To succeed, and make money at your animal production you need to feed your animals with high quality fodder. Other condition to succeed is that you keep your production costs at a minimum. To be able to produce baled silage at a low cost it?s very important that the bales have a high density. Density is measured in kg dry matter (DM) per cubic meter. The purpose with this report was to learn more about making silage in round bales and to how much the bale density varies between different brands of round balers.

SUMMARYThere was no previous study in what high level dressage riders had for ideas of how to best prepare for their training sessions with an instructor. Neither any study of how high level dressage riders seemed to be more or less susceptible to the instructions from their instructor during their training sessions. If the sport had more knowledge about this, it might result in more riders on a higher level. The purpose of this study was to find out how high level dressage riders are preparing themselves for the best result for an instructor led training session and how they could bring as much as possible instructions from the coach. The two questions of the study were: How are high level dressage riders preparing themselves for a training session with an instructor, practically and mentally, and how can they affect their susceptibility to instructions?The study was carried out both by reviewing existing literature and studies in general education and pedagogy in the riding education, and by a qualitative interview study of six dressage riders who rode on a difficult level at the competitions, during the year of 2009.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

Aim: To evaluate nurse student?s apprehension of an interprofessional seminar as part of training. Method: A descriptive, qualitative study built on the analysis of 43 questionnaires and one group interview with nurse student?s who participated in the seminar. For the analysis of the collected material we used the method of analysis of contents as described by Graneheim and Lundman.

Ask any constructional worker and there is a high probability that this person knows a colleague with pain or other disorders caused by working with power tools.According to the Swedish Work Environment Authority 71 percent of the Swedish constructional workers is exposed to vibrations at least 25 percent of the working hours. Despite this, the number of reported occupational sicknesses caused by vibrations is as low as 1, 4 percent.JM Ltd. is one of the largest constructional companies in Sweden. Their main business is new housing and development of residential areas. God quality and low impact on the environment is a part of great importance in the company?s long-term goals.

The aim of this study was to investigate how four middle school teachers use and process the contents in read-aloud books, to stimulate the pupils interest in reading and increase reading comprehension. A qualitative approach was used to collect data, through interviews and observations. The findings show that all of the teachers work with read-aloud books regularly. The teachers state that read-aloud books have a positive effect on pupils language, vocabulary, reading comprehension, imagination and ability to reflect. The teachers have three distinctive purposes with read aloud-books, a moment of relaxation, create an interest in books and increase the pupils reading comprehension.

ABSTRACTIntroduction: Scientists have over the last centuries realized that presurgical reduction of bacterial skin flora decreases the surgical site infections. Sponges, showers and washing with Chlorhexidine is today a standard procedure. Purpose: The purpose of the study was to describe the patient?s experience of the information given to them about the preoperative showers with hibiscrub. Method: Semi-structured interviews were used to collect the data, and content analysis was used to analys the data.

During my practice as a teacher trainee at an upper secondary school it became clear to me that many pupils had difficulties with mathematics. I was surprised to find that many pupils seemed to get stuck on the level of attainment for the senior level of the nine-year compulsory school. As I have not studied anything about difficulties in Mathematics during my training to become a qualified teacher, I would like to get to know more about this.After studying research done on this subject I made the following approach to the problem:? What fields regarding Mathematics do the pupils themselves find most difficult?? What factors have been contributory causes to these problems?? What are the factors that have helped pupils with difficulties in Mathematics to reach the goals for the syllabuses in Mathematics?The answers to my questionnaire and interviews resulted in the following conclusions:? Pupils find theory of equation and conversion of units as most difficult at senior level of the nine-year compulsory school.? Teaching should be done in special instruction groups to give the pupil the opportunity to develop his/her skills on an individual level.? Pupils find it hard to deal with all moments in Mathematics during the time given for each course.? The pace for teaching Mathematics is too high according to the pupils.? Pupils wish for instructions on a lower level.? There is often a lack of contact between teacher and pupil.? The teacher should use more time to help the pupil receive good self-confidence and increase the motivation for instructions in Mathematics..

This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

In the collections of the Vasa Museum, 100 leather objects have exhibited salt precipitations. The objects, that have previously been impregnated with PEG, have become deteriorated and fragmented due to the precipitations. During a previously conducted study it was established that the precipitations consisted of iron and sulphur. However, it was not established whether they occurred in the leather?s inner structure and no treatment plan was developed.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

The purpose of these studies is to see how the reception and education of non-Swedish speaking newcomers are organized in a small county, and what you can do to improve this process to achieve a better and quicker integration into the Swedish language and society. To do this, interviews have been performed with four headmasters and different categories of teachers representing all schools in the actual county.In the result it was clear that both headmasters as teachers saw a need to change   and improve reception to provide consistent but flexible support. The headmasters wanted to create written instructions to assure equivalence between the different schools. The majority of teachers wanted to change the current system whereby some pupils, based on their origins, were placed in a preparatory class to learn the language whilst others were placed directly into a Swedish class. All teachers also thought that the help the non-Swedish speaking newcomers were offered was insufficient.The conclusion is that the county must decide and create instructions according to Skolverket?s recommendations and it also ought to offer all pupils the possibility of learning the basis of the language in a preparatory class.

Construction projects are generally designed as a general contract or a complete contract. In a general contract the commercial contract that is being used is AB 04 and related advice and instructions, AMA AF 07. In AB 04 there is an insurance requirement that stipulates that the contractor shall take all risks and liability insurance for the contract where the client must be co-insured.Construction law is almost exclusively regulated by the various standard contracts, one of those is AB 04. The Construction Contracts Committe is an organization that has published the standard contracts in this area of law and also the advice and instructions to help the parties to understand the agreements. The insurance requirement occurs in an area of law that is complex and the meaning of the concept is not entirely clear, nor which of the parties? interests and responsibilities that are covered by the types of insurances that are provided by the insurance requirement.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.