The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

???This study has been made with the purpose of gaining an understanding of how a Swedish company may think and act concerning their internal control. An American body, COSO, have for some time published documents containing guidelines for how companies should go about this process, however, when conducting this study we were not aware of the extent to which companies in Europe and mainly Sweden used them. In order to learn about this, and also to gain an understanding of when these guidelines are appropriate, we conducted a case study with a large-sized, multinational Swedish company. We also conducted an interview with an expert in internal control monitoring, Anna-Clara af Ekenstam of Pricewaterhouse Coopers, in order to get the perspective of the evaluators in this process and to gain some insight as to whether our case is typical in Sweden or not. We found that our company disregards certain aspects of internal control condoned by COSO, while performing better on other dimensions.

This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

The research objective of this thesis was to conduct a holistic evaluation of an operational information system. By holistic evaluation we mean that an equal focus was placed on both the system system perspective and its users user perspective, in the actual environment where the system and its users function contextuality. In addition, the methodological objective of the study was to test a new research approach in a real life setting. The participants of the study were twenty newspaper journalists employed at Göteborgs-Posten GP. The information system NewsLink is a manually indexed full-text database containing all articles published in GP since 1994.

An inflammatory reaction is induced after release of proinflammatory mediators such asinterleukin 1 and 6 and tumour necrosis factor ?. These mediators stimulate the liver tosuppress the syntheses of albumin and endure the syntheses of acute phase protein forinstance C-reactive protein. The aim of this paper was to perform a method validation on animmune turbidimetric assay to quantify C-reactive protein in canine serum at the laboratory atSkara Animals Hospital, Skara, Sweden. The validation involved evaluation of the assaylinearity, precision, stability and recovery.The method was proved to be linear for both TruLab control and Medinor control.

The Swedish National Heritage Board (RAÄ) is the agency of the Swedish government responsible for heritage and historic environment issues. During the last couple of years the agency has implemented a new management Control system, the balanced scorecard, originally developed for profit driven organizations. Organizations within the public sector have other objectives than profit seeking organizations, and there have been difficulties in applying the balanced scorecard model in the public sector. Therefore we find it interesting to examine the reasons behind these difficulties and believe that some answers can be found in the identification process of the balanced scorecard. Therefore we aim to perform a case study of RAÄ and explain how the identification process of the components of their balanced scorecard can affect further usage of the model as a management control tool.

The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.

This report describes the design and construction of a prototype that automatically aims a microwave link towards a target. The link, that is located on a mobile aerial mast, is used by Saab Training Systems as a part of an infrastructure network. The report also discusses the development of a GUI that communicates with the control unit by Bluetooth.The control unit, called Pan/Tilt-controller, controls the position of the link by stepping motors. One motor controls the azimuth angle and the other one controls the elevation angle.By a GUI the operator enters the coordinates on its own position and the targets position. Hereafter a bearing is calculated and it will be sent up to the control unit.The control unit will sense its own direction by a magnetic sensor that works as an electronic compass.

Speaking of budget and budgeting is almost as adding fuel to the fire. The subject evokes a lot of emotions, both positive and negative. Some might consider budgets as a bureaucratic process that won?t lead to any good. Others might find budgets as extremely helpful and necessary in a company?s planning process.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the Control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

In past decades information technology has changed the conditions of organizations, not at least within the industry. Advanced IT systems have become a fact in order to cope with rapid changes in the market and to effectively manage an organization?s knowledge. When organizations became more flexible and customized expectations from customers and stakeholders also become higher. These expectations and guidelines are documented in a company?s management system, which can be designed differently depending on what standards the company chooses to implement.

Husqvarna AB uppmärksammade att det kommer införas nya miljöregler i Kalifornien gällande diffusionsutsläpp. De åkgräsklippare som går under namnet Rider och tillverkas av Husqvarna idag uppfyller ej dessa krav. Dagens bränsletank är tillverkad i plastmaterialet HDPE och avdunstande bränsleångor klättrar lätt igenom tankväggen ut i atmosfären vilket ej är tillåtet enligt de nya reglerna. Vi blev tillfrågade om vi kunde lösa problematiken och ta fram ett system som kontrollerar de avdunstade bränsleångorna och se till att detta system uppfyller de krav som ställs i Kalifornien. Som blivande ingenjörer tyckte vi att detta var ett passande examensarbete med många olika områden involverade som materialkunskap, tillverkningsprocesser, produktutveckling samt inblick i ett större företags arbete. Vi har med detta examensarbete tagit fram ett system som minskar det miljövådliga diffusionsutsläppet med cirka 90 %.

Bakgrund och problemformulering: Tillgång till information är en naturlig och nödvändigkomponent för en väl fungerande ekonomistyrning inom företag. Sociala medier företräder enny våg av informationsflöde i form av ostrukturerad data. Denna ökade mängd ostruktureraddata har kommit att ställa krav på hantering och analys av denna, vilket i sin tur förändrarförutsättningarna för ekonomistyrning inom företag. Företag som kan hantera information påett effektivt sätt kan utveckla strategiska konkurrensfördelar. Dock finns det begränsadkunskap om hur information från ostrukturerad data kan och ska hanteras inom företag.Företag som inte anammar nya tekniker för att hantera och analysera stora mängderostrukturerad data riskerar att gå miste om viktiga konkurrensfördelar.Syfte: Att identifiera, undersöka och analysera hur information från sociala medier påverkarentreprenörsföretags ekonomistyrning.Metod: Undersökningsmetoden utgörs av en avslöjande singel casestudie.