Sustainability Reporting has emerged and transformed over the past decades as a voluntary practice by companies across industries that desire to show proof of good conduct and environmental; social; and economic responsibility. As industrial food production is one of the largest contributors to contemporary environmental problems, it might be expected that reporting within the industry would be both well established and well understood. Unfortunately, it is neither. In light of the food industry?s considerable environmental impact and the growing popularity of plant-based food as a more sustainable alternative to dairy products, this paper assesses and briefly discusses the Sustainability Reporting of two companies in the plant-based food and beverage industry. The research was designed to compare the practices of Europe-based Alpro and US-based SoDelicious, and this study has two major purposes: to describe the reporting of the case companies and to subsequently compare their practices to the other as well as to global reporting standards. The empirical study in this paper was conducted through content analysis.

The purpose of this study was to gain a better understanding of how medium-sized construction companies adapt and how they choose to reorganize their operations in relation to the recession. The study has as its theoretical starting point theories about organizational learning, the impact of the economy on construction companies and strategies for dealing with recessions. The method used to conduct the study was semi-structured interviews with representatives from 15 different construction companies. The results of the study show that they used several strategies to adapt and reorganize the business in accordance with the recession. Some construction companies had to make cost savings as a result of the recession.

Environmental objective 17: Sustainable consumption - An attempt to integrate the global impact of the Swedish consumption with the environmental objectives system The aim of this report was to integrate the global impact of the Swedish consumption withthe environmental objectives system through presenting a suggestion for a seventeenth environmental objective ? Sustainable consumption. How the Swedish consumption pressures the global environment and methods to measure the affects was investigated. The pressure was divided into five main fields: climate, air, water, land and chemicals. The impacton humans and the biodiversity was also discussed, as well as differences between how men and women affect the environment and get affected when the environment changes.

In the last few years the environment becomes more watchful, even for us farmers. All agricultural enterprises that exceed 200 animal units must be tested according to regulation of environment. A farm business with 200 animal units and more is classed ?environmentally hazardous activities? and has to make an environmental impact assessment for the business you have today, and the activity after expansion. Before you can construct a building and expand the numbers of animals is a lot of applications to make. I have in this project restricted me to establish a environmental impact assessment and a consultation foundation. To make a environmental impact assessment is the big part of the application. The environmental impact assessment take a lot of time and you need skills for all the rules in the environmental code to be abele to make an environmental impact assessment approved. The environment codes purposes (1 kap 1 § Miljöbalken) is to rule the laws. The purpose of the environment code is to promote sustainable development which will assure a healthy and sound environment for present and future generations. Definitions of a ?environmentally hazardous activities? 9 kap 1§ Miljöbalken) shall mean the discharges of wastewater, solid matter or gas from land, buildings or structures onto land or into water areas or ground water.

Stress and burnout are two words that are commonly occurring in many contexts today. More and more people experience that they are stressed and that they does not feel well. The long term sick -leave increases as a consequence of people being burned out. These phenomena prolong over all ages, sexes, classes and professional categories, which probably means that the construction industry would not be spared.  In the construction industry, stress and bad health are no new phenomenon, already during the 1970s and big parts of the 1990 s, the construction sector were exposed to the phenomena.A sector that has a large turnover annually cannot presumably be faultless.

In Sweden there are 299 000 working in the construction industry. The construction industry is one of the industries where most accidents occur every year. During the last ten years there have been 111 death accidents in the construction industry and 48 of them were falling accidents. That means, in average, one death accident every month.Falling accidents gives serious injuries to the persons who are affected by them. It is anticipated that this report will investigate the factors beyond the falling accidents and also to present proposals that can decrease the number of falling accidents in the future.To secure a healthy and safe construction site it is of great importance that both the employers and the employees cooperate towards the same goal.

