SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

The aim of this study was to design short interventions based on the literature study, which will change the pupils? posture on mathematics and connections between problem-solving in mathematics and everyday life. An experimental group of 17 pupils in fifth grade participated in the study and were educated in everyday mathematics 20 minutes a day during four weeks. The intervention was measured in a pre- and after questionnaire, in order to control the design and discover possible changes in the pupils? posture on mathematics and connections between problems and everyday life.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

This master thesis has been done at Enea Epact AB. The purpose of this thesis is to develop and implement a Link Quality Control algorithm for GPRS/EPGRS in the current testing tool. A Link Quality Control (LQC) shall take quality values from mobile stations and base stations and decide a codingsscheme that opimizes the throughput of data. The Advantage with LQC is that it adapts the used coding scheme to the channel quality. If the channel quality is too bad for the used coding scheme, a slower coding scheme with more redundancy should be selected.

BACKGROUND: The isolation facility is an important ward in veterinary hospitals. This is where infectious patients are treated in order to reduce the risk for cross-contamination between the infectious patients and other patients and humans in the hospital. But it can only function in a safe manner as long as adequate precautions for infection control are adhered to. This has shown to be a problem in many isolation facilities in veterinary hospitals in Sweden. AIM: The aim of this paper was to examine which factors that can affect the quality of the infection control in the isolation facility. The aim is also to stress the importance of adequate infection control practices. METHOD: Two interviews were conducted with staff from two veterinary hospitals.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.