This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

Light pollution in urban areas - How to prevent light pollution at construction Jakob Sjöling Light pollution is a relatively new but rapidly growing form of pollution. Society's increasing demand for light coupled with the pace at which lighting technology evolves is accelerating that growth. The purpose of this study was to analyse how the construction industry plan and design outdoor lighting when erecting new buildings, specifically with regards to the issue of light pollution. It also investigated how local authorities work with these issues during urban planning. In both cases special interest was placed in ways to improve the planning and use of outdoor lighting in order to minimize light pollution.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

Our everyday life is becoming more active and the activities we perform influence the way we dress. Due to an increase in activities undertaken in an urban environment, demands are changing and the need for active wear that meets the new demands follow suit. The four characters represented in the research can be seen as a reflection of the functional features needed, including base layer, mid layer/insulation and shell.Despite the increase in activities, most of our clothes are still constructed on static dummies or drafted on a table in 2D and the main developments within the active sportswear field is driven by material innovation. By creating garments on a body in movement, my aim is to develop new functions and expression in active sportswear through construction.Construction methods in active sportswear are examined and understood through observations and reconstructions and constitute the foundation of a study of movement for a design recovery.The movement and features required for leading an active urban life sets the direction of the development of new func- tional garments. A series of trial and error sessions and draping fabric on a live model in movement created the prototypes used in functionality tests to establish their feasibility.

Detta arbete är en magisteruppsats i Systemvetenskap med inriktning data och systemvetenskap, 10 poäng, vid Luleå Tekniska Universitet. Uppsatsen klargör vilka faktorer som avgör en användning eller icke-användning av Case-teknologin. Case-teknologin möjliggör ett ingenjörsmässigt närmande till mjukvaruproduktion och systemutveckling genom att tillföra nödvändig systematik, standardisering, automation och kvalitetssäkring. Ett stort antal undersökningar är gjorda genom årens lopp med syfte att förstå och förklara varför det som teoretiskt borde vara lösningen på problemet med undermåliga system inte tycks ha blivit detta. Resultatet av undersökningen tyder på att de variabler som Prekumar och Potter kom fram till i sin forskningsmodell ? relativa fördelar, kostnad, komplexitet, kompabilitet, produkt förespråkare, stöd från ledningen och operativ expertkunskap har störst påverkan på användningsbenägenheten av Case-teknologi..

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The purpose of this report was to identify the current waste management of non-hazardous construction and demolition waste in a few Swedish construction companies, based on the different steps in the waste hierarchy with a focus on waste prevention, reuse and recycle. Additionally, the purpose was to attempt identifying opportunities, obstacles and as well as to propose possible solutions from an environmental perspective. The method used was a qualitative study using interviews conducted through emails and phone with employees occupying positions that could answer this reports questions. The results of this report indicates that waste management of construction and demolition waste has improved, and less waste goes into landfills. The concern is that the overall amount of waste being produced is not decreasing, thus calling for actions preventing the production of waste.

Stora materialmängder omsätts i byggsektorn, men en stor del restprodukter från byggande ochrivning hamnar på avfallsdeponi idag. Bygg- och rivningsavfallet är besvärligt att hantera och sorterapå grund av att mängden är stor, sammansättningen komplex och den innehåller många miljöfarliga ämnen.Syfte med examensarbetet är att ta reda på hur hanteringen av bygg- och rivningsavfall går till, vad som händer med avfallet efter att det har slängts, vilka olika faktorer som förekommer och hur avfallet kan återvinnas, återbrukas och på vilket sätt kan man förbättra hanteringen av avfallet på ett miljömässigt sätt.Examensarbetet består av två huvuddelar. Den teoretiska delen går igenom relevanta teorier ochinformation från litteratur och olika rapporter. I undersökningen tillämpas informationen från litteraturen och appliceras på de byggarbetsplatser och miljöföretag som valts att besökas.När det kommer till bygg- och rivningsavfall från olika företag kan det skiljas markant beroende påvar bygget ligger och vilket typ av arbete utförs. Det medför också hur stora massor som man slänger i olika containrar och om man har plast till alla containrar på det området som man befinner sig på..

Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.

The industrialization of construction is increasing in Sweden which leads to higher demands of prefabricated components and cells. But what does the business of construction think of the industrialized business and what can be done in order to decrease faults and errors with these products? Today we have many manufacturers who have different technical solutions which might lead to difficulties when assembling components and cells at the building site. But by trying to make a more opened market, with possibly standardized connections details and improving the communication between the different participants, the prefabricated components and cells can be made and assembled with less errors. This is something that needs to be done in order to establish a more secure business, and especially when working with new companies and methods, when using industrialized products..

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

Vi har i vårt examensarbete undersökt Helsingborgs studentsituation på uppdrag av Helsingborgs Kommun. Redan nu är det bostadsbrist för Helsingborgs studenter och värre blir det i och med att studenterna förväntas nästan fördubblas dubbelt de närmaste fem åren. Därför behöver Helsingborg ett nytt studenthem omgående. Syftet med denna rapport har varit att utreda studenternas boendesituation i Helsingborg, för att sedan kunna presentera den bästa eller lämpligaste lösningen för ett nytt studenthem. Tanken är att denna rapport ska kunna ge Helsingborgs Kommun underlag för en eventuell nyproduktion.