This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

The Swedish Forestry Research Institute implemented an experiment which began in the year 1979 in a by moose browse damaged area in Sweden. An audit in 2014 of the moose browsing study called ?Furudalsförsöket? is the underlay to the study's results. By comparing Scots pine stands development in relation to known damage obtained thereby gives the understanding of how browsing affects the short and long terms impacts of Scots pines quality and volume production. The results of this year's audit reveal that the standing volumes in the undamaged and damaged areas represent a significant difference. The number and volume of the ingrown trees constitute a larger proportion of the areas that have been heavily browsed. It also proves once again that that all damage classes had a downward trend, which means that the damage is concealed with time.

Oxygen consumption and carbon dioxide production are usual measurements within the sports and training physiology. The same measurements are also common when it comes to establish the amount of energy that is used during work and to establish the intensity of work. The volume of oxygen that is consumed contra the volume of carbon dioxide that is produced can be used to calculate the metabolic rate within the human body. This calculation shows the percent relationship between carbohydrates and fat in the metabolism. The first accurate method to measure the breathing gases for use in metabolic calculation was established in the early twenty century when the Douglas bag method was introduced.

A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

Deposited waste material degrades within a short period in anaerobic environments. The methane gas that is formed provides a harmful contribute to the greenhouse effect, 23 times larger impact than carbon dioxide. It is therefore desirable to minimize the emissions of methane gas from landfills. This may be achieved by drain the landfill of gas. In this thesis the amount of produced methane gas at the landfill at Örebro has been calculated. Estimations have also been made of the amount of methane gas that might be produced in the landfill in the future.

The purpose of this study was to examine the extent to which incontinence aids, used in local authority/municipal nursing homes, were adapted to the resident?s urine-leakage volume and to find out how nurses perceived the current situation concerning individual testing of incontinence aids in municipal nursing homes. The study method was a quantitative empirical study and was carried out in two phases. The first phase was a weighing test, carried out in three nursing homes, whereby the incontinence aids used by 25 residents during a 48 hour period were weighed. The second phase was the completion of a questionnaire by the municipal nurses working in the same local authority.

The purpose of this study is to investigate whether it is possible for SCA to update their stand register with use of digital aerial photos photographed with a Zeiss/Intergraph DMC. ?Updating? in this study implies the delineation of stands and estimating stand variables such as average stand height, volume density, stand volume, and tree species composition in order to identify stands which can be of current interest for thinning. The study also includes how the aerial photo material and experience of the interpreter can influence the quality of the interpreted variables. The aerial photo interpretations were made by both experienced and inexperienced interpreters.

Detta arbete undersöker 4 olika algoritmer som används för bred kollisionsdetektering. De olika metoderna för bred kollisionsdetektering kan delas in i 4 olika kategorier. Algoritmerna som är valda att representera varje kategori är Bruteforce, Sweep and prune, Hierarchical grid och Bounding volume hierarchy. Fokus i arbetet ligger i att mäta deras lämplighet för spelmotorer där det är viktigt att algoritmerna kan köras i realtid.Algoritmerna körs i simulationer av olika miljöer. Där antalet objekt, hur många som är rörliga och objektens distribution varieras mellan miljöerna.

Title:Product abandonment ? A comparative study of five ABB-units Level:Master thesis in Business administration, spring 2011.Purpose:The purpose of this paper is to through a comparative analysis examine how different companies, within the same group, works with product abandonment and what factors influence the process.Problem:How important is situational and product specific factors in a product abandonment process in which the organizational factors are constant?Method:This study is based on primary as well as secondary data where interviews represent the primary data. Interviews, following the same interview guide, were made with five companies within the same group.Result:The results from the empirical studies presented in the text below recurring themes derived from the framework.Conclusions:Our conclusions are that the importance of product specific factors is of significant matters in a product abandonment process, even when organizational factors are constant. We base that on that although the companies are within the same group, under the same strategic direction and constructed according to the same organizational structure the product abandonment process is different for the respective companies.Keywords:Product abandonment, product deletion, product elimination, weak products, ABB .

Back and forth is a study on wayshowing at events focusing on the Siesta festivalin Hässleholm. For several years the interest in festivals has increased, whichhas contribute to expansion among festivals. The Siesta festival in Hässleholm istoday one of the major festivals in Sweden, attracting 10 000 visitors each year.The festival?s strong expansion has contributed to disorientation in the festivalarea, because it has never been constant from year to year. A side effect of this isthat the orientation is a constant problem.Therefore this study aims to investigate how a clearer route guidance systems onthe Siesta Festival can be designed based on existing designprinciples onguidance and orientation and how the information can be accessable towheelchair users and those with some kind of colourblindness?Surveys among festival visitors and interviews with the festival organizers for thefestival showed which navigation strategies that are most used on festivals.

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

Koloni is a concert promoter that put up shows in lots of different locationswith a wide variety of music styles and artistic expressions. In this work I havecollected material from Koloni?s nine years of existence to form a volume. Thevolume tells the story of Koloni?s work, but also shed some light and understandingon the alternative cultural scene of today.

The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.