The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

This master thesis reviews advances in detection and diagnosis of static friction (stiction) in control valves. Control valves suffering from stiction results in oscillating control loops which in turn decreases both the process stability and reliability. Perstorp AB sees a necessity to automatically detect stiction in valves before the effects of the malfunctioning valves have become too severe. This thesis presents an introduction to maintenance, control loops and how stiction in valves can affect performance of control loops.A selection of methods presented in the literature are introduced and examined using normal operating data from the site in Perstorp. Common for all selected methods is their intuitive ideas and that they are based on normal operating data and minimum amount of process knowledge.

There is consensus in research, policy, business and many other areas around the benefits of creativity. Previous research shows that creativity is only spurred under certain conditions. Usually creativity is not associated with concepts such as control, deadline or cost effectiveness. Companies, by contrast, have the need for control and management of their operations, which implies that the two processes can be difficult to reconcile. A company that wants a high creativity while maintaining control and management is forced into a series of organizational compromises.

In today's globalized world it is essential to achieve goal congruence within a multinational corporation despite the distances between the headquarters and subsidiaries. A case study has been performed to examine how control of sales units within a Swedish multinational corporation is achieved. Otley's framework has been used in the study to provide an overall picture of the control system where the analysis is based on five areas: key objectives and goal evaluation, strategies and plans, target setting process, incentives and motivation as well as information flows. To complement this framework, theories of convergence and divergence by Busco et al. have been used as well as theories of hierarchical control and self-control by Holmström.

The aim of this study has been to examine the role of control mechanisms when it comes to building relationships in a small business network. In order to reach this goal, we have performed a case study of a Swedish supplier of machines to the engineering industry, which acts as the exclusive representative of a foreign manufacturer on the Swedish market. Main results: A number of control mechanisms, both formal and informal, could be identified in the network. Their specific use, as well as relative importance differ between different actors in the network. In general, the importance of formal control mechanisms decreases as the relationship evolves over time and the importance of informal ones, mainly trust, increases in a corresponding manner..

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

Electromyography (EMG) is a technique that measures muscle activity, whichmeans detecting the electrical signals that travel through the muscle in connectionwith muscle contraction. This project deals with how EMG can be used tocontrol a computer game.The project is centered around the game 'EMG Track Game' which has beenconstructed as part of this work. 'EMG Track Game' is controlled by twoelectrodes fastened on the player. These are attached to two selected musclesand control the motion in one direction each, one up and the other one down.The game is constructed in the purpose of being used in several elds of application.Among these are as entertainment, training equipment and a tool inresearch related to EMG and muscles.To highlight a possible application a study concerning muscle control has beenconducted. It answers the question of whether players score better with theirdominant arm in comparison with their non-dominant one.

In the present thesis, we have studied the management control system in Enskede-Årsta-Vantör, one of Stockholm?s municipal districts, with focus on theories about New Public Management (NPM). When NPM was introduced, a number of complications arose. Some of these, along with the district?s solutions of the complications, are described and analyzed using e.g.

The purpose with this study is that examine if the contingency factors as sort of market and competition can affect the companies, which means of control they apply..

In theory, the management control of maintenance functions is described as problematic due to the nature of the work performed in the unit. The purpose of this thesis is to examine these predicted problems in practice. Further,the thesis aims at identifying how these control problems may affect the relationships between the maintenance department and its internal customers. A case study has been conducted in one of Sweden?s largest industrial companies to investigate the said control problems in practice.

This report evaluates whether an interpreted high-level garbage collected language has enough information about its memory behaviour to make better cache decisions than modern general CPU hardware.With a generational garbage collector, depending on promotion algorithm and generation size, around 90% of all objects never leave the first generation. This report is based on the hypothesis that, because of the low promotion rate, accesses to higher generations are sufficiently rare not to benefit from caching.To test this hypothesis, we built an operating system with a Scheme interpreter in kernel mode, where the interpreter controls the cache. Generic x86 PC hardware was used, since it allows fine-grained control of cache decisions.Measurements of execution time in this interpreter show that disabling the cache for generations higher than the first does not give any performance gain, but rather a performance loss of up to 50%.We conclude that this interpreter design is not an improvement, but cannot conclude that the hypothesis is false in general. We suggest building a better CPU simulator to gather more data from which to make better caching decisions, moving internal interpreter data structures into the garbage collected heap and modifying the hardware to allow control in the currently rigid dimension of where data is cached---for example separate control of instruction and data caches and separate data caches for different areas of memory..

With a changing climate, we can expect higher temperatures and more precipitation in Sweden.As the temperature increases, new weed species are expected to migrate in from more southerlylatitudes, resulting in requests for new techniques for weed control. In addition, we might see agreater number of weed species and higher biomass production due to increased concentrationof CO2 in the atmosphere.Increased understanding of the biology of specific weed species will become more importantin future weed control. This will help to control the weeds more efficiently. Higher prices onpesticides and a public demand for reduced use of pesticides make growers more inclined to usemechanical weed control on a larger scale and to a greater extent prevent weed establishmentbefore sowing. A well-planned crop rotation is the most important preventive measure, whichmight also include delayed sowing, and dark harrowing and sowing.Research takes place on many levels within the weed area and several alternative methodsare being developed.

By the year of 2007, 97 % of all listed companies in Europe had a CSR strategy described on their website. As the concept of CSR during the last decades has increased rapidly in popularity, a need to understand how such a strategy can be implemented has followed. While working with CSR in an integrated manner shows similarities to other popular management ideas, such as Lean and TQM, companies applying to a CSR strategy has been shown to be under higher scrutiny from media and NGO:s. Through a case study this thesis examines how these special circumstances of a CSR strategy makes The Body Shop use organizational control to avoid being subject to scandals due to not fulfilling the promises made to its customers. The results show that The Body Shop's commitment to CSR creates a need for a stringent bureaucratic control system that highly restricts the freedom of action for its employees.

The background to this study is the government’s investment in design and the increase of design education around the country. As a future design teacher (industrialdesign) at high school/college, it is of great interest for me to look closer at student’s attitude towards design and design educations at high school.Questions that have been investigated are student´s attitude towards design; design as a concept but also as a phenomenon. How does the student counselor inform the students of the differentchoices before choosing high school?Does the students view on design correspond to what the student counselor say?What opinion does the student counselor have to the concept design as well as design in highschool? Is design just a craze or here to stay?To get answers I have made interviews with student counselors at two different schools, I have also been in contact with a student counselor on the internet. Their thoughts will clarify thesituation that the students might be in.

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..