Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

The foremost objective of business organizations is to generate value for shareholders and to opt for strategies which optimize it. Hence it is of key concern for business leaders to appreciate how operations best are run to maximize value creation. This study explores how financial theory can reveal the link between one particular business strategy and the corresponding effect on shareholder wealth. The question in focus is whether construction companies can enhance their value creation by implementing shift-work to increase the weekly production rate. The thesis particularly targets apartment block projects in Sweden and has the construction company Peab AB as primary object of study.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

Texo Application has created robots that they call for satellites; with these you can feed in storage pallets into a satellite storage. Satellite storages consist of channels in height (e.g.3 to 8 pieces) and width (e.g.3 to 100 pieces). Channels can be different long (e.g. 5 to 200 pallets). At deposit of a storage pallet the truck insert the satellite in a channel and then the pallet, the pallet is driven into the channel until it reaches another pallet or the other end.

Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..

Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

Hur musiken fungerar i spelet Mirrrors Edge..

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

In today?s society we depend on technology to perform the simplest tasks. Whether we are engaging in conversation with a friend or are navigating in traffic, we are likely to be found with some technological device in our hands. This dependence has grown over a period of time, and many of us have failed to reflect on the impact technology has had on our lives. The emergence of so-called One-to-One projects, where teachers and students gain access to a personal laptop, does however provide an excellent opportunity to do so.

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it.

Sammanfattning Energieffektivisering av tre flerbostadshus från 50-talet Detta arbete redovisar vilka åtgärder som är lönsamma ur ekonomisk synvinkel och kan leda till minskad energianvändning hos flerbostadshusen på Ystadsgatan 12-18 i Helsingborg. Eftersom dessa flerbostadshus är uppförda under 1950-talet och kan anses vara typexempel för flerbostadshus byggda under detta decennium kan detta arbete ge inspiration åt andra bostadsrättsföreningar och hyresrättsägare som också funderar på att göra besparingsåtgärder i sina 50-tals hus. Huvudtanken med arbetet har varit att få ner den specifika energianvändningen och inte ändra de boendes beteende vad gäller individuell hushållsel. Att minska den specifika energianvändningen innebär att åtgärder måste göras inom följande område: styr och reglerteknik, installationsteknik och byggnadsteknik. Våra åtgärdsförslag är tilläggsisolering av vindsbjälklaget och vindsvåningarna, samt installation av ett solvärmesystem.