An increasing number of scholarly publishers are beginning to make their journals available electronically. At the same time there is a growing amount of exclusively electronic journals freely accessible on the Internet. These are facts that librarians have to take into consideration.This master's thesis aims to describe the electronic journal and its role in Swedish academic libraries. In a review of current literature about electronic journals, the authors discuss their strengths and weaknesses, and their impact on scholars, publishers and libraries. To investigate the situation in Sweden, a questionnaire was sent out to 43 academic libraries.Questions were raised about the selection and acquisition of electronic journals, access, technology and economy.The results show that almost half of the 35 responding libraries offer electronic journals to their users.

This master thesis in energy optimization was made during the autumn of 2006 at Käppala wastewater treatment plant in Lidingö, Stockholm. A preceding thesis, where all electricity consumption was mapped, showed that the aeration in the biological treatment is the single largest consumer in the plant, and it is therefore of interest to reduce this cost. The oxygen control strategy used at Käppala WWTP is working well from a nutrient removal point of view, but not from an economic one. The last aerobic zones have a very low oxygen consumption during low loading periods which give rise to enhanced dissolved oxygen concentrations with excessive costs and reduced denitrification as a result. But also during periods of normal loading unnecessary high oxygen concentration are sometimes given.By modifying the aeration control strategy three full-scale experiments have been made, with the intention to reduce the air consumption.

The purpose of this essay has been to examine whether attitudes and behavior among Swedish people who takes snuff are dissonant or not and how their attitudes are affected by the media debate about the health risks snuff can cause. Furthermore, we were interested in finding out how different reference groups´ attitudes would influence the attitudes and the willingness of people to stop taking snuff and investigate how much control the people who take snuff think they have. To answer these questions we chose to ask primarily students at Stockholm University and Södertörns Högskola. The students were asked to fill out a questionnaire with 22 questions and the 100 responses we collected were worked up in a statistic program, SPSS, on the computer. The main models used for the essay and for the questionnaire were the Theory of Planned behavior and the Dissonance theory.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

This thesis aims to investigate the voting premium for companies differentiating voting rights between share classes on the Stockholm Stock Exchange. The voting premium represents the value of a vote attached to the share. The voting premium can be estimated from the price premium between two listed share classes with differentiated voting rights. Rydqvist's dissertation (1987) serves as a model for this study which investigates whether the theory of the so called "oceanic games", along with a proxy variable for cost of control, can predict the voting premium during 2010-2012. To the original model developed by Rydqvist, control variables for differences in liquidity between share classes are added to investigate for an increase in the explanatory power.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

AbstractThis thesis examines and discusses a sample of the medieval hypocausts (stone-heating ovens) in the Baltic area. The medieval construction is thoroughly explained as well as the antique hypocaust in order to establish a base for the following discussion. The medieval hypocaust has been almost forgotten for a long period of time. The last time someone dealt with this category of finds were in the 1960?s by Swedish archaeologist Iwar Andersson and in the 1970?s by Danish archaeologist Johannes Hertz.

Sammanfattning Titel: Riskanalys i Utvecklingsprojekt Författare: Marina Mattsson, Johanna Olofsson, Louise Larsson Handledare: Eva Lövstål Institution: Managementhögskolan, Blekinge Tekniska Högskola Kurs: Kandidatarbete i företagsekonomi, 10 poäng Syfte: Med utgångspunkt från problemdiskussionen är vårt syfte att ta fram dimensioner som är lämpliga för att beskriva hur utvecklingsprojekt gör riskanalyser och vad dessa innehåller. Metod: Vi har i vår uppsats använt oss av en kvalitativ metod. Vi har genom muntliga intervjuer försökt reda ut hur man i produktutvecklingsprojekt gör riskanalyser. Vi har läst forskningsartiklar och litteratur för att sedan gå ut och göra vår empiriska undersökning. Detta för att göra jämförelser mellan författarna och projekten. Slutsatser: I de produktutvecklingsprojekt som vi har haft tillfälle att studera gör alla riskanalys.

In recent years, several scandals have been revealed where public employees been involved. Some researchers argue, moreover, that the NPM's rampage has led to an increase in the risk of corruption in public administration. The Regulation on Internal Control shall, according to the government, lead to adequate protection against corruption by analyzing and managing risks. However, Riksrevisionen have criticized the authorities' protection against corruption to be too unstructured and unsystematic. In addition, they questioned whether the regulation really has significance in the work against corruption.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

This report is an inventory of the street lighting in half of the residential estates owned by Karlstad Bostads AB, a public housing company. The inventory was made to reduce the environmental impact of the street lighting. From the inventory an estimation of the total installed power and the energy consumption was made. The total estimated power of the street lighting was 125 kW and the energy consumption was 500 000 kWh/year with an estimated running time of 4 000 h/year. The dominating source of light was 125 W discharge mercury lamps.