronisation with hormones is not allowed. There are reports of declining ability to express oestrus with higher levels of milk production. This makes oestrus detection more difficult. Several aids for oestrus detection have been developed, for instance pedometers and mounting detectors.

The aim of this study has been to discuss ideas of knowledge within classification theory and subject analysis in the light of theories of fundamental changes in the production of scientific knowledge. Guiding questions have been: How have the conditions of knowledge production changed? How has interdisciplinarity as part of this development evolved? What assumptions lie behind theories of classification and subject analysis? How do these stand in relation to the alleged changes in the production and understanding of science? Three works about the changing conditions for knowledge production and the growth of crossdisciplinarity have been presented and discussed. These works stress the loosening up of boundaries between traditional knowledge domains and open up for discussions about how to organize knowledge production in the light of these changes. In the study it is argued that their works also could open up for discussions about the way knowledge is organized for retrieval purposes.

The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

Background: Since the coining of the phrase lean production by Womack, Jones and Roos in 1990, this mass production system of Japanese origin has been implemented in a multitude of organizations throughout the world, the results being predominantly positive from a financial point of view. The possibly negative effects of mass production on worker motivation have been discussed since quality of work life became an important political issue in Sweden in the 1970?s. As the popularity of lean service is now increasing, there are still unresolved issues regarding the transferability of a mass production system to the service industry, particularly with regards to the motivation of service employees.Purpose: The purpose of our thesis is to study the lean system of a Swedish bank, SEB Way, from a management- as well as an employee perspective in order to describe how lean may affect the work motivation of service employees.Research procedure: The study is empirically based on observations and interviews on multiple hierarchical levels at SEB. We have conducted a total of 13 interviews with front line employees at SEB, with the central SEB Way team as well as two external lean specialists.Results: The study indicates that SEB Way has little direct influence on the intrinsic work motivation of the SEB front line employees, as work motivation was present prior to the implementation of lean.

The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price. They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The aim of this study was to investigate which elements that functioned in a positive way on the natural behaviors of dairy cattle among KRAV certificated and conventional farms. The study was based on reading of earlier research and completed by interviews with farmers, animal health inspectors and consumers. The results showed us that the KRAV certificated farms used only loose housing barns and that the cattle were allowed a pasturetime of five months, or more, in one year. Our interviews with the consumers confirmed that KRAV was a well known trademark. The conventional farms were more flexible in their choice of housing systems, and used both loose housing barns and barns with the cattle tethered.

The aim of this study was to investigate the production of knowledge that can emerge in the use of Practice Research by Mirror method. This by finding out what it is in the practical work that leads to the production of knowledge and how knowledge production takes form. The empirical data that form the basis for this study is recorded group within the Mirror method discussions and a focus group interview with social workers who participated in the discussions. Those who have participated are social workers with experience from working with financial aid support and only real cases have been used in the discussions. The results have been analyzed according to Lipsky's theory of street-level bureaucracy and their discretion and Fook and Gardner´s theory of critical reflection.

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

Aquaponics is a food production system consisting of a consecutive cultivation of plants and aquatic animals, fish or shellfish, in recirculating water. The plants feed on the nutritious effluents from the fish tank and bacteria converts ammonia from the fish tank into nitrate that is absorbed by the plants. The plants receive nutrition and the fish gain purified water. The environmental impact of the production of fish meal and fish oil used in conventional fish feed includes a large consumption of fossil fuels with subsequent carbon dioxide emission. The aquaponic system can be made environmentally sustainable and self-supporting if supplemented with a vermicompost/vermiculture for the production of worm protein as a fish feed. Vegetable waste from the hydroponic part of the system can be reused as worm feed in the compost and the protein rich worms can be harvested, dried and grinded and brought back to the aquaculture as fish feed. As a first step in this direction, I have investigated the effect of recycling of vegetable waste in vermicomposts on the growth and number of earthworms (this was evaluated after harvesting). The hypotheses were that earthworms can be cultivated in the vegetable waste and that by adding manure to the vermicompost it is possible to obtain a nutrient content adequate to support a continuous worm harvest, in other words create a vermiculture. Eisenia fetida and Dendrobaena veneta were grown in 20 L bins containing peat mixed with either poultry or cattle manure. The proportions were 70% peat and 30 % manure. Discarded plant parts from lettuce cultivation was added to the vermicomposts (35 g per week) and water was supplied with 0.8 L per week.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Background: Mass customization has been identified as a competitive business strategy by both companies and academics because of its ability to incorporate the voice of the customer into companies? products and services. Although mass customization may sound appealing, the strategic concept is still developing and firms adopting this business strategy face several challenges. Production concerns are of high relevance since mass customization implies a high level of customer involvement in the product design. Since the areas are closely linked it is reasonable to ask how a mass customization strategy affects production concerns.