An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

Water hardness indicates the concentration of calcium and magnesium ions in water. Water with high concentrations of these ions is described as hard water and water with low concentrations is described as soft water. Water that is too hard or too soft can lead to technical and economical problems. In collaboration with Midvatten AB, groundwater hardness in the Badelunda esker between Leksand and Avesta has been mapped, and an attempt has been made to explain the variations. For this purpose, different GIS programs, such as ArcView, ArcInfo, IDIRISI, and one geochemical modelling program, PHREEQC, has been used.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Akademiska Hus owns and manages the university facilities in most university towns in Sweden. Bilbergska house in Örebro was built in 2008 by Akademiska Hus, and designed by White Architects. Today's buildings must meet accessibility requirements determined by Swedish Board of Housing, and it is the developer who must ensure that they are fulfilled. Swedish Board of Housing requirements are often vaguely written and interpretation space is large.This report aims to investigate how much of the requirements which are set towards the University and landlord Akademiska Hus are being achieved. This is done by studying the requirements that are set.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

This study focuses on romantic friendship between women in three Swedish novels written between 1836 and 1857: Sophie von Knorring?s (1797?1848) Illusionerna (1836), Fredrika Bremer?s (1801?1865) En dagbok (1843) and Marie Sophie Schwartz? (1819?1894) En fåfäng mans hustru (1857). Also, the connection between women and passion as well as the interesting occurrence of step- and foster mothers is looked upon in the study.The romantic friendship is freely expressed in these novels; love between women is neither presented as unnatural or unchaste. It both challenges the heterosexual matrix? claim on intelligibility and its rules for how desire should be expressed.

The strategy when you change the visual part of the brand identity is often referred to as Corporate rebranding and is seen as a good way to show that a company has undergone a change. Despite high risks and high costs, this strategy has become more common and there are companies today who make the choice to change an already well-known graphic profile. This phenomenon is what underlies this essay?s problem statement: Why does a company with an already well-known graphic profile choose to change it and how does the process behind the change occur? In what way have the company?s customers recognized the change and how has the company?s image changed in this context? The purpose of this essay is therefore to explore the process that occurs when a company in the sport and fashion industry changes its visual identity and to explore how the company?s customers have perceived the change.To fulfil the purpose of the essay a case study was carried out on a company?s Corporate rebranding process. The company that was chosen was the Swedish sports retail chain Stadium Sweden AB who decided to change its graphic profile even though their logo was one of the two most recognized in their field.

The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

During the spring semester 2012 Robin Westlund has accomplished ?Controlled interaction for more creative meetings - Summit Flexiwall? with the individual focus on social communication based on visual interaction in future office. The project was a part of the course Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which includes 22,5 ECTS Credits. The course is a part in the program Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.Assigner of the project was Moelven Eurowand AB with their head office in Örebro. The company manufactures and assembles entire room solutions for offices.

AbstraktHaving influence over questions that concern us is a part of the society that we live in, where every individual have the right to make her voice heard (Danell, 2006). For many decades, the school has had many different ways to give the students influence. Rönnlund (2013) is giving a historical overview of the history of students influence and enlighten us how the influence has changed over time. The influence from the students is very important and it is the students right to make their voices heard about things that concerns their work environment but also to affect their curriculum. The education in school should be fitted to every individual student (Danell, 2006).   According to Aaron Antonovsky (2007) our wellbeing is based on that we all can take part and deicide about the things we are meant to do.

Haemonchus contortus is the most important bloodsucking gastrointestinal nematode in small ruminants worldwide. It is often controlled by anthelmintics. Even though other methods to control are available, the most efficient way to treat an animal with clinically manifested haemonchosis is to use one of the available broad spectrum anthelmintics: benzimidazoles (BZ), macrocyclic lactones (ML) or imidothiazoles-tetrahydropyromidines or the narrow spectrum drugs salisylanilides or nitrophenols. Anthelmintic resistance (AR) against all groups of anthelmintics in nematode parasites has been reported from many countries, and even multiple AR has been observed. In this study I have investigated the resistance levels to all major classes of broad spectrum anthelmintics in a naturally infected flock of sheep of Red Maasai sheep (RM), Dorper sheep (D) and their offsprings on a research farm in Kenya.

The aim of this study was to explore and gain understanding of the situation between managers in different forms of human service organizations. I chose to use a qualitative method and conducted semi-structured interviews with five professional middle managers in the public sector. To accomplish my purpose, I worked on the basis of several questions. The questions dealt with the role of middle management and what it involves, how it is perceived and what the middle managers think of the specific requirements for them and their leadership in organizations that provide services relating to people.  As a result of the analysis I have used the theory of social roles that describes the meaning of the different roles and role conflicts that arise in connection with various and conflicting expectations. The review of the results shows that middle managers in human service organizations experience to have to deal with a complex leadership role.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

Introduction: Reversal of a temporary loop-ileostomy is the final step after a long treatment for rectalcancer, an event that the patient has been looking forward to for a long time. Studies have shown that patients often have a significant impact on the bowel function after reversal of the stoma.Aim: To describe how the patient experienced the first time at home after reversal of a temporary loop-ileostomy due to rectalcancer. Method: Qualitative semi-structured interviews, with 15-20 patients who have undergone reversal of a temporary loop-ileostomy due to rectal cancer, will be conducted. The interviewes will be analysed using qualitative content analysis according to Graneheim & Lundman (2004). The patients will be recruited from the colorectal unit at Sahlgrenska University hospital/Östra and from the surgical unit at Kungälvs hospital.