There are many aspects which must be taken into consideration when studying individuals? need of exercise. The study investigates if impulsivity and Health Locus of Control affect the continuity of physical practise. The main presumption was that individuals with high impulsivity, high Powerful Others and high Chance Health Locus of Control, would have a significantly harder time to maintain a continuous physical activity. The survey used two standardized tests to measure impulsivity and Health Locus of Control and in order to be able to measure the insensitivity and the periodicity of physical exercise, a test was developed by the authors.

Detta examensarbete syftar till att implementera en modulgenerator som automatiskt genererar ett matchat differentialpar. Detta för att enkelt kunna generera detta vanlig förekommande byggblock utan att behöva rita om allt från grunden. Modulgeneratorn som konstruerats klarar att skapa upp till 2x2 transistor block matchad layout med eller utan sköld. Programmet skapar med hjälp av indata från konstruktören en skräddarsydd layout som kan användas som byggblock i integrerade kretsar. Examensarbetet är slutfört och har genomgått omfattande testning The aim of this thesis is to implement a module generator that automatically generates a matched differential pair.

I begin my essay with a story that illustrates how a preschool activity organized on a modular work can be perceived. I describe how the environment has been rebuilt and modified to accommodate one large group of children instead of two smaller groups as before. Management´s justification for the change is that it is carried out to give the children better conditions for their learning, but my understanding is that it also hampers preschool-teachers´ abilities to implement their assignment.I try to understand what benefits module work by examining what well-known researchers believe is important for children´s learning in environmental and preschool teacher´s importance. When I use what I have learned to analyze my story, my opinion is that the change of the preschool activity not have just a positive impact but also entails that preschool teachers find it difficult to be present and in interaction with the children as several well-known researchers notes is important for children´s learning. I discuss how a large and rich environment at the same time can be perceived as incalculable for teachers, which can result in not all of the children being paid attention to in the preschool activity.

Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

In many clinical applications, it is desirable to transmit sensor information wireless. In earlier research, investigation transmit ECG signal using Bluetooth, was performed. However, when Bluetooth has some drawbacks it is of interest to investigate alternative methods, one such method is ZigBee. Bluetooth has higher data rate speed (1Mbps) than ZigBee (250kbps). However, Bluetooth consumes more power.

This thesis concerns the control of outsourced interorganizational buyer-supplier relationships in the low-price fashion industry. A qualitative case study has been performed on two supplier relationships of a low-price fashion company. By identifying specificities of the industry and relating them to control problems and their implications on control solutions, the thesis has established a relation between industry specific characteristics and the way companies in the industry control their supplier relationships. The analysis is based on a theoretical framework created by Dekker (2004). Amongst other factors, the difficulty to define, quantify and measure the design variables of a fashion good, the high heterogeneity between individual products and the difficulty to predict the trend based demand, create high coordination requirements as well as appropriation concerns solved through extensive formal control.

Aims The aim of this study was to investigate how personnel within food control are regarded from different perspectives and to find the answers to the sub questions:- what is included in the profession of food control?- what are the requirements for personnel within the profession of food control?- how is the profession perceived from different perspectives?- how do personnel within the profession of food control estimate their psycho social working conditions?Method The study included 68 individuals (34 female and 34 male) and was conducted via observations, web-based surveys and survey-based interviews. Conclusion - The study was feasible.- The overall goal of the study as well as the research questions were answered to and contributed to clarify what is included in the profession of food control. - Quality measures should be implemented to greater extent within the development of the national food control system..

Control of a diesel engine equipped with Variable Geometry Turbine (VGT) and Exhaust Gas Recirculation (EGR) requires a multivariable control method. One problem is that the engine system is non-linear. Furthermore there are strong cross-connections between inputs and outputs and the inputs have alsoboundaries. To be able to manage these control problems, MPC has been used that is a multivariable method. The MPC-controller consists of an optimization problem and therefore MPC can find the optimum control signals in an easy way.

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

The aim of this Master?s thesis is to examine the function of the budget as a means of control within an organisation in the public sector. To accomplish this, a case study has been conducted on a certain business unit within Luftfartsverket responsible for providing Air Traffic Control services. The thesis is built on a framework of contemporary theories of budgeting and includes a brief discussion of the weaknesses usually associated with the traditional budget. The conclusion of the study is that the use of budget as a means of financial control within Luftfartsverket is not efficient enough at the moment.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

Background: Inter-organisational ways of working have become more and more common during the last decades. In order to attain efficiency and productivity, such inter-organisational relationships need to be governed and controlled. However, studies have shown that inadequate control is one of the main reasons for why inter-organisational relationships fail. One of the means that can be used for governing and controlling a business is management control. The use of management control in inter-organisational contexts is a quite unexplored area of research at the present time, which might seem somewhat surprising considering the fact that inadequate control is a common explanation for why inter-organisational relationships fail.

There is limited research done in the area of management control in the relationship between companies. This study investigates management control in outsourcing relationships and the decision to change sourcing strategy and to insource functions. The empirical research was conducted at an international company, which in this study has been anonymized. The research is mainly based on interviews. To extend and verify the conclusions drawn, another company, AB Ph.

Suicide and attempted suicide frequently occur in society today and represent a major public health problem. In inpatient psychiatric care the nurse have a central role when caring for suicidal patients. Few systematic studies exists that address the nurse?s practical work with these patients. The purpose of this study was therefore to describe the nursing care of suicidal patients as it was perceived by registered clinical expert nurses.