This research project is based on observing and Analyzing the Role of a textile merchandiser in managing the supply chain of the Home Textiles In The Buying or retailing, in the Mill and with the Agents. The project also "highlights the comparative analysis of the practices by Followed merchandisers into the retailer side, mills and Those In The Agents', on the basis of the Functions Which Supports the supply chain. In the discussion, We Have highlighted Importance Of The Role Played by an agent and by the merchandisers of Buyer and Supplier in Different situation. By our research work we find out The Challenges face by merchandisers And Then we come up with sometime suggestions.This Research Project Has Been Developed by Contacting and Visiting Hemtex, Brink Textiles, by interviewing the merchandisers working in the Industries like Al-Abid Silk Mill . By Analyzing the data & the data through the visits and the interviews, this Research Project Has Been Combined to give in-depth knowledge about the Activities Which merchandisers performer in a mill and into buying a house..

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

Manne Bouveng, CEO of Optimel AB had an idea for a new kind of storage cabinet that could be adapted especially for townhouse owners. I came in contact with Manne by a familiar friend for us; we met and decided that it would suit as my thesis.What was needed to be done was a market research that would possibly show that there was a need for a new kind of storage cabinet on the market. Because of this we continued to work on the basic idea. We came up with a solution where we developed a box that resembles Optimels known mailbox Biggi Rondo, the storage cabinet is a new solution of a storage cabinet, adapted after a market that need of a lot of new space. The solution is based on a simple construction which sits an inside hang-off device which can attach tool hooks, tool holders and shelves and so on.The purpose of the assignment was to develop a new type of storage cabinet with some kind of solution to attach tools and other garden related stuff. With this we have succeeded and the concept meets the requirements we set ourselves at the beginning of the project..

The project has sprung out of my imagination. I wanted to find out what happened to my creativity, and my way of making product design if I used the method of putting myself into a fictive world. The project has taught me to rely on myself and my knowledge as a designer.I have made a chair which closes out sounds and gestures in public places. A chair which provides you with peace and quiet in a busy environment..

I varje projekt finns det brister i kommunikation som kan leda till att kostnad, tid och kvalitét påverkas. Varje projekt är en tillfällig organisation med olika företag och olika personer med varierande erfarenheter inom projektering. Detta medför att varje projekt är i sig unikt och hur alla ska kommunicera med varandra kan vara stora frågetecken under projekteringens förlopp. Denna rapport tittar närmare på vilka brister och svårigheter som kan uppkomma i projekteringskedet..

Galna Glassen is a company that has a unique way of selling ice cream in Sweden. The idea is for the costumer to be able to compose their own favorite ice cream, partly by choosing the flavor of ice cream but also by picking the ingredients. The ingredients that can be chosen from are around twenty and can be everything from cookies to candy to berries. When the costumer has chosen their ice cream and ingredients they are mixed together on a cooled granite board.The company was very successful when it was founded in the summer of 2011 and decided to expand to other cities in Sweden. They also wanted to explore the profitability of a mobile sales unit that is intended for festivals and events.The thesis is meant to develop Galna Glassen?s mobile sales unit.

The aim with this thesis is to investigate the risk management at the department Road construction, The National Road Administration Region Mälardalen. The aim is also to study how the risk management could be improved to better support the project leaders. Included in theses aims is to examine potential problems with the current risk management and to suggest changes. It is of utter importance to define the concept of risk, to study how risk can be measured and in which ways risk can be analyzed. In doing so, a literary study has be done and fourteen respondents has been interviewed.Risk is to be seen more as a concept than a quantity.

Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.

