This research paper is a thesaurus construction for the interdisciplinary subject of landscape planning. The personnel doing the indexing of documents at the Swedish University of Agricultural Sciences had earlier expressed a need for such a work within the fields of Landscape Architecture and Landscape Engineering. However our objective was not to create a complete thesaurus, but instead a basic construction which the personnel at the Agricultural University could expand upon. The actual construction is based upon ISO 2788-1986, Documentation Ð Guidelines for the establishment and development of monolingual thesauri, and Aitchison, Gilchrist and BawdenÕs Thesaurus Construction (1997). The line of enquiry taken has dealt with the problems relating to the collection, selection and control of indexing terms.

This report is the result of a project work carried out at Karlstad University in conjunctionwith the local consulting firm Camatec where most of the work has been performed.The work can be classified as a classic engineering work with supportive theories andcalculations which in this context is relevant.The engineering project has focused on developing new standards for a conveyor that is usedin the Värmland paper industry where large rolls of paper are produced. A conveyor can takeits appearance in many different forms but in this thesis it has been an exemplary look and ithas also become modulatable with a central section, a drive end and a turning end.The Construction work has been build under CAD programs such as Pro Engineer, drawingshave been created and costings have been analyzed. Strength calculations have been made andcooperation from several different companies have erected to explore different solutions andideas for a modern and sustainable conveyor..

The construction industry stands as one of the industries in Sweden where most employees tend to encounter accidents. At the same time, the Swedish authority of work environment estimates that there are large numbers of hidden statistics with accidents and incidents that never gets reported. To prevent accidents, the Swedish authority of work environment has decided that every company have to, beside report every accident and major incident to the authority of work environment, keep statistics and evaluate every incident that happens at their places of work.The people responsible for work environment at the Swedish building contractor Peab, believe that it is only a fraction of all incidents happening at their construction sites that actually gets reported. The purpose of this study is to investigate the reason why employees of Peab do not report incidents. By an inquiry and interviews with both craftsmen and office holders at Peab Bygg Öst 1, the employees? attitudes and knowledge have been studied and evaluated.The study shows that the craftsmen´s knowledge of incidents is relatively low.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

The construction industry is currently receiving much criticism for inefficiency and slow development while demands for reduced built in moisture and efficiency increases. This report examines whether the use of field factories can meet these requirements and what factors that will be critical for future use of field factories. Industrialized construction with field factory is compared with traditional loose timber construction and industrial construction in the fields of execution, logistics and working environment. The aim of this report is to provide a basis for field factories current and future use and development. To achieve the aim of the report, people with experience in the use of the various methods was interviewed and literature studies in the various fields done.

This study provides a Construction-Grammar analysis of Swedish pseudo-coordination construction with the verbs gå "go" and ta "take" on the basis of an examination of empirical data. Factors bringing about different readings of gå and ta pseudocoordinations are discussed, showing that the readings correlate with certain semantic properties of the first and the second conjunct. Three distinct pseudocoordinations with gå are proposed, differing as to their readings: inceptive, surprising and imperfective. The single ta pseudocoordination is claimed to have both inceptive and intentional readings. It is illustrated that the readings of gå and ta pseudocoordinations are affected not only by inherent lexical properties of single conjuncts but also by their interaction with construction-level characteristics.

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

The purpose of this thesis is to examine how the working method partnering has been welcomed in the Swedish construction company NCC and find possible explanations to this. The theoretical background used to understand and discuss our findings mainly builds on value and network dynamics. The empirical study is of a qualitative nature and builds upon 13 semi-structured interviews and the participation in a two-day start up workshop with 21 representatives from involved parties. The study shows that partnering has been positively accepted at NCC. Possible explanations for this can be found in the contrast the method represents to the traditional way of working within the construction industry.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

The aim of this study was to investigate and compare the availability of construction materials affect children's constructions and play. Observations were made when the children were allowed to play and build with very little and much of the material play-doh dough in preschool. The study is aimed at children aged 3 ? 5 years. Interviews were also conducted with educators in departments where the children spent time to give support to this study.The result shows that the children create as many designs of any material amount.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

In a condominium with two-apartment buildings, lies an area, formerly used as a playground, nowadays wasted and abandoned. The owner wanted to embellish the place and get a new use for it, preferably as a gathering- and feast-place. The work is described with focus on the construction with describing pictures and sketches. The production of the sketches is not reported more than that they are attached at the end of the paper. The practical work is done and documented.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

The mistakes and failures on the roof are noticed during inspection of the construction, many of the commentaries are recurring. A contractor should only need to get a commentary once and then learn from the mistake. It has in this study been brought to light that the solution is not to tell the contractors to "stop slattern", it is more complicated than that. Today, the biggest problems are found in leadership, communication, feedback of experience and that the entrepreneurs take too little responsibility.To minimize the amount of commentaries all contractors need to work with a clearer leadership where the leader is both respected and appreciated. The leader must in an effective way be able to convey all the information to all employees.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..