Young people?s political influence has been surveyed, studied and discussed several times in Sweden during the last decade. There is a fear among the politicians that the young people are not interested in politics, especially not in party politics. On the other hand there is, among the youngsters a feeling of invisibility, not being seen or heard or for that sake respected. There are a lot of formal possibilities for young people?s political influence, but there are not as many real possibilities or situations to actually practice these possibilities.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

SFEHA project about a clothing brand and a new kind of showroom that looses it´s structure during the process.But managed to find the core and produced a personal mirror of prints for a greater cause.Sfeh is the brand with quality and humor in focus and the will to push the boundries. With prints based on free drawing and smart thinking as it´s essential base.The project resulted with a various collection with mostly T-shirts but also textile gloves and bed sheets..

Integration of the labor is becoming increasingly topical, with increasing immigration. Labour market integration has been proved to be problematic, partly due to linguistic and cultural differences between the migrant's home country and Sweden. Difficulties with labour market integration have resulted in high numbers of unemployment and dependence on social welfare. Projects VIAM is an employment project conducted by Folkhälsobyrån AB in Västerås, aimed at finding jobs for welfare dependency immigrants. The purpose of this study is to investigate how the informants on Folkhälsobyrån and administrators on the Social service in Västerås has experienced the work of the project VIAM, development issues and the informant´s and administrator´s perception of factors that are influencing immigrant´s employment situation in Västerås.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

This paper examines how to use different kinds of source material for building surveys. The studyexamines how to use legends, construction archaeological surveys and Ground Penetrating Radar(GPR) as source material, and use them against each other to ensure the reliability they have.As a starting point I used Gräfsnäs castle ruin in Alingsås, Sweden, as an example. Gräfsnäs castlewas probably built in the Middle Ages and was rebuilt through the ages until it became a ruin in thelate 1800s. The castle ruin is today Alingsås most visited attraction.The investigation has focused on three areas which are located in the very ruin; rescue tunnels, thecellar vault and the treasure.There are legends that describe how the castle lord of Gräfsnäs fled an attack of the Danes in 1612 ina rescue tunnel which ended at the beach. At the construction archaeological surveys carried out in1935-36 they found a sewer in the courtyard that was once served as rescue tunnel and ended in themoat.

The aim for this study was to find out what strategies women use to not react against inequality and sexist prejudice. In the study I used a critical realistic approach through, primary, the social ontology presented by Margaret S. Archer. The study focus on both the women?s construction of femininity and their construction of masculinity and what directions it constitutes for the women?s social orientation.

My project aims to understand more about the methods used in making woven textiles on an industrial level, and how these tech¬niques can be adapted to create object-specific pieces. On visiting the furniture fair in Stockholm, I was surprised to see that most of the textiles used for furniture were so similar, despite the variation in the furniture itself. My project is about creating textile patterns that are specific for each piece.The idea behind the process could be used for any product, but the pattern I created is specifically for the armchair Accent by Yngve Ekström. I wanted to create the feeling of a pattern moving over the surface of the object and adjusting to it. I worked primarily with differences in density.

Bakgrunden till denna rapport är att det sportvarumärke jag samarbetat med ville utveckla en modell av längdskidåkningsjacka som fanns i deras sortiment. Undersökningen gällde att identifiera förbättringspunkter på en dam- och herrvariant av denna jacka. Avsikten var att bevara plaggens design och genom förändringar i mönstrens konstruktion förbättra passform och rörelsefrihet, och därigenom plaggets funktion. Genom att konstruera, sy toiler och prova av dessa på provmodeller, har rörelsefrihet och passform kunnat utvärderas. Resultatet visade att viktiga punkter var raglanärmens konstruktion, böjningen av ärmen, kragens form, ärmhålsdjup och placering av skärlinjer.

Today  Real  estate  companies  face  the  challenge  where  extensive  renovations  on  existinghousing built before 1980 must be performed. Conditions have changed and the housing need performance-­?enhancing measures that meet today's quality. With a current renovation rate,  it  would  take  30  years  to  meet  the  renovation  needs.  The  renovation  rate  must therefore rise dramatically, which requires the real estate companies to act consistently in accordance with commercial principles and in an economically, socially and environmentally responsible way.The  paper  discusses  renovation  strategies  in  four  municipal  housing  companies  in  the Stockholm  suburbs.  The  report  includes  surveys  of  four  ongoing  renovation  projects; Fastighets AB Förvaltaren in Sundbyberg project Hundloken 3, Stiftelsen Signalisten in Solna project Ritorp, Sollentunahem in Sollentuna project Svalgången och Väsbyhem in Upplands Väsby project Dragonvägen. The main purpose of this study was to analyze the practices of redevelopment projects.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

The purpose of this study is to examine if, how and why history teachers work with local history projects in education. The results will be analyzed based on a theory of the uses of history. I also investigate, through group interwiews with students, if and how students? historical consciousness may develop through teaching about local history. The result is a variation map of teachers? different uses of history and how students historical consciousness can manifest itself.The results of the study shows that all the teachers interviewed uses local history projects in education.

With the growth of information stored over Internet, especially in the biological field, and with discoveries being made daily in this domain, scientists are faced with an overwhelming amount of articles. Reading all published articles is a tedious and time-consuming process. Therefore a way to summarise the information in the articles is needed. A solution is the derivation of an ontology representing the knowledge enclosed in the set of articles and allowing to browse through them. In this thesis we present the tool Ontolo, which allows to build an initial ontology of a domain by inserting a set of articles related to that domain in the system.

This Master?s thesis is one of two parts of a combined project called Sustainable development around the Lake Victoria, the purpose of which is to investigate the importance of local anchoring and active participation in the work towards sustainable development. The present study aims to investigate whether men and women are empowered by the participatory rural appraisal (PRA) process promoted in their villages by the VI Agroforestry Project Masaka/Rakai. The study is primarily based on interviews with farmers within the project area and brings up a local perspective on the concepts sustainable development, active participation and empowerment. The study shows that to improve the farmers? livelihood and to create a sustainable development in the community, the farmers have to be actively involved in, and in control of, the process.

Intermodulated force microscope (ImAFM) is a type of dynamic AFM. ImAFM opens up possibilities for mapping the topography and making quantitative determinations of material parameters at the same time. With increased information the need to generate more informative images of the sample emerges. In this Bachelor's degree project I have created tools for rendering images of a sample. The topography is plotted as the height and a material parameter is color coded on topography.