AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

Sahlgrenska Academy at University of GothenburgDepartment of Internal Medicine and Clinical NutritionABSTRACTTitle: The connection between IBS and FODMAPsAuthor: Helena Hautamäki and Rebecka BertilssonSupervisor: Sofia KlingbergExaminer: Frode SlindeProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 2013-04-10Background: IBS (Irritable Bowel Syndrome) is a functional gastrointestinal disorder, and is acommon disorder in the western population. The predominant symptoms are diarrhoea,abdominal pain, bloating, constipation, and excessive flatus. Today there are no evidence basedrecommendations concerning dietary factors for patients diagnosed with IBS, but recently certainfactors in the diet that seems to trigger the symptoms have been identified. These factors areshort-chain carbohydrates, Fermentable Oligosaccharides, Disaccharides, Monosaccharides, andPolyols (FODMAPS), which are not completely absorbed in the lumen.Objective: The purpose of this systematic review article is to examine whether there are anyevidence that a diet low in FODMAPs may induce improvement of symptoms in patientsdiagnosed with IBS.Search strategy: The literature search was performed in the databases PubMed, Scopus,Summon and Google Scholar. The keywords were ?Irritable bowel syndrome + FODMAPs?,?Irritable bowel syndrome + diet? and ?FODMAP and diet?.Selection criteria: The inclusion criteria were patients diagnosed with IBS between the ages 18and 69.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

The aim of this work is to take the first step into a development process, with the intention to find a way of making prehistoric soil fertility a variable in archaeological landscape analysis. A pilot study is performed on the Mälar basin area, where four topographical and geological factors are reclassified and then combined, resulting in a map which expresses a relative indication of agriculture potential. The map is then compared to the distribution of Migration Period graves and gold finds. This, however, does not mean that the technique is tied to a certain prehistoric period. Because the work is intrinsically experimental, the technique as a whole is finally discussed and evaluated, and suggestions of improvements and further studies are made..

GCM is a product information management system which handles data for consumer packaged goods. GCM was developed during the middle of the nineties and was acquired by Prevas AB in 2004. The GCM application relies on the services provided by the organization GS1, which supplies global specifications and validations for trade items across several sectors. GCM is updated regularly due to the frequent changes in specifications from GS1. However, the overall graphical user interface design has not been redesigned during these years.This dissertation studies possible improvements for the webpage that handles product data in GCM.

Municipal safety work is an issue frequently discussed. The new legislation about accident prevention obeys the Swedish municipality to present an action program for accident prevention. In Borlänge municipality there has been no sanctioned proposal for a program. This report presents the problems found and gives proposals for improvements in the future safety work. The guiding words should be unambiguousness, able to control and not too complicated.

Problem: How is Lean, a production-focused model being applied to non-productive focused industries.Purpose: To examine how Lean has been applied to the department of Turbuhaler-Kvalitetskontroll and which parts have been successfully applied.Problem statement: How does the implementation of Lean?s basic concept, which originated in the car industry, differentiate itself from the implementation of Lean in the pharmaceutical industry, in this case the department of Turbuhaler-Kvalitetskontroll at AstraZeneca.Conclusions: The department has had success in its implementation of lean. They have developed and modified the basic concept in order to apply it and excluded the parts they did not consider necessary. Through their work they have accomplished numerous improvements in, among other things, the reduction of lead time. .

Syftet med arbetet är att kartlägga och att finna möjligheter till förbättringar i projektflödet. Arbetet berör de delar av företaget som befinner sig i ett tidigt skede av projektflödet eftersom ändringar i dessa skeden kan göras till en liten kostnad. Informationsinsamling har skett genom fria samtal, dock med vissa förberedda frågor. Information har inhämtats från flera delar av projektflödet så som försäljning, projektledning och konstruktion. Vi har kommit fram till att det är värt att lägga mer resurser på förbättringsarbete och se över ansvarsfördelningen för detta.

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.

AimThe aim of the present study was to evaluate physical performance according to ?fysprofilen? in skiers of the Swedish mogul ski team and to compare their physical performance at three test occasions during one year.MethodsAll eight elite mogul skiers at the Swedish national mogul ski team during the seasons 2011/2012 and 2012/2013 participated voluntarily in this study. The test battery ?fysprofilen? was performed at three test occasions, October 2011, May 2012 and October 2012. Muscle strength was evaluated with squats, bench press and grip strength; power was evaluated with power clean, squat jump, countermovement jump with and without arm swing, Harre´s test and the 30 meters sprint.