The purpose of this assignment at SSAB Tunnplåt in Borlänge was mainly to investigate and describe the circumstances for the spare parts stored in storage facilities within the area of operation. Even new facilities which could serve as storage rooms and their opportunities for storing spare parts were an important part of the investigation. This because of the need for improved storing of spare parts. Furthermore, market offers where reviewed for storage of spare parts in more tailored designs. The work will culminate in proposals for improvement which is of importance for the development surrounding the storage and handling of spare parts.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

The aim of this study was to compare perceived disability in daily activities, anxiety and depression for patients with chronic pain (>3 month), before and after rehabilitation. Another aim was to examine if there were any correlations between disability in daily activities and the extent of anxiety and depression before and after rehabilitation.For the measurements, Disability Rating Index (DRI) that measures disability in daily activities, and Hospital Anxiety and Depression Scale (HADS) ) which measures the extent of anxiety and depression were used. The study was carried out with 50 patients who had suffered from chronic pain and with the objective to return to work after rehabilitation. Of these, 90 % were female. The measurements were carried out at three measure points; before rehabilitation, seven weeks after rehabilitation and one year after rehabilitation.The main result did not show any statistically significant improvement in ability to perform daily activities.The only significant difference that emerged was an improvement in anxiety seven weeks after rehabilitation compared with before.

Enligt WHO (2012) ska förlossningsvård innebära att kvinnan ska kunna föda sitt barn på ett säkert och tryggt sätt. Hon ska kunna känna att hon får en säker vård och bli omhändertagen. För att den födande kvinnan ska få en positiv förlossningsupplevelse har kontinuerligt stöd visat sig vara av ytterska vikt. Syftet med denna tvärsnittsstudie var att undersöka kvinnors upplevelser av förlossningsvården i Göteborg och se om det fanns några skillnader i förlossningsvården på Sahlgrenska Universitetssjukhuset/Östra och Sahlgrenska Universitetssjukhuset Mölndal. Mätinstrumentet KUPP (Kvalitet Ur Patientens Perspektiv) som modifierats för att passa förlossningssjukvården användes.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

The purpose of this thesis is to make a comparative literary study of ten laboratory experiments with different kind of sources for query expansion terms. The experiments are grouped according to categories of term sources, which are: search results, collection dependent knowledge structures, collection independent knowledge structures and one that combines the two last mentioned sources into one. To enable a comparison all other variables were held as constant as possible. There is the improvement measured in mean average precision, which is used to measure the various sources potential. The result from the study shows a strong connection between the kind of source for the expansion term and improvement of the result.

The purpose of this thesis is to describe how principals apprehend the school library. In order to respond to this I formulated three questions: How was the improvement of the school libraries carried out in one municipality? Is the school library experienced as a part of the schools organization? How is the use of the school´s library experienced? To be able to answer these questions, for the purpose of this thesis, I have studied relevant literature on school libraries, the school organization and literature on qualitative methods. I have made six qualitative interviews. The objects of the interviews were three librarians and three principals.

Objectives: The purpose of the study was to examine if a pre- and post-operative difference could be seen in self-reported pain disability and self-efficacy among patients undergoing surgery as treatment for spinal disc herniation in order to improve process of rehabilitation.Method: A quantitative and descriptive design was used. 10 patients awaiting surgical treatment for spinal disc herniation were included at Akademiska sjukhuset (The Academic Hospital) in Uppsala. Participation was voluntary and the selection was made by convenience. Data was collected using The Pain Disability Index and Self-Efficacy Scale by which the patient would estimate how hindered they felt because of their pain in everyday activities and their self-efficacy to perform everyday activities. This was done the day before surgery and two weeks after surgery.

The purpose of this paper is to examine information sharing in a hospital organization that is undergoing reorganization. The aiming is to make all employees at all levels actively involved in business development in order to create a smooth and, from a patient?s perspective, adequate emergency care. The paper suggests that the theory of social capital can explain the complexity of what motivate and what promote individuals to share information. The method used in the paper is the case study, focusing on detecting, interpreting and gaining insight on how information shares in an emergency department.

Through a thorough analysis of the current situation, we have highlighted differences inworking methods for the various workshops and drew up proposals for improvements incombination with a practical work description that can be implemented in the company..

This paper examines and analyzes effects of the introduction of a new management control system tool within a Swedish public health organization, the Södra Älvsborg hospital, and its possible effect on organizational change. The new management control system tool, known as the SÄS-model, has been widely criticized for being too costly and with too small positive effects to be shown. Our approach has with that as a background been to examine whether the implementation of the SÄS-model and its balanced scorecard has been able to result in effects regarding organizational change. We have through a case study aimed to analyze how a management control system, much alike one that is typically used within foremost private organizations, can promote organizational change. Our results suggest that the implementation of the SÄS-model and the balanced scorecard has given the organization clearer visions and goals.