Sökresultat:
2913 Uppsatser om Construction documents - Sida 55 av 195
Distribuerad Barnradioterapi Mats Johansson
This thesis work aims to describe the prerequisites for a distributed treatment platform for real-time sharing of rounds performed by paediatric oncologists. The work started during the autumn 2004 and is directly aimed at improving the situation for the thirty or so specialist treating children with cancer. The work is not limited to the description of such a platform but also to select suitable software and hardware for the implementation of the platform and further more to coordinate the implementation. The production of several documents describing the platform is also part of this work. The work successfully led to the implementation of such a platform as described in the published article Barnradioterapi på distans Kristenssen et.
Target Costing i produktutvecklingsprocessen : En studie på Volvo Construction Equipment i Braås
Bakgrund: Produktutvecklingsprocessen har på senare tid kommit att ses som en strategisk aktivitet som är avgörande för företagets överlevnad eftersom produktens utförande och kostnader till stor del fastställs innan tillverkning påbörjas. ?Target Costing? har sitt ursprung från Toyota i Japan och är en metod för strategisk kostnadsstyrning som har vuxit fram för att tidigt styra kostnader. Metoden används för att integrera kostnadsstyrning i produktutvecklingsprocessen i samstämmighet med kundkrav och företagets egna vinstkrav.Syfte: Syftet med studien är att beskriva och analysera hur ?Target Costing? används i produktutvecklingsprocessen på Volvo Construction Equipment i Braås för att ge kunskap till nya potentiella användare.
Levande Skogsbruk : om problem i ett naturvårdsärende
In this study, some aspects of communication that are creating problems in a
chosen forest conservation case are explored. Focus is on how the manager of a
forest experience how he is treated during a formal decision of conservation.
The paper also gives introduction to communication theory as well as to
present forest policies in Sweden. Explanations of the most common concepts
and terms in forest conservation is presented and such a understanding is necessary if the reader is to acquire enlightment from the material and the following
discussion.
This paper focus on a conflict between the county administrative board, a
Swedish regional authority, and a private forest-manager. This is a case where
the manager feels that the authority is forcing a sale of land, because the forest
is being turned into a conservation area. The problems are not just economical,
the manager feels mistreated and left out of the discussion, and the negotiation
is long and problematic as shown in the interview and the case study.
In the study, an in-depth interview is made with the manager of the forest,
and a case study has been made based on the documents in the case attained
from the county administrative board.
Ebbas klänning Uppmätning och analys som källa till information i kombination med historisk undersökning
This study focuses on costume as a source of information. By making a case study of an 1880's dress itaims to explore the conservators potential as an investigator and conveyor of the information containedin a costume. Further explanation of this role is made by reference to several statements made by wellknown textile conservators. The paper also explores the different words used to make a new version ofa preserved or inexistant garment, gives an extensive presentation of taking patterns and an insight tothe other methods used for analysing costumes. The case study consists of an investigation of the dressconstruction, during which a pattern is taken, and a literature study of the contemporary fashion, theowner of the dress and the maker of the dress.
Passivhus, detaljutformning och dess köldbryggor
Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.
Högskolans hjärta? En undersökning av integreringen av Learning Resource Centre/LärandeResursCentrum-verksamheten vid tre svenska lärosäten
The development of higher education in Sweden poses new demands on higher education libraries. One way of meeting these demands has been to develop Learning Resource Centres (LRC), a concept that is relatively new in Sweden.The aim of this Master's thesis is to identify how the LRC-concept has been designed and integrated in three Swedish higher education institutions: Stockholms universitet, Lärarhögskolan i Stockholm and Göteborgs universitet. The thesis also aims at investigating what the Learning Resource Centres mean to the seats of learning, and in turn, the views of concerned parties in relation to the integration.The method used for the study is qualitative and based on interviews conducted with Learning Resource Centre staff, academic staff and principles or deans. In addition to this, strategic documents from the examined seats of learning are studied.Even though most Swedish Learning Resource Centres have used British Sheffield Hallam University's Adsetts Centre as their model, our study shows that the Swedish Learning Resource Centres of today have developed in various ways, due to local conditions; therefore, there is no definitive model for Swedish LRCs.In our opinion, one of the most important characteristics of a LRC should be its integration in the academic life of its university. There does not seem to be a "recipe" of how to conduct this integration.
Försöksmetod för automatisering av kvalitetssäkring av SKB
Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested. The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.
