The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

This report will outline a proposal for the improvement of the baggage sorting facility at Arlanda airport. Swedavia is a state owned company group that operates, owns and develops airports in Sweden. One of their main roles is to create accessibility needed to facilitate and streamline the work at the airport.Swedavia is constantly working to develop new solutions and enhancements that will help to standardize and automate the work at airports without major impact on climate and above all adapt these solutions to work.The project has been aimed to identify and isolate the problem at the check-in counter, investigate the possibility of setting a speed control on the DC motor driving the luggage conveyer belt at the check-in desk so that the luggage does not lose tracking already there, as well as evaluate the new sorting systems planned to be introduce in the upcoming refurbishment of the sorting area.To determine the parameters that are used to regulate the speed of the baggage conveyor belt, information about the inputs and outputs that participated in the process was gathered. Information was collected both practically and theoretically. Process was followed and monitored by the supervisor of the company, and a theoretical study was done separately on my own.

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

Syftet med studien är att undersöka huruvida interna och externa variabler påverkar personers friskhet samt utreda hur långtidsfriska skiljer sig från övriga medarbetare. Undersökningen genomfördes med ett frågeformulär bland personal med olika arbetsuppgifter. 150 medarbetare besvarade enkäten. De undersökningsvariabler som ingår i den interna skalan är personlighetsdrag, locus of control, KASAM och optimism. Den externa skalan består av krav, kontroll, stöd, ledarskap samt organisationskultur.

This study was performed to investigate how the Japanese sect Aum Shinrikyo was legitimating its violence and killing acts. By analyzing the leader and members of the sect, and applying this information on two theoretical models, this paper tries to give an explanation of both single acts of violence and killing, and two terrorattacks.The result shows that Aum Shinrikyo was able to legitimate violence and killing acts through its ideology. In their opinion, cosmos was a place with several levels and everyone wanted to get as high as possible. Those who were killed by the sect would never be able to get to a higher level by living, since they would do too many bad actions. The murderers also got better karma since they helped the person to a better place.The legitimating of violence and killing acts in Aum Shinrikyo can be explained as a duty that is holy, which agrees with the theorists about religious terrorism..

The essay aims to show n interpretation of Vampyr and Ordet; seen from a viewpoint Kierkegaards christian existentialism can enhance the understanding of mentioned movies. Central notions from Ks philosophy are explained and then the author points to examples of how this corresponds with the essence of the two movies.The argumentation is based on Ks thoughts on faith and human existence. Other theories concerning Dreyers movies, and to some extent his background, is also discussed.Finally the author concludes that he was right in his hypothesis: that it is possible to show an influence from Kierkegaards christian, existentialistic thoughts in the two movies.Moreover the author thinks that the chosen perspective works as a complement to other written material on the movies and that other writers on the subject have some problems summing up the contents of the movies from their different perspectives.The final conclusion is thus that an interpretation of the movies from a Kierkegaardian viewpoint increases the understanding of the same movies..

The essay aims to show n interpretation of Vampyr and Ordet; seen from a viewpoint Kierkegaards christian existentialism can enhance the understanding of mentioned movies. Central notions from Ks philosophy are explained and then the author points to examples of how this corresponds with the essence of the two movies.The argumentation is based on Ks thoughts on faith and human existence. Other theories concerning Dreyers movies, and to some extent his background, is also discussed.Finally the author concludes that he was right in his hypothesis: that it is possible to show an influence from Kierkegaards christian, existentialistic thoughts in the two movies.Moreover the author thinks that the chosen perspective works as a complement to other written material on the movies and that other writers on the subject have some problems summing up the contents of the movies from their different perspectives.The final conclusion is thus that an interpretation of the movies from a Kierkegaardian viewpoint increases the understanding of the same movies.

This paper describes a case study of the largest film production ever conducted in Scandinavia. The study aims at explaining the complex relationships in the network structure in which the project took place. Coordination of creative projects carried out in a network context, includes handling conflicting interest and contradictions. Creativity needs space and freedom while projects need structure and coordination, whereby controlling these projects becomes complex. Adding to the complexity, does the loose form of organization that the network structure represents, without any long term structure.

The term maneuver warfare is frequently used in western defense doctrines and theoreticaltextbooks. The ambition of the Swedish armed forces is to attempt maneuver warfare in allappropriate situations. Theories and doctrines indicate the importance of decentralized command and control systems. Mission command (Auftragstaktik) is one such system and should be applied to all situations of the Swedish Armed Forces. There are theoretical and doctrinal bases for warfare and command, but in practice, what are the preconditions for this? Previous research addresses many theoretical questions but there are flaws in existing studies investigating practical realities.The purpose of this study has been to reach a deeper understanding of armed forces ability to maneuver warfare by analyzing conformity of command and leadership perspectives in practice.This is an interview-based qualitative case study in which respondent´s statements were analyzed and interpreted in relation to a theoretical framework.

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.

Landfill leachate contains a variety of contaminants and is created when rainwater percolates the landfill. For landfill management the leachate is the main issue that can cause problems to the environment. At the landfill of Fläskebo, Renova AB treats the leachate in a local treatment plant. The treatment consists of a chemical treatment step with chemical precipitation, flocculation, sedimentation and filtration, and a final step with a carbon and peat filter. Renova has to ensure that the condition of the leachate reaches the regulation set for the landfill before it is released to the recipient.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

When driving hard and cornering on a circuit good control of a car?s roll is desired, so the car reaches steady state quickly but yet in a controlled fashion. This control is mainly given by the combination of the cars springs, shock absorbers and anti-roll bars.The aim of this report is to investigate, analyze and measure a Porsche Boxster?s turn in behaviour and roll dynamics as well as with the aid of simulation results give suggestions for improvement of the previous mentioned combination.Two different simulations were made, one based on a simpler model that was based on an evolved version of the bicycle model in Matlab and one was more advanced model in the simulation software rFactor. Measurements of the real car was made using a GPS-based measurement system.

The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.

I dagens samhälle blir det allt mer intressant att spara energi, dels med tanke på miljön och dels föratt minska på utgifterna. Denna energi ska sparas på ett sådant sätt att effekten för användarna blirså liten som möjligt.I denna rapport beskrivs hur ett reglersystem kan byggas för att minska energiförbrukningen hosväxthus genom att reglera belysningen på ett effektivt sätt. Systemet är helt automatiskt vilket göratt användarna inte behöver tänka på styrningen av lamporna alls när väl systemet är uppsatt ochkonfigurerat.För att styra lamporna på ett bra sätt mäts det inkommande ljuset med en PAR-sensor. Lampornatänds och släcks därefter beroende på ljusmängden och även på hur varmt, eller kallt, det är iväxthusen.Styrningen av belysningen sker med en mikrokontroller från Microchip, en PIC18F4620 som ärprogrammerad i C18. Kringkomponenter som portexpasioner, klocka och reläer användes också föratt bygga ett bra reglersystem.Resultatet är att det är möjligt att bygga ett reglersystem med begränsad budget som styr lampornapå ett effektivt sätt.