AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This quantitative study explores how employee perceived efficiency within customer service is affected by standardized routines, digital tools, and motivational factors. The study is based on survey data collected from 42 employees across five customer service departments in a larger organization. The theoretical foundation integrates Weber?s bureaucracy theory, the Technology Acceptance Model (TAM), and the Job Characteristics Model (JCM), allowing for a multidimensional analysis to capture the employees' experiences of efficiency. Findings reveal a statistically significant positive relationship between perceived efficiency and both standardized routines and perceived digital tool usefulness and ease of use. Furthermore, the study identifies that skill variety and task significance are positively correlated with experienced meaningfulness, which indicates a potential mediating relationship between these motivational aspects and perceived efficiency.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

There is an old saying, that after Epaminondas nothing was ever the same again. In this thesis I will focus on three questions: "Epaminondas the man." Who was he? "Epaminondas the general." How did he change the technique of warfare that made it possible to beat the Spartans? "Epaminondas, founder of cities and wall-builder." How did he build the walls around the cities he initiated, that made them resist enemy attacks for many years to come?While seeking the answers to yhese questions I will make a contextual analysis to get the historical background to all the phenomina involved..

Problem The culture sector is characterized by qualitative goals which raise questions such as how do you measure culture and what is ?good? culture? Both the goals and the measurements tend to result in subjective judgments, which according to the theory make result control inefficient. Yet, result control is frequently used in the culture sector; which leads up to our research question: What characterizes the problems of result control in the culture sector?Purpose The aim of this study is to make a survey of how the Gothenburg Opera works with result control and follow-up. By defining how it tackles the different problems, which could arise with result control in a non-profit organisation, we aim to map how the problems regarding result control are characterized in the Gothenburg Opera.

This essay aims to examine managers experiences of control at the workplace within the property sector, and how these experiences differ between female and male managers. This study is a qualitative single case study that intends to offer a deeper understanding of a unique case and uses an abductive method approach. The essay is based on two main theories, Foucault?s (2003) theory of control and the gender system of Hirdman (1988, 2001) and is supplemented by previous studies of the modern workplace. The study is based on eighteen semi-structured interviews that aims to capture the participants personal experiences regarding control at the modern workplace, and the norms, surveillance, hierarchies, and self-discipline that make up this control.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This thesis intends to analyse conditions for a successful implementation of consociational democracy, as a democratic model in Afghanistan. The lack of critical reviews regarding the democratisation-process in Afghanistan initiated the purpose of this study.Lijpharts democracy model was used as the basis in the comparative study. Along with empirical evidence regarding how the complex process of democracy in Afghanistan is progressing, the study investigated whether the identified conditions occurred or not.The choice of which democracy model to use can be crucial for the democratic possibilities to even survive and become established in conflict-affected communities. The principle of consociational democracy is that it is an empirically based normative model that aims to organise the state in a way that works against the risks of majority domination and oppression against the minority.The empirical case study revealed that a majority of the conditions were not met, which then can counteract the possibilities for consociational democracy in Afghanistan. The study has critically examined the prospects for the success of consociational democracy in Afghanistan, and it can be assessed that there is a limited probability for a successful applying of this model..

In the 1940s the Swedish town planning was inspired by the English city development with the concepts of neighbourhood and community planning. In order to promote democratic development and solidarity the ideal would be to create community centers with full service. Community centers are part of the building of the suburbs during the postwar period. The buildings in Sweden from 1940 - and -50s were built with the intentions to be good homes for all regardless of income, class and status. Collective solutions to individual problems were characteristic of the Swedish policy during this time.

From 1710 to 1713 the plague raged through the Swedish province of Scania. Other studies have been made on how the disease affected the society during the epidemic. This study tries to focus on the recovery afterwards. How did the population and the farmsteads recover after the plague? Statistics from parish registers and cameral records show interesting patterns in the demography, and that the recovery was far from complete 1720.

Management by contract is nowadays a common method within the public sector since the NPM overtook as paradigm with its mechanisms of control inspired by the private sector. The public agency is foremost a service provider where they interact with citizens in the service process. Swedish eldercare has significantly increased its expose to competition which means that eldercare can be executed not only by the municipalities own provider. Such an adaption increases the requirements to inspect quality and how the purchasers assure goal achievement by control. The outmost liability stays with the municipality to ensure that the service produces god care since their position as the service purchaser implies the responsibility to plan, precise and evaluate the required work that the executor has to accomplish.

This thesis work is the last part of the Master of Science education inmechanical engineering at KTH, Stockholm.The aim of this project was the development of a Multi-zone modelfor NOxformation in Diesel engines. Because of the stringent emissionlegislations, great effort is made to decrease the fuel consumption and theharmful emissions of internal combustion engines. Computer simulationsplay a decisive role in this context because they substitute the expensiveand time-consuming laboratory tests.The model is based on a multi-zone approach and uses the wellknownExtended Zeldovich Mechanism which gives a relation to calculatethe NO formation rate using the concentration of different gas speciesinvolved in the process.All the most important phenomena involved in the Diesel combustionhave been modelled. A special attention is then paid to the equilibriumconcentration calculation; this is a significant part of the model whichstrongly influences the following steps.A Simulink model has also been developed. This second version isbased on the previous model and it is made especially to allow theconnection with other external softwares, GT-power in this case.

THE CONSTANT IMPROVAL AND REFINEMENT OF THE MOBILE TECHNOLOGY HAVE MADE IT POSSIBLEto use video in settings where such use couldn't be motivated before, due to economicaland practical reasons. The purpose of the study was to identify and explore possiblechallenges in interorganizational use of video during emergency response work. Thiswas done by a case study of a system designed for the use of video in such situations.The study focused on operational challenges for the fire and rescue services and thehealthcare organisations, where the main challenges identified were intended to beanalysed and discussed in terms of design. The empirical results were gathered throughqualitative interviews with representatives from the fire and rescue services and thehealthcare organisations in Göteborg. This material made it clear that contextual aspectsof emergency response work lead to a couple of challenges connected to the use of videoin such situations.