This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

In this study we are seeking to discover the norms in the design of logotypes and how they havechanged over time. To achieve this we have chosen to analyze the logotypes of twenty companies withthe largest expenditure on advertising in Sweden. We mapped chosen design attributes within the logoto discover the similarities and then we selected the five oldest brands to analyze how their logos havechanged over time. The design changes in the logotypes over time is can be related to the changingattitudes of the general public and the designers ambitions to draw on convention to create iconic designthat will spark brand-recognition. However many changes can?t be directly explained through changesin convention.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

The purpose of this study was to investigate the relationship between Health Locus of Control, Exercise habits, Food habits and Self-esteem (Personal self and Physical self) between two groups of student teachers at a university in the south of Sweden. Is health such as exercise, eating and self-esteem something that is controlled by internal or external factors? Student teachers that participated in Physical and Health programme and student teachers that participeted in other programme were investigeted. The participants (N = 160) answered the questionnaire. The Health Locus of Control scale and Tennessee Self-Concept Scale were used.

Organisationspsykologi kan ibland upplevas allt fo?r problemorienterad med stort fokus pa? just problem och konflikter i organisationer. Det finns dock en inriktning pa? de fo?rha?llanden och processer som bidrar till att ma?nniskor, grupper och organisationer kan frodas och fungera optimalt. Denna studie syftade da?rfo?r till att underso?ka eventuella samband mellan positiv feedback, self-efficacy, locus of control och socialt sto?d.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Karriärcoaching är en tjänst som ökat kraftigt på den svenska marknaden. Tidigare studier inom området har visat att en stark självkänsla stärker en persons hälsa och underlättar för denne att hantera problem. Syftet med studien var att undersöka om karriärcoaching har någon påverkan på prestationsbaserad självkänsla, känslan av kontroll (Locus of Control) samt självbemästring av tankar och känslor (Self-Efficacy). Genom en enkätundersökning har en grupp som genomfört karriärcoaching jämförts med en kontrollgrupp som ej genomfört karriärcoaching. Ett oberoende t-test gav en signifikant skillnad i Locus of Control (p<.05).

This project has been about making a design suggestion for a boat accessory that adjuststhe distance between a sail-or motorboat and the dinghy, which is connected by a rope inthe stern. Today this is all done by hand and can lead to problems when it comes tostressful situations such as harbors and narrow passages.A company called Sailsafe came up with the idea and the construction, which they alsohave tested. I found them through an acquaintance at Dacat AB where I did an internshipin the fall of 2010.Using sketching as the primary tool I?ve worked in an almost-real design project with theaim to develop my skills and give the company a relevant design suggestion. Dacat thenhelped me with a 3d model in Alias, which was printed in 3d and painted in thepaintworkshop at school..

Den här uppsatsen handlar om rörelsen intelligent design, som tror att en intelligent skapare ligger bakom stegen i evolutionen. På så vis blir inte evolutionen en slumpmässig sak, utan en sedermera intelligent designad evolution. Den här intelligenta skaparen är med andra ord Gud. Uppsatsens ämnar  undersöka intelligent design och gymnasieskolan, närmare bestämt hur ID korrelerar med didaktik. Rent konkret är syftet med uppsatsen att se hur man i de centrala didaktiska frågeställningarna bemöter intelligent design i religionsläroböcker på gymnasial nivå.

The purpose of this report is to examine what will happen with the financial control of a company if changes from a family owned company to a public company listed on a stock market. The expectations were that the control would have a more short-term focus with more financial measures. The result shows that the changes were experienced as minor. The rate and the work in the finance department showed to be the major changes due to the change of owners..