Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

The importance of chemical use is enormous for areas such as agriculture, industry and medicine and hence a prerequisite for our modern society. In order to protect humans and the environment from the negative effects of chemical use, chemical regulations have been used at a relatively early stage in our history. The purpose of REACH, the new chemical regulation of the European Union, is to generate new knowledge of chemicals within the European market and to increase the responsibilities of the enterprises when it comes to risk management. Whether the enterprises will implement the regulations or not will be of vital importance for the realization of the law?s intentions.The purpose of this study was to identify possibilities and problems that can occur when a downstream-user SME is about to implement REACH.

This essay examine the meaning produced around bodies and body fat in the queer community, but also in the surrounding straight community. The author has interviewed fat activists, and are using queertehory, to examine and analyze the relationship between body fat and the understanding and construction of sexuality and gender. The author concludes that even if norms around body shape and body fat are overlapping between the two contexts to some degree, they also differ. In the straight community, people with larger body shapes and sizes are punished, and encouraged to stay, or become, slim. However, in the queer community, ?fat? or bigger body sizes are not frowned upon in the same degree.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

The purpose of this thesis is to investigate how structural changes are depicted as well as formally brought about in the documents of rule and regulation of Uppsala University and Uppsala University Library the years 1999?2013. Beside the documents of rule and regulation, also documents that is commenting on (or in other ways relates to) these are investigated. The study is based both in organizational theory and modern rhetorical theory. The results show that the University to a certain extent gained an increased possibility to micromanage the library?s working routines during the time span covered and the study traces the consequences this had on the library organization and reactions it evoked among the leaders and representatives of the library staffThis raised a debate between representatives from the University library and its mother organization, the University, regarding at which level in the whole organization decisions regarding the library?s forms of funding and everyday praxis.

The Swedish market for vehicle inspection is re-regulated since June 2010. More than four years after the re-regulation there are eight companies in the market. Two of these companies are a result of the former monopolist's owners divided the business among themselves. The remaining six companies have entered the market through acquisitions or by building up their business from scratch, these are known as new entrants in the study. The competition has developed slowly and the former monopolist still has the highest market share.

Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

In the construction industry the number of female managers is very low, only four percent (SCB, 2010). In fact, women with management positions has risen by six percentage overall, the last seven years (SCB, 2010). If women in managerial positions continue to grow at this rate, the proportion of women managers will be equal to that of male managers in 2033. More women are needed in the maledominated construction industry in particular because it is deemed that they have a different way of thinking and acting (Granér, 1994). Nelton (1991) believes that companies can take advantage of female managers to be more competitive on the market, the reason why is because women can see other possibilities when solving problems. Rapacioli (2010) argues that the recruitment of women into management positions not only benefits the individual itself but also the company. We have used a qualitative study with a deductive approach. Six respondents from the same company were interviewed, two of them have management positions and the other four were underemployed.The research question of this paper is: What differences and similarities are seen between male and female leadership in terms of their characteristics in the construction industry?The purpose of this paper is to examine similarities and differences in leadership in the construction industry where the focus is on the female and male characteristics. To fulfill our purpose we chose a qualitative study. We have interviewed six respondents at one company in the construction industry. Two of the six respondents have management positions and the remaining four are employed. In this paper we have concluded that there are some differences and similarities between men and women´s leadership in terms of their characteristics.

This qualitative research is about how Swedish media constructs immigrants in articles. The focus of the study will lie on ten Swedish articles and how they stereotype immigrants, but the demarcation will be for young immigrant boys related to crimes. The purpose of this paper is to highlight how media achieves its goal to construct a group as inferior. This will be implemented with the help of articles from different newspapers that reported on immigrants who have committed crimes. We have chosen to look at different newspapers to see if there is a curtain pattern in the construction of immigrant boy.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

This examination project has been performed in collaboration with Husqvarna AB, one of the world?s leading manufacturers of both commercial and professional garden products such as chainsaws, trimmers and lawnmowers. Husqvarna AB always strive to develop and improve new and existing products and components to ensure an attractive product and a competitive position on today?s market One of these components is filled balances. This is a component unique to the company and is one of the parts in their fuel-powered chainsaws.

'Hir in the box' is a study about the gender perspective in packaging design and how it is today. The study deals with the product category razors, for both women and men, to examine and compare products with the same function but with different designs. Based on an analysis of how packages are designed for different sexes, information should be given on how gender-neutral packaging can be designed and used in the future to reach the market. The purpose of the study is also to contribute to future research on the subject. To fulfill the purpose of this study, nuanced and in-depth data is collected by means of a small-N-study and a qualitative study in the form of open group interviews where the survey units are reviewed and discussed.