In Sweden there is no legal regulation for the obligations and responsibilities between the contracting parties within the construction, civil engineering and installation sector. To clarify uncertainties regarding the liability, actors from theses sectors have agreed upon a voluntary regulation, called the General Conditions of Contract.When insurance companies want to enter the Swedish construction insurance market, they face a regulatory framework that not only regulates the construction market, it also imposes requirements on terms and conditions that must be included in the construction insurance. These terms are perceived as ambiguities and create difficulties and inhibit the ability for these insurance companies to offer competitive insurances. One of the terms that create these difficulties is the guarantee period, which is period of time starting from handing over the construction project to the employer, during this period the contractor still has the responsibility for the construction project. The guarantee period regulated by the General Condition of Contracts differs from the international use of the term both in length and in content.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

This study includes several purposes which are to describe the concept of working environment, explain who is responsible for its functioning and how the working environment should look like. Other purposes the study have is to investigate how the working environment is in both Swedish and the two investigated companies construction sites and to share some operators proposing measures for the shortcomings and problems that exist in the construction sector working environment. To achieve these purposes was a qualitative study made with unstructured observations, interviews and survey where three construction sites were observed. The result shows that the concept of the working environment cover many aspects and is essentially about the environment we live in and experience in our work and this environment can be both an indoor as an outdoor environment. In this work, the concept is divided into four areas; it is the physical, the ergonomic, the psychosocial and the chemical.

In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..

During our formative years, technology has always had a natural part of everyday life, and for us technology has never been particularly gendered. If this depends on the climate and the attitude of our homes, ourselves, the combination of both or something completely different is a question we have asked ourselves at times. But our approach to technology does not seem as obvious to all women, and today the IT industry is heavily dominated by men. This has meant that we have asked the question whether there is any underlying reason why so few women opt for IT courses? Is there a link between how different IT organizations profiles and the prevailing gender ratio? The purpose of this study is to investigate whether there is any connections between how IT organizations are related to gender issues and how the structures, attitudes and gender actually looks like in the IT industry today, and how this can be seen in their branding efforts.

The construction industry depends on functioning logistics; if the logistics isn?tworking the construction site will risk to be interrupted due to material shortages orproblems with deliveries. Despite this, the construction industry is battling logisticproblems daily. This problem is very time consuming and costly for the companies.These theses are written for Peab Bostadsproduktion and investigate if it is possibleto focus on logistics earlier in the building planning process to reduce the problemsthat occur. Peab has partnerships with three companies that could be helpful for themin the work of reducing logistic problems.

Styr is a computer program that the construction company NCC use in their construction projects. The program is used to keep the economy of their projects in a good order and things for the best in an early phase. The problem is a low extent of utilization. During the latest decade NCC has put a lot of job and money trying to develop the program. The question is how to get the employees to use the program in a greater extent.

The aim of the study was to install a biogas system consisting of three tubular polyethylene biogas digesters at a rural household in Malawi and to evaluate the constructed biogas system with regards to relevant system parameters. The purpose was to evaluate if the technology is a possible solution to reduce deforestation and support Malawi in climate change mitigation and adaptation. The study was carried out in the southern part of Malawi in cooperation with the University of Malawi. Locally available materials were used to construct and install the system. Three different feed materials, cow, goat and a mix of cow and goat manure, were used in order to determine which one was best suited to utilise as a digester substrate. After the installation, measurements of temperature, pH, biogas production, biogas composition and system functionality were made. The results of the study show that a biogas system with tubular polyethylene biogas digesters can be successfully installed at a rural household and that the most suitable feed material is a mix of cow and goat manure.

This study examinates technology's traumatic impact on the male subject in The Atrocity Exhibition by J.G. Ballard. In my analysis I show how the protagonist uses a fetischistic strategy in order to make sense of the trauma that technology embeds. Paradoxically it proves to be the agent of his trauma, but also functions as his shield. The machine is thus in a position of the hinge, the point in a structural system that both enables and deconstruct the system.

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

This bachelor thesis addresses the problem of appeals against house building in Gothenburg. The thesis investigates whether there is a statistically significant relationship between demographic factors and the occurrence of approved, appealed and revoked permits for new construction of residential buildings in the ten districts of Gothenburg. This is done with a correlation analysis. The report also investigates whether there is a statistically significant regression in the same demographic factors and how these individually affect the average processing time for appeals in the districts. This study is done with a multiple regression analysis.

This report compares two different types of insulation with regards to fire and moisture. The materials were tested for the company Fiskarhedenvillan AB, for a wall and a roof construction that the company currently uses in the establishment of Sweden's first certified passive house for international standards.Their current material, Rockwool, is compared to a relatively new material on the Swedish market called SEALECTION Agribalance sold by the company ISO Green AB. The material is a type of polyurethane insulation. This insulation material would result in a more efficient execution of the construction as it provides waterproofing and is applied more easily than Rockwool. From a fire standpoint, literature studies and discussions with fire experts led to results.

This study has been conducted on behalf of Vectura Consulting AB with the purpose to examine how different actors perceive the dimensions of sustainability and sustainable construction. The purpose is also to provide an understanding of existing barriers and opportunities for sustainable construction within the industry and exemplify with different directions for the actors in order to develop sustainability. The study has approach the research problem by using systems theory, developed by Checkland, to identify the relevant system. Other systems theories has been used as an theoretical framework in order to identify barriers and opportunities, which in this study are based on Hughes?s theory about reverse salients and salients.