Under framtagandet av nya produkter måste ett antal prototyper tillverkas för att verifiera konstruktionen. För en metodingenjör som tar fram reparationsmetoder innebär prototyptillverkning att tankar som växt fram under utvecklingsfasen kan provas för första gången på en fysisk produkt. Detta sker relativt sent i produktutvecklingen och eventuella ändringar som kan uppstå på grund av att servicevänlighet inte uppnås blir mycket kostsamma. Om däremot prototypen där metoderna verifieras för första gången är digital och detta sker tidigt blir kostnaderna för eventuella ändringar avsevärt mycket mindre. Modellen som ligger till grund för metodstudierna kan sedan används för att skapa ett utkast till service litteratur, detta medför att även den delen av slutprodukten kommer att vara i fas med övriga utvecklings avdelningar. Under detta projekt har en digital prototyp av en Scania motor använts för genomförandet av metodstudier.

This has been a practical innovation graduation project withthe focus of studying the impacts of downsizing on a learningorganization. The study took place at Karlsson Spools in Sala.This has been a part of an ongoing EU project funded by theEuropean Social Fund, ESF. We have, with the help ofinterviews and surveys, gathered information on the presentsituation and with the help of theoretical studies built aframework on how a learning organization is viewed intheory.During our study we found that there are many componentsto a learning organization. The company in question hasdisplayed some qualities that characterize a learningorganization such as a plan to train and further develop theiremployees. The problem we found was lack of communicationand how this has resulted in a less successful outcome of theongoing courses.

This study is part of an international project, The Third Wave Project. The project aims to conductstudies with students of different cultures to see what they value as important in mathematics andmathematics learning. Part of the project involves carrying out a survey, the WIFI study. The WiFistudyaims to examine values of mathematics teaching that may affect student learning. The valuesthat are examined in this study are based on the mathematical values which are described by Bishop(1991).

The aim in this project was to spread play in the city and acrossgenerations. My way of approaching this challenge was to explore theborderland between playground equipment and street furniture. Thisopened up many possibilities to afford play in places where playgroundequipment often is excluded.The goal was to create one, or more, furniture with play value. The targetgroup was all vivasious people spending time in the public outdoorspace. Through user studies, a lot of serious playing and a lot of testing,the project resulted in a bench called Rollin´.

This report summarizes a Bachelor Degree Project in Integrated Product Development, carried out during the fall 2007 till spring 2008 by three students at the Product Design Engineering Program at the University of Skövde. The project was performed in cooperation with Lundbergs Möbler AB in Tibro. Lundbergs wants to start selling furniture to the public eldercare. The purpose of this project was to adjust one of their chairs. The project layout was to first make a preliminary investigation where the market, competitors? assortment and the purchasing process are studied.

Electrolux Laundry Systems is the world leader in manufacturing professional laundry equipment.The machines are used in the hotel sector, elderly care, in multifamily houses, laundry bars, and incommercial and institutional laundries.If there is oil or grease left in the clothes after washing may the heat from the dryer cause a chemicalreaction. This reaction may, under certain circumstances cause a fire inside the drum. Competitors toElectrolux has developed its own systems that extinguishes fire inside a tumble dryer and customershave expressed desire to purchase a fire-extinguishing system. Therefore, the project team receivedthe task by Electrolux to develop a fire-extinguishing system that extinguishes a fire in a tumbledryer.The purpose of the project has been to develop a system that both detects and responds to fire in anindustrial tumble dryer to meet the competitors and to satisfy customers' requirements.The goal was to develop a fire-extinguishing system for Electrolux Laundry Systems and develop afully functioning prototype.The project began with information searches on a variety of methods to both detect and extinguish afire. Subsequently, a number of different methods were used to develop a final solution and make aprototype.The result of the project is a fire-extinguishing system that extinguishes a fire inside a dryer.

Research is a time-consuming endeavor which requires appropriate tools to manage often vast amounts of information. Militarization 2.0 is a research project aiming to explore Militarization in social media. The aim of this project is to design a user interface for supporting researchers in projects involving large amounts of data in qualitative studies. The project will follow the design process of the first version of the Militarization 2.0 research database interface. The design process involves user studies, interviews and design and testing of paper and digital prototypes.