The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Bakgrunden till detta examensarbete är byggföretagens utmaningar med att bedriva byggprojekt där nya och unika objekt skall konstrueras, med många nya förutsättningar och allt som oftast även en ny sammansättning av personalstyrkan. Ett gemensamt behov för dessa byggprojekt är att effektivt kunna hantera en mängd av olika och nya variationer.Oden anläggningsentreprenad AB presenterade ett problem gällande oönskade variationer av produktionstider för betongmonoliter som innefattar mycket repetitiva arbetsmoment. Examensarbetets syfte blev att besvara följande frågor:Vilka är faktorerna som påverkar variationer i produktionstiden vid bygget av betongmonoliter?Vilka är lösningarna till att reducera faktorerna som negativt påverkar produktionstiden?Hur ska de nya lösningarna implementeras?I examensarbetet har teorier kring lean production, lean construction, organisationsförändring och betongkonstruktioner undersökts. Det empiriska materialet har hämtats genom att författaren deltagit i produktionen och fört en fältdagbok över dagliga problem som produktionspersonal påtalat.

Uppsatsen innefattar en intern benchmarking för Volvo Construction Equipment, Arvika, Hallsberg, Eskilstuna och Braås. En kartläggning utifrån intervjuer ska göras över de investeringskalkyleringsmetoder som används i dagsläget. Syftet är att arbeta fram en mall för investeringar inom Operations Sweden, där samtliga involverade använder samma beräkningsmetoder och parametrar i sina bedömningar.Volvo Construction Equipment tillverkar anläggningsmaskiner. De fyra fabrikerna bildar tillsammans gemenskapen Operations Sweden. Inom Operations Sweden tas beslut om ett investeringsprojekt ska genomföras eller ej.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Italy is the third largest market in Europe with a population of almost 58 million. The country is the tenth most important market for Swedish sales. Italy has a fairly good economy at the moment and the forecast tells of an increasing strength during coming years. Despite all of this, Sweden is exporting a fairly small amount of wood to Italy. Only around 2,3 % of all Sweden?s wood export goes to Italy.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

AbstractTitle: Correlation between the levels of education and conformity to traditional masculine normsAuthors: Larsson, M., & Ljungqvist, D. (2008)Objective: This study is an attempt to explain correlations between the levels of education and conformity to traditional masculine norms. It is mainly based on the social construction of gender. Background: A high level of education is associated with a healthy living, and a high conformity to traditional masculine norms associated with harmful health behaviours. The background also presents different views of masculinity, the construction of gender and the construction of norms.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

Detta arbete handlar om vad ett va?letablerat fo?retag skulle kunna go?ra med sitt restmaterial. Vi vet att det idag finns en ma?ngd fo?retag som jobbar fo?r att minska sitt restmaterial och ha?r presenteras fo?rslag pa? vad man kan go?ra med det som a?nda? uppkommer. I arbetet presenterar vi fo?rst hur vi ga?tt till va?ga fo?r att samla in va?r information, alltsa? hur va?r forskning gjorts.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

AbstractTitle: Who are you? Who am I? ? Charades in the mediated world of today. A study of the construction of identity at Facebook.(Vem är du? Vem är jag? ? Charader i dagens medierade värld. En studie av identitetskonstruktionen på Facebook.)Number of pages: 58 (66 including enclosures.)Author: Mathilda WahlundTutor: Ylva EkströmCourse: Media and Communication Studies CPeriod: Fall 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose/Aim: The aim is to study how people construct their own identities today.

This study focuses on the Nordic model of Extended Collective Licenses (ECL) and how this model can be used in the process of digitalising and publishing archival material such as photos, letters, maps or films. The question that this study aims to deal with is what advantages, and disadvantages, there are for archives and copyright holders when an ECL is being used. To help answering this question the ?theory of the knowledge commons? has been applied. The research question has been answered through a text analysis based on legal texts including Swedish law.

In the year 2010 a transition will take place here in Sweden from the present rules how to dimension buildings in to the common rules with have been developed in Europe, the Eurocodes. Eurocode is the term for a collection standard that contains calculation rules in how to dimension constructions and buildings. They are developed by the European standardize committee.The purpose with this examination work is to get an insight of what changes this will contribute to, and how it will affect the dimensioning. Are there going to be any differences in the dimension you finally chose?To investigate these possible differences two constructions will be calculated first in the present Swedish rules, and then in the coming eurocodes.One of these two constructions will be build completely in steel, while the other will be build completely in concrete.