The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

Through a case study, I wanted to find out what advantages and disadvantages local companies consider with scrum and what they think about its future. To find out what scrum is, I read the literature and scientific articles and then wrote surveys based on my thoughts. Further, I also wanted to find out if it?s possible to use scrum in a school environment and therefore I visited a high school class who used scrum in one of their projects. The result was good but could have been better as it requires more training of scrum to understand everything.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

This paper examines how companies in a transparent industry work to satisfy the customer in an extended way, to offer value added products that in the end enables the customer to be loyal to the company. We have studied the insurance industry in Sweden and have focused on five different insurance companies. Four of them, Folksam, Länsförsäkringar, Trygg-Hansa and Dina Försäkringar, where we have focused on Ölands Försäkringar which is part of the Dina Försäkringar group, are some of the largest insurance companies in Sweden. The fourth company is Swedbank which is a bank that has started to offer insurances.Our results demonstrate that it is important for the company to see the customer not only in a profitability aspect; the company has to find out what the customer gets in return. In that case the possibility for the customer to change company decreases and the chance that the customer becomes loyal increases.

Sammanfattning Syfte:Syftet med vår undersökning var att skapa förståelse för hur företag arbetar med etiska och moraliska frågor i samband med ekonomistyrning. Metod:Vår undersökning har gjorts i tre svenska företag genom personliga intervjuer med personer i chefs- eller ledarposition på varje företag. Den insamlade empirin har sedan sammanställts och analyserats genom att jämföra den med vårt teoriavsnitt. Slutsats:Vi har kommit fram till fyra punkter som enligt vår undersökning är centrala för arbetet med etiska och moraliska frågor i de företag vi undersökt. Dessa är värderingar, förståelse, ledarskap och företaget.

First time labelling occurred was when animal owners marked their cattle in order to distinguish the differences. The need for labelling was added when the trade had expanded during Roman times in order for the customers to know who manufactured their craft. Trademarks are characterized as a way to distinguish one's own product or service from someone else. The marketing purpose is to create an identity. The brand has an important role as an effective competitive tool for businesses.A brand can have many different functions, which will simplify a customer's decision making process in selecting a service or product.

Most of the clothes sold in Europe today are produced in developing countries where the production costs are lower. The exploitation of the developing countries has led to that the inferior working conditions in these countries have attracted attention from media and NGOs. Globalisation makes company activities more transparent and the absence of transnational laws calls for alternative regulations. Many companies in Europe has since mid 1990s developed codes of conduct to satisfy the demands of external and internal stakeholders. EU also brought Corporate Social Responsibility to it?s agenda in the beginning of the 2000s and subsequently signals of approaching laws were given.

The purpose of this thesis is to study to what extent the methodological theories are being reflected in the construction of user surveys at public libraries in Sweden. The study has been conducted as a qualitative literature study in two parts. The first part is an examination of literature concerning survey methodology; the second part is a study of three user surveys conducted at Swedish public libraries after 1995. Our main results indicate that the theories about methodology are followed in part, though it cannot be determined whether this is due to any actual methodological studies, common sense, or just copying other surveys. In our study we have found some areas of user survey construction that need further attention and that would benefit from more extensive methodology studies on the part of survey designers.

That an auditor brings good quality to the work he is performing is of great importance, not only for the company in question but also for its stakeholders. The information that the company disclose gets more credibility because of the auditor quality assurance. That the auditor tenure would affect the quality has been researched with different results, dependent on the legislation in the current country or region. In this paper we study how audit quality is affected of the audit tenure in Sweden. Based on research made in Belgium we have formulated hypothesis with factors that can affect the audit quality.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

Background: As companies are operating in more globally and complex environments, the need for risk control is accelerating. In an ever-changing environment, companies cannot merely focus on traditional risks, which include financial and insurable risks. To maintain competitiveness, companies need to extend their risk management to include all risks, traditional as well as operational and strategic risks. Purpose: The purpose is to describe and position risk management for Telecom operators, in comparison with the risk management literature, with regards to structure, processes, learning process, visions and benefits. In addition, our aim is to link risk management perspectives with the different strategies for knowledge management.

Ask any constructional worker and there is a high probability that this person knows a colleague with pain or other disorders caused by working with power tools.According to the Swedish Work Environment Authority 71 percent of the Swedish constructional workers is exposed to vibrations at least 25 percent of the working hours. Despite this, the number of reported occupational sicknesses caused by vibrations is as low as 1, 4 percent.JM Ltd. is one of the largest constructional companies in Sweden. Their main business is new housing and development of residential areas. God quality and low impact on the environment is a part of great importance in the company?s long-term goals.

Background: The background shows that since the consumption patterns constantly are changing and the Internet usage is growing it creates more opportunities for the companies to interact through new media. There are two ways to go for companies that intend to use social media as a marketing strategy, to be in the possession of their own information or get help from a third party.Problem definition: What factors are important in the long term survival of the companies when choosing a social media?Objective: The objective of this essay is to analyze and evaluate the personal blog and the company blog as an information technology strategy.Method: The essay will have a hermeneutic and quantitative approach in the form of a survey. Theories: Consumer Behavior, The Buying Decision Process, Involvement Theory, Business Concept, Branding, Total Communication Theory, Word-of-mouth/web and Service Profit Chain.Empiric: The empiric will consist of the results from the survey.Results: The result shows that the blog is effective as an information technology strategy however the companies should adapt their choice of blog to the products that they sell.Conclusion: Important factors for companies that seek long-term survival are involvement, communication and loyalty. It is also important to use a relationship marketing approach. .

In commercial firms, the inventory is often the largest and most important entry and to have acorrectly valued inventory is an important prerequisite in the statement of accounts. However,the inventory is considered to be one of the entries that are most difficult to value among thecompanies assets and this is why we have investigated how large commercial firms valuetheir inventories. We have used relevant theory and conducted a number of interviews withpeople who are knowledgeable when it comes to valuation of inventories. Our conclusion isthat commercial firms work in different ways and that there is no general method which isused by all commercial companies..

The purpose of this master thesis was to examine how the corporations quoted on the A-list on the Stockholm Stock Exchange were affected by the introduction of IFRS 3 Business Combinations. Their opinion about the accounting rule and the acquired goodwill in particular was focused as well. The authors wanted to see if there were any changes in ROE, return on equity, after the introduction of the new accounting standard.Data for this study was collected through interviews, questionnaires and annual reports. Interviews were held with corporate accounting managers of Assa Abloy, WM-data, Electrolux, Ericsson and SCA. Questionnaires were sent by e-mail to 50 companies and were answered by 30 of them.