External Thoughts is a studio based project with its purpose to throughworkshops establish contacts and create a dialouge about the content of contemporarygraphic design. The project also aims to apply a design curaticalmethod where the designer is both client and contractor, client and designer.We also wanted to investigate the design content as open-source and examinethe school versus the Internet?s future role in the design and for thedesigner. The project is a collaboration with Rasmus Östgård Ohlson fromBeckmans..

In this thesis, a computer program that in a simple way can calculate the performance of control loops at the refinery Preemraff Lysekil has been created. The computer program has been adapted to the environment at Preemraff Lysekil. Theories for evaluation has been studied in aspect of reliability and of automatic implementation. The evaluation has been carried out from data collected directly from control loops at the refinery and from simulated control loops with implemented errors. Among the studied methods are Harris index and Stattin´s oscillation index.

Powdery mildew is a serious problem in both field and greenhouse cucumber production and can cause serious infection and radically reduced yields. Today, powdery mildew is the main disease in greenhouse produced cucumber. Disease control should preferably be both efficient and environmentally friendly, which is not easy to achieve at all times. Alternatives to chemical control of powdery mildews are biological control, physical control, non-fungicide control and cultivation of resistant or tolerant varieties. Biological control can be described as the suppression of damaging activities inflicted of a harmful organism by one or more other organisms, which are called antagonists or natural enemies. In Sweden, there are currently no registered biological control products available to control cucumber powdery mildew. The aim of this study was to investigate the effect of two biological control products in order to evaluate their ability to prevent or reduce powdery mildew infection to an acceptable level in greenhouse produced cucumber. In the experiments, different application regimes were also studied.

Mergers and acquisitions are common phenomenon in today´s society in order to increase shareholder value. Two years ago a fusion of Sweden´s two largest companies in the industry of real estate took place and even though three out of four mergers and acquisitions financially fail this certain case turned out highly successful. The aim of this thesis is to examine how the organizational structure and the management control have been designed and characterized the organizational performance and furthermore what are the success factors of the integration. By studying an acquisition and its potential effects on organizational structure and management control parallel to a model that describes the best practice guidelines for managers to successfully deliver value from their acquisitions, it can be shown that an acquisition has direct effects both on the acquirer and the acquired company and thus the new organizational structure. The main results, thus, is that through active leadership, increased specialization, and more decentralized and thus efficient management control a new organization has emerged consisting of the best features of two separate worlds..

In this thesis, input data for energy performance calculations on commercialpremises have been studied. In energy performance calculations, where internal heat gain parameters are unknown, template values that, in a reasonable way represent the activity in the room, are necessary. These values can be used as input data for whole-year calculations, or for calculations on shorter periods of time.The purpose of the Sveby project is to create standardized work practice in energy issues for the construction industry. The work in this thesis is conducted to correlate with the purpose of the Sveby project, with aims of contributing with information and guidelines for the continuing work with commercial premises.In this report, suggestions for template values for internal gains parameters, based on research and calculations in the field are presented. Suggestions on how these can be implemented in a user-friendly way for two energy performance calculation software are also given, VIP Energy and IDA ICE.

This report describes the process of developing a user-friendly and responsive archive website. The website is a Hi-fi prototype and was created for the company JG Communications, to serve as an archive for their customers? style guidelines. To create this website I have used HTML5 and CSS3 to make it responsive for various computer screens. I have also used PHP and some JavaScript to make some of the functions and Adobe Photoshop and Illustrator to make design elements for the prototype.

Purpose: The main purpose of our study is to explain how the disability management in the municipality of Karlskrona can design its balanced scorecard from a theoretical basis. The mission of the balanced scorecard is to improve the management control system. To achieve the main purpose we have to study the problems that exist with the current control system, which then becomes our second purpose.Method: Our study has a qualitative approach. The design of the study is a case study in which one case has been looked at. The empirical data is collected through interviews and documents. We have gathered our theory through scientific articles and literature.Results: The goals set by the board are unclear and hard to define.

To be examined in hospitals can sometimes be perceived aspainful by children. Therefore there is a need for something,which can distract children?s attention from their perceivedpain. During my graduation project, I discovered a designopportunity to work with suspended ceiling systems inexamination rooms, as there is not much to look at whilebeing examined.The result, Twig Ceiling is an interactive nature-inspiredbacklit module with colored LEDs. Twig Ceiling has onelayer of pattern that is visible when the module is not litand the second layer of pattern appears when turning onthe light.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.