At Volvo Construction Equipment outside Eskilstuna a wide range of heavy equipment machines are developed that are used by a variety of industries worldwide. For the handling and maintenance of these machines a deep knowledge is often required. Volvo CE and their dealer Swecon offer courses for both drivers and technicians that last for 1-2 weeks. Out on the workplaces however, the knowledge from these courses need to be supplemented with information from the machine?s operator and repair manuals.

Lime Hempcrete consists of lime, water and hemp and creates an insulating, sound-absorbing, lightweight and environmentally friendly material that can be used in wall, roof and floor structures (Bevan & Woolley 2008). This construction method is not yet developed in Sweden as there has been a ban on the cultivation of the hemp plant. This ban on the cultivation of hemp was removed in 2003, when the material got a boost. You can use it in many different ways and not just in the construction industry (Ahlsten, 2010).In this study we have investigated the possibility to produce prefabricated wall elements of LHC. We have also studied its mechanical properties and dehydration time.

Detta examensarbete syftar till att försöka redogöra för möjligheten att minska energiförbrukningen för bostäder i Sverige. Idag står bostadssektorn för cirka 40 % av landets totala energianvändning. En satsning på lågenergihus såsom passivhus kan därför komma att ha stor betydelse för Sveriges strävan mot en hållbar utveckling när det gäller energianvändningen. Det är inte bara miljön som gynnas av energieffektiva satsningar utan även den boendes egen ekonomi. Detta eftersom framtidens energipriser sannolikt kommer att vara kraftigt stigande.

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

This thesis examines and measures differences in effciency between L1- and L2 language use for solving referential problems. Quantitative measures used in the study were time and error frequency. Qualitative measures, such as how the tasks and the participants own performance were experienced, were measured by an post interview and two questionaires. Two different tasks, a sorting task and a construction task, in which each informant was given the role as a constructor or instructor, were used for data gathering. A total of 20 dyads, divided in two language groups (English and Swedish) participated in the study.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

One of the most crucial entries in the financial statements is revenue. Despite the importanceof revenue a lot of mistakes are made concerning this entry because of the extensive room forjudgements. Especially in the construction companies where a lot of differences exist due tothe fact that different standards are used for similar business transactions.The research concerning IFRIC 15 and the new upcoming standard for revenue recognition isnot very extensive. Studies including both IFRIC 15 and the new standard are even morelimited. Therefore this study aims to compare the effects of IFRIC 15 and the new upcomingstandard for revenue recognition, Revenue from Contracts with Customers, in three Swedishconstruction companies.

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Urban operations is one of the most difficult challenges a modern army can be tasked with. These challenges have been studied in history and present with various perspectives, but rarely from a combat engineering point of view. The purpose of this thesis has been to study the urban capabilities of a Swedish combat engineer company by examining if it can perform similar combat engineering fieldwork that supported the basic capabilities mobility, defence and effect in Operation AL FAJR, Fallujah Iraq 2004. These are the capabilities a Swedish engineer company are primarily designed to support in urban operations.For example, the study of Operation AL FAJR has shown that fieldwork supported mobility with breaching minefields, obstacles, walls and doors. Defence by creating defensive positions and obstacles.

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.