This master thesis deals with the differences in the design of the environmental scanning between different kinds of organisations, as well as the demands and regulations etc. in the respective environments that influence the environmental scanning. The content of the environmental scanning and the organisation of the function are outside the scope of this study. Two organisations that do not have an organised function but are scanning their environment were chosen for the investigation. A model for conducting the environmental scanning developed by Frankelius is used to analyse the practice of environmental scanning.

In a sequence described in the next paragraphs, I remove the poorly insulated roof of Gustavsberg Porcelain Factory and make new use of its  foundation. The monolith cement slab, once supporting heavy industrial machinery, is now the site of lakes and other movements:The top floor area is split, and a new built volume, one story higher, overtakes the southern half resting on the factory?s basement, digging into it at its western and eastern ends. Striking horizontally, the fissure exposes a long central axis, taking advantage of the factory?s horizontality to articulate vastness .

Quality is the key to a well executed product or service. The construction industry hasn?t highlighted the quality in recent times which have contributed to the construction industry receiving much criticism in the field. The public sees it as an offhanded industry where errors and delays are common.The reason for this is considered to be primarily the lack of time, constant pressure to reduce costs and skills and the ability to communicate between the parties about what the correct quality really means. The industry has begun to realize that it must start setting clearer standards and that there are great opportunities for improvement.This report will give Peab an opportunity to develop their quality work.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

In 2007 Swedish Meats, the dominant Swedish meat-producers cooperative sold its slaughtering and processing industry. The goal of a producer cooperative structure is to create value for members through vertical integration, and to strengthen members? market position. When Swedish Meats sold the slaughtering and processing components, it ceased in some respects to serve the function of a cooperative. This is a lost opportunity for both members and non-members, because Swedish Meats as a functioning cooperative could have exploited its dominant market position to positively effect producer?s prices.

This Master´s thesis examines the conceptual ideas of science fiction and science fiction fandom produced in the Swedish fanzine Science Fiction Forum (1960-) between the years 1960 and 1980. Science Fiction Forum was and still is a fanzine published by Skandinavisk Förening för Science Fiction (Scandinavian Science Fiction Club). Both the club and the fanzine are a part of the phenomenon called fandom.A fandom is a collective of people called fans who form a community by sharing a special interest in a special object. The fanzine is one of the many material products produced by fans within a certain fandom. Science Fiction Forum and Skandinavisk Förening för Science Fiction were founded in 1959 and are a part of swedish science fiction fandom, where the object of fandom is literary science fiction..The primary focus of this thesis is the meta discussion on science fiction and science fiction fandom in Science Fiction Forum.

For many decades the increase in traffic volume, expansion of highways and infrastructure has lead to an increase of wildlife vehicle collisions which are unfortunately very common in many countries today. They cause great deal of material damage and even kill humans or wildlife. Measures in the form of warning signs, under- and overpasses and fencing have been implemented for a long time with the help of observation by hunters and collisions sites. However this study focuses on the moose?s perspective and the variables that, both spatially and temporally, could have an effect on why and when moose are close to certain types of roads.

When the population is getting older, the need for complex care and nursing interventions in elderly care increases. To create a holistic view of the elder and their life situation, interprofessional team collaboration is often desirable and necessary. Teamwork is often described in positive terms, but previous research has shown that this work method is complicated and requires constant reflection and development. The purpose of this study was to investigate how elderly care teamwork is formed in the interaction between representatives of different professionals. To accomplish this purpose, we have studied how the team members define a well-functioning teamwork and difficulties, and how consensus is achieved in the team.

The rise of the Swedish Democrats, as a political party in Sweden, has been surroundedby controversy both within and outside of the media. As such a polarizingtopic, the party has been the focus of negative and positive attention. On onehand it has been considered a racist and xenophobic party due to its policies onimmigrants. On the other, it has also been seen as a solution to what has been consideredby some to be a constant problem in Sweden, for those same policies.These policies are motivated by what the party perceives as a threat to Swedishsociety. That is to say, immigrants are a threat to Sweden because of thechanges they impose on the Swedish identity.

This thesis will describe the redesign of the manure fork SverigeGrepen. The productis available for purchase in Scandinavia and and parts of the rest of Europe.The product is available in stores but the companys goal is to start distribute it overthe internet. A problem today with a purchase over the internet is that the costumerhas to pay a high shipping-fee due to the products unique form. The long handlecontributes to the high shipping-fee which makes it hard to attract costumers topurchase the product online. Deficiencies have been found at the manure forks basketand needs to be examined.

During the past twenty years, the Swedish school systems have slowly changed to becomemore and more performance-driven. Private schools have been growing in general and, likeindependent schools and schools managed by municipalities, they profile themselves. Schoolsare becoming more performance and result-oriented, which has changed the roles of teachersin a dramatic way and is in general, still changing.By profiling students based on theirindividual performance, schools are able to help students identify themselves and their owngoals. The process of profiling is a slow one in which some teachers adapt more quickly thanothers, and one that is critical for other teachers to learn in order to keep up with the demandsof society.Schools, like ordinary businesses, are in constant competition with each other to keep up withthe newest and greatest models of teaching and to rank among the best in high achievements.Perhaps the downside of this modern school structure is that it is often difficult to have aschool where both school management and teachers see eye to eye. School management must heavily focus on the school?s results as a whole.

There is a new beverage container on the market, a bottle made out of pure aluminum as a replacement for the traditional container made out of glass. This new container has the potential to reduce both cost and pollution during transportation, the lighter and stronger construction has every advantage compared to the old one in glass. The new container has every possibility to make it on the market. Some of the biggest brands within the soft drink market already use these bottles in countries without any recycling demands like: Coca-Cola, Heineken and Pepsi. The only thing stopping these brands from the Swedish market is the lack of a functional return system, there is only one company that uses the bottle in Sweden today and they take care of their own used bottles.

In 2007 Swedish Meats, the dominant Swedish meat-producers cooperative sold its slaughtering and processing industry. The goal of a producer cooperative structure is to create value for members through vertical integration, and to strengthen members? market position. When Swedish Meats sold the slaughtering and processing components, it ceased in some respects to serve the function of a cooperative. This is a lost opportunity for both members and non-members, because Swedish Meats as a functioning cooperative could have exploited its dominant market position to positively effect producer?s prices.

Purpose: The purpose of the study is to gain a deeper understanding of influencing behaviours concerning individualized viewing in relation to VoD-services (Video on Demand), and how this reflects the perceived viewing behaviour in terms of habits, content and social actions.Theory: The theory that primarily underpins this study is Jacob Bjur?s thesis Transforming Audiences. Bjur?s thesis provides an analytical model of individualized viewing behaviour that has been used in this study case. The model is founded on three central tenet areas of individualization, Habitualness that ensures habits, Socialness that refers to the social space and Referential space that ensures content/selection and viewership as a referential act.Method/Material: The study is based on a qualitative research method underpinned by focus groups interviews.Results: The research demonstrates strong tendencies towards an individualised viewing behaviour in the use of VoD-services.

The purpose with this thesis was to examine the cold rolling mill located at Högskolan Dalarna and to stabilize the rolling process, to achieve steady state. Experiments with cold rolling of an aluminium strip have given results for rolling force, friction, reduction, strip tension and strain hardening. Results show that steady state has been found for the experiments with roll force and strain hardening, and not been found for the experiments with friction and reduction. Results show that increased strip tension gives lower roll forces. The roll force equation of Stone shows comparable results with reality for dry contact with reductions up to 30 %, but starts being incomparable with higher reductions.