Att planera för tillväxt : med utgångspunkt i Lund och Köpenhamn
Politiska och ekonomiska svängningar samt geografiska förutsättningar präglar stadens fysiska planering samt dess uttryck och form. För Lund och Köpenhamns räkning har planeringsprocessen under drygt femtio år tillbaka skett utifrån ett antal plandokument, upprättade för att kontrollera stadens utveckling. Studier av dessa dokument visar hur städerna fysiskt brett ut sig i landskapet samt argumenteringen kring denna tillväxt. Under 50- och 60-talen bredde städerna ut sig för att kunna erbjuda fler och bättre bostäder under devisen ?välfärd åt alla?.
Förbättring av U-värde i träkonstruktion för fönster med Aerogel
When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..
Relationen mellan utformningen av digitala bibliotek och användarnas behov. En intervjustudie vid Göteborgs universitets digitala bibliotek.
The aim of this thesis is to define digital library, and to investigate a relation between the construction of a digital library and user needs. The main questions to be answered are: 1 What criteria was used when constructing a digital library, particularly concerning issues like purpose, function, design, supply, services, resources and future development of the digital library? 2 How do the digital library system designers and system builders criteria correspond with those of postgraduate researchers? And what factors affect the use? A digital library is an enterprise that gives access to information stored digitally and directly available on the net. The crucial is that the enterprise has a control over collection of information and responsibility to make it available to a defined group of users. In order to investigate the relation between the construction of the digital library and user needs, I have interviewed five key people involved with the work with the digital library and twenty postgraduate researchers from the Gothenburg University.
Klistret i klustret : En undersökande studie av ansamlingen av GIS-relaterad verksamhet i Gävleregionen
Recent years there has been discussed how the critical situation in the housing market threatens the Stockholm region's growth. The thesis objective is to examine whether there is a scientific link between the lack of housing supply and growth. The thesis also intends to identify solutions for increased housing construction, for instance by examining the conditions for a greater regional perspective and influence on the region's housing supply. The thesis empirical study is based on semi-structured interviews with representatives from the Government, municipalities and the housing industry.In Sweden, research on the relationship between housing shortages and growth has not been conducted to that extent it can be said to exist scientific evidence regarding the growth threat. However, in Britain and the U.S, empirical studies show that a lack of housing supply has hindered growth through negative impact on countries' gross domestic product.
Kappa och Klänning - Retro plagg med modern passform
För företag som arbetar med måttlistor och skisser och låter mönstret skapas på en fabrik kan det vara problematiskt att få plaggen att sitta som man vill. Speciellt svårt kan det vara med ärmhål, ärmkullar och halshål. Jag har arbetat med ett sådant företag för att ta fram en kappa och klänning från designskisser i sextiotalsstil med modern passform i storlekarna XS-XL. Moderniseringen innebär till exempel mer rörelsevidd, inte spetsig byst och längre ärmar. Till detta skapas plaggmåttlistor, materialspecifikationer och plaggdelsdokument för att plaggen ska vara färdigt för att produceras på fabrik.
Virkesgripen, ett geometriskt verktyg :
The aim of this study was to investigate and describe conceptions that been used when people talks about grapples and to put together parameters that the customers sees as important when they chose a grapple from Hultdins.
Every year Hultdins manufacturer and sells about 3500 grapples around the world. With so many users its difficult to oblige everyone. To get an apprehension of what kind of grapple the operators wanted a formula with 18 questions was made. For the interviews 20 forestmachineoperators were choicest who had experience from Hultdins grapples, a lot of them also had experience from other grappleproducers and constructions.
The study showed that it is the durability the users give priority to.
Med kroppen som spegel : tatueringen som dokument
This master?s thesis has the intent of showing that the tattoo can be regarded as an individuals document according to prevailing notions in archival science. Suzanne Briets definition of the concept of document is used in this thesis as a widening definition, a document does not have to presented in a defined form, it is only required to represent an object or intellectual phenomenon and to be informative.Tattoos are presented in this thesis as informative with regard to the status and position of russian/soviet convicts and as such presenting an individuals identity within a specific context. As documents they also provide the individual with the essential evidence of his or her endeavours in a criminal environment. Also, they have the ability to function as an individuals memories of relationships, hardships and comradeships.
Planering och projektering för individuell mätning och debitering i flerbostadshus
The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.