The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The purpose of this report was to identify the current waste management of non-hazardous construction and demolition waste in a few Swedish construction companies, based on the different steps in the waste hierarchy with a focus on waste prevention, reuse and recycle. Additionally, the purpose was to attempt identifying opportunities, obstacles and as well as to propose possible solutions from an environmental perspective. The method used was a qualitative study using interviews conducted through emails and phone with employees occupying positions that could answer this reports questions. The results of this report indicates that waste management of construction and demolition waste has improved, and less waste goes into landfills. The concern is that the overall amount of waste being produced is not decreasing, thus calling for actions preventing the production of waste.

Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.

The industrialization of construction is increasing in Sweden which leads to higher demands of prefabricated components and cells. But what does the business of construction think of the industrialized business and what can be done in order to decrease faults and errors with these products? Today we have many manufacturers who have different technical solutions which might lead to difficulties when assembling components and cells at the building site. But by trying to make a more opened market, with possibly standardized connections details and improving the communication between the different participants, the prefabricated components and cells can be made and assembled with less errors. This is something that needs to be done in order to establish a more secure business, and especially when working with new companies and methods, when using industrialized products..

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

Most of my 16 students show a negative attitude towards mathematics and have difficulty understanding why they need mathematics to work as cooks. Their lack of knowledge has a negative effect on their work in the kitchen because they cannot master relatively simple mathematical solutions. The purpose of this study is to examine if an integrated working method of the subjects mathematics and cooking can change students? attitude towards mathematics and increase their understanding of the value of it in restaurant work. An integrated working method means to integrate the core subjects with programme specific subjects and that teaching is directed towards the main features of the vocational programme in order to create a holistic view.A theory of action research has been applied in this study, aiming to change something perceived as problematic through combining theory and practice in the cooking subject.

Abstract:Objective: This study aimed at describing the health concept in the Swedish follow up programme for cerebral palsy (CPUP), with main focus on how aspects of participation is expressed in the agenda of the programme. Design: Document analysis: The home-page of CPUP was searched for three types of written material; references to the nature and aim of the programme, protocols used for data collection and abstracts from articles and reports on the list of publications. Within these all expressions of health, with bio-psycho-social understanding of the concept, were extracted and condensed with manifest content analysis. The meaning units obtained were linked to the International Classification of Function, Disability and Health ? Child/Youth (ICF-CY).

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

Sandström Maud & Svahn Katrine (2006). Varför väljer elever till det Estetiska programmet med inriktning bild och dans? Why do students choose the Arts programme with concentration of art and dance? Skolutveckling och ledarskap. Lärarutbildningen, Malmö högskola. Vi arbetar på det Estetiska gymnasieprogrammet med inriktningarna bild och dans och ansvarar för att utbilda elever i bild och dans under tre års tid.

The purpose of this essay is to explore how social media affect the political orientation and commitment of youths. Three scientific questions highlight the purpose from different angles. The didactic perspective is discussed in the initial and closing discussion, and is analyzed in the corresponding chapter. Two methods are involved in the study; one survey and one interview with a focus group. The survey had a total of 98 respondents from four different classes, all in the first grade of upper secondary school.

AbstractHeadline: Young trouble and teenage love (Fjortisgrubbel och tonårskärlek)Number of pages: 37Author: Annika IlmoniTutor: Amelie HössjerCourse: Media and communication CPeriod: Autumn 2007University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/aim: The purpose of the work was to produce a comparing study of two Swedish teenage films from different periods of time, 1970 and 2005. An analysis was to be made of how love between teenagers as well as the heterosexual relationship in general was depicted in each of the films and further investigate the gender construction in both films.Material/method: With the intention of narrowing down the complexity and make the evaluation more lucid 5 scenes from each film were used for comparison, these were chosen through the Anglo Saxon dramaturgy. To make the scenes more comparable 4 factors were used for analysis in each scene, these were: clothes, recreational activities, behaviour and environment. Beside the above given factors the heterosexual relationship were analysed and compared in each of the scenes through the theory of dominance in dialogue.Main results: The gender construction occurs obliviously in the older film from 1970 while taking place in a more conscious way in the film from 2005. Further on the heterosexual relationship is perpetually depicted in the 70?s film with a submissive girl and predominant boy, the same dominance is easily seen in the more recent film but with a higher rate of equality as the girl is portrayed as the dominant character in almost half of all scenes.

There is a lot going on in the construction business right now. It feels like everywhere you turn there is a building sight. Furthermore the business is heading a generation change and the need of recruiting new construction engineers is huge. How is the business going to handle the transition that they are facing? The question has been in progress for at while and I wanted to find out what the current students feel about taking the step into the working life and replace the veterans.A research is made about student?s opinion about their education and future work life.

Syftet med examensarbetet är att hjälpa ett företag med att införa standardlittera för deras prefabricerade betongelement som ingår i deras Konceptet. Införandet av standardlittera ska resultera till att återfinna och gruppera deras betongelement i CAD-systemen. We did our thesis project at one of the most prestigious Swedish construction companies. We have examined the possibilities of doing sandwich elements to standard elements which would increase the degree of industrialization. The company has developed a concept that is based on a more refined process of industrialization.