The main ambition of this degree project is to illustrate the fundamental problems of today?s electric tariff regulation and the usage of the analyzing tool; The Network Tariff Model. There is a further discussion of potential problems and clear improvements of the 2012 years proposed network tariff regulation. Interviews have been conducted with specific network companies and Energimarknadsinspektionen. The proposed regulation of 2012 is discussed from the government?s proposition.This paper clearly shows that the authority´s work has been conducted in a very unprofessional manner during the period of The Network Tariff Model.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

The purpose of the study was based on scientific literature to describe the quality of life of persons who have undergone a total hip replacement. The method was a descriptive literature review. The results showed that pain was the most obvious change after surgery. Mild pain before surgery was strongly associated with mild pain after surgery. But despite less pain were experienced early, it took 1 year to achieve the full benefits of improved physical function.

Conect AB wants to know how they can use ITIL in their organization. Right now their company is in an expansive phase and needs a more structured way to work. They have been thinking of improving their way of work for several years but haven?t had the time to do so. Now they have realized they need to work more efficiently to able to grow further.

The purpose of this study was to make a survey of a larger company in Sweden to analyze if it complied to the stipulated Systematic Work Environment Management rules in Sweden. The company chosen was Hennes & Mauritz. The key question was to see if the company was examining and judging the risks, developing handling plans and if they were making yearly follow ups so that problems could be attended to. Further, I also wanted to examine if there was lack of competence within different departments as well as give some substantiate proposals on educations in Systematic Work Environment Management. The method used to investigate this was interviews and observations on how the Systematic Work Environment Management was handled in the company.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

Background: One of the healthcare tasks is to inform and support patients. Information and support is very important for the management of the disease in patients with psoriasis. Healthcare often focuses on the medical aspects and can easily forget about the individual behind the disease.Aim: To explore what kind of information and support patients with psoriasis receive and need to manage their skin disease.Method: Quantitative study with descriptive design and qualitative elements by analysis of the questionnaire with open questions. The study included 22 participants.Findings: The majority of participants responded that they had received information about various therapies, medications and generally about psoriasis. The information participants most often responded they needed, was essentially continuous information and updates on treatments and knowledge about psoriasis according to medical science.

Pharmaceuticals are environmental pollutants that are a major threat to aquatic ecosystems and very little is known about their ecological consequences. In this study growth, survival and behaviour (sociability, activity and boldness) of perch fry (Perca fluviatilis) were examined in order to study the possible effects of exposure to a benzodiazepine anxiolytic drug, Oxazepam, during embryonic development. The study tested following hypotheses: (1) perch growth is affected positively by exposure during embryonic development; (2) early perch survival is affected positively by exposure during embryonic development; and (3) boldness and activity increases while sociability decreases in perch fry exposed during embryonic development. Embryos of naturally spawned perch were exposed to water with two different concentrations of Oxazepam. The embryos were exposed during different parts (24-hour periods) of the embryonic development, because embryos may be more vulnerable at certain times during embryonic development and/or because the exposure at different times can produce different effects.

The construction industry is often criticized to be an industry of narrowness and slow of change. The traditional construction process is considered to create gasps of inferior quality, delays and increase of disputes. Meanwhile, productivity is lower compared to other industries and the prices are increasing. In this debate, it has been assumed that the reported figures are monitoring a reflection of reality, but there might be an error in the statistics which suggests that the focus is at the wrong place. A study of the monitoring and the measurements of the results are to consider, instead of spending time and resources on issues and actions The Last Planner System is an executive planning tool which creates a predictable workflow and creating value throughout all the different stages.

The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the harvesting costs, if better estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

Successful forest regeneration is a prerequisite for sustainable forest management. Therefore, it is important to prevent browsing damage on the commercially important tree species Scots pine. In this study I have tested a new alternative way to increase the available amount of forage and increase the use of these resources by especially moose. The method is based on a slash treatment at harvest, where the accessibility of slash as forage is increased during final felling or commercial thinning by gathering the slash and putting the Scots pine slash on top of the slash piles. This study has compared the availability of forage, the amount of browsed biomass and the number of fecal pellet groups between conventional and slash treated stands after final felling and commercial thinning in southern Sweden.

Today's unsustainable resource use is influenced by many factors. One key factor isproduction methods and patterns. Trough change of production patterns enterprises can bepart of the solution to a more sustainable society. This case study has analyzed environmentalperformance of the printer company Edita Västra Aros Ltd (EVA), who has gained awards forits environmental work, and what driving forces they have had during this work. The survey isbased on a qualitative method and the collected data consists of documents and staffinterviews, which have been analyzed with content analysis.

In an ever more competitive environment Sandvik Materials Technology,SMT, runs a large-scale program to improve their processes for product development.The purpose with the program is to increase the company?s profitability by increasingthe number of new products in their product portfolio. The strategies SMT is usingfor reaching their goals are to change the way they work with product development byreducing lead time and learning how to prioritize products with the highestprofitability. In the R & D Department the work of improvement pursue by adaptingLean R & D to their way of working. Lean R & D encourages working withContinuous improvements and eliminating waste.The main purpose for this Master?s Thesis is to develop didactic support to make iteasier to implement Lean in SMT R & D department.

This report is about how HDR (HighDynamicRange) can be created and used in combination with Tone mapping. This work has been carried out together with Kapsch TrafficCom AB in Jönköping.The objective of this project is to:Evaluate and investigate the effects given to pictures by HDR and tone mapping.Evaluate if the technology may lead to improvements in Kapsch?s systems.To construct a program which is able to handle some form of tone mapping or HDR-algorithm.These questions will be answered in this report:What kind of effects has HDR and tone mapping-algorithms on pictures?Can the HDR-technology give better data in Kapsch?s systems?The research method used in this report is called action research. This means the authors has investigated the technology by reading different documentations and by testing different algorithms to see what kind of result they give. The report describes some of the tests made to see if the technology is appropriate in Kapsch?s system.There is two smaller reports made by the authors which documenting some of the work.The first report describes the work with different settings for a camera to create pictures with HDR-quality.