Background: The construction industry is Sweden?s single most important industry branch with a significant influence on Sweden?s wealth. The political restrictions that once controlled the industry are today almost gone. This combined with an unbalanced supply and demand situation on the Swedish constructions market, caused by urbanisation, has led to increased pressure on the Swedish construction companies who now are forced to find new methods in their struggle to contain or increase their competitive advantage. Purpose: The purpose of this thesis is to survey: which strategic variables are of great importance in today?s Swedish construction industry with focus on the four main actors, JM, NCC, PEAB and Skanska.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

This thesis has evaluated environmental classifications of projects and the lessons learned to explore what the possible ramifications of implementing this in the construction and infrastructure are. Companies today are looking to develop methods to demonstrate their environmental commitments, but there is an uncertainty regarding the contribution of environmental classifications in this aspect.The literature review presents the theory of environmental classification, which provides a general knowledge of its function. The empirical data is based on an analysis of existing classification methods and qualitative interviews. The analysis shows specific environmental classification system for the area of construction and infrastructure. CEEQUAL is currently the only environmental classification applicable to Swedish projects and therefore serves as the basis for the continued analysis.

The purpose of this thesis is to examine how the working method partnering has been welcomed in the Swedish construction company NCC and find possible explanations to this. The theoretical background used to understand and discuss our findings mainly builds on value and network dynamics. The empirical study is of a qualitative nature and builds upon 13 semi-structured interviews and the participation in a two-day start up workshop with 21 representatives from involved parties. The study shows that partnering has been positively accepted at NCC. Possible explanations for this can be found in the contrast the method represents to the traditional way of working within the construction industry.

This study aims to look at female executives? view of their leadership in the male-dominated construction industry. The study is  qualitative and focuses on the respondents' subjective perceptions. We have conducted six interviews with women in different companies whose positions within each company varied. Using theories of subjectivity, emotions, impression management and organizational structures, to support the analysis conducted, this study shows that there are obstacles for women in the industry, but it also shows that it  seems to be facing a brighter future.

Understanding how innovation and renewal occurs in an industry is important for how to manage technical development for individual companies. It is also important for creating a beneficial industrial context for renewal, from both a political and an industrial perspective, in which new solutions can arise and spread through the involvement of several actors of the industry. How innovation and renewal occurs in the construction industry in Sweden is however viewed differently. One challenge that has been pointed to is that most of the work performed in the construction industry is organized in projects, which in turn should affect how innovation and renewal can be achieved. The aim of this thesis is to provide an understanding of how the project organizing in the industry affects innovation and renewal. This is executed through a case study of the construction of Skandionkliniken, a proton therapy clinic, and by using an industrial network theory that challenges the traditional view of how innovation is achieved.

An environmental review has been carried out at FORIA AB, a transportation- and machine service company, to analyze the company?s environmental aspects from the transportation segment. This report describes the essential background and the methods of identifying and evaluate the environmental aspects. It also describes how the work with the environmental aspects often vary between different actors. The design of the ISO 14001 is intentionally broad in order to apply on all sorts of activities and organizations.

Healthy, natural pastures is very valuable for biodiversity in the form of both plants and animals. An efficient use of pastures helps to preserve biodiversity, but grazing animals needs to be de-wormed to keep them healthy and to prevent harmful parasites spread on the pasture. The awareness about the environmental impact of the frequent use of deworming agents is low among the public. Some people are unaware that the absorption in horses of anthelmintics is incomplete, which make the circumstances about enviromental effect important to investigate further. The scientific evidence in this area is limited and more studies and trials are needed to deepen the knowledge about the effects of anthelmintics in the environment.

The construction industry is currently receiving much criticism for inefficiency and slow development while demands for reduced built in moisture and efficiency increases. This report examines whether the use of field factories can meet these requirements and what factors that will be critical for future use of field factories. Industrialized construction with field factory is compared with traditional loose timber construction and industrial construction in the fields of execution, logistics and working environment. The aim of this report is to provide a basis for field factories current and future use and development. To achieve the aim of the report, people with experience in the use of the various methods was interviewed and literature studies in the various fields done.