The project was carried out together with OC Off Course who manufactureand distribute mainly electric bikes.In today?s society, alternative sources of transportation becomes more andmore present and several bicycle sharing programs arises in major citiesacross the world every year.Something that doesn?t exist too much as of yet is bike sharing programsthat uses electric bikes. An electric bike is a convenient way oftransportation as well as a good way of avoiding traffic. With an electricbike you avoid having to sweat when biking over hills or when you need totravel over longer distances.The goal of this project is to develop a bike sharing station according tothe functions need to be met.This thesis Is based on Fredy Olsson´s methods principkonstruktion aswell as a couple of concept generating methods from Kenneth Österlin.From this, a number of sketches were made that later was evaluated inseveral steps in conjunction to a set of specifications. A 3D model of theselected concept was later made in CatiaV5 for a complete product..

Collections, compilations and databases currently stand under a solid intellectual property protection in Sweden. This legal protection is partly a product of the old Nordic ?catalogue-rule? seen in the former 49 § of the Swedish copyright act (upphovsrättslagen) but was further extended by the implementation of the EU directive on the legal protection of databases 96/9/EG and the new sui generis-right. Since major values are represented digitally combined with the fact that Internet serves as the main provider for information a strong legal protection for databases must be carefully crafted. When crafting this kind of legal protection the right to freedom of information is balanced against the database producers? interests of property protection as well as social and public interests such as increased innovation.

This Master Thesis has been carried out as a new product development project in collaborationwith G-Man Tools AB located in Edsbyn. The purpose of the project was to construct a newpruning saw there the blade is integrateble in the handle, thus a foldable pruning saw.The work has been performed on the occasion of G-Man Tools AB wanted to improve theirproduct range by creating a saw that complement their range of quality saws. They have a similarproduct today, but they do not manufacture this product by them selves and it is not directlytargeted against garden use, which is a disadvantage when it is one of their major markets.Even though almost the entire chain from the requirements of the users to drawings has beentaken into consideration, emphasizes has been put on generating ideas. However the first thingthat was carried out was to establish a productspecifikation from interviews with users and thecompany?s experience.

The concept of sustainable development is a challenge that demands cooperation from all levels of society for it to be successful. The focus for this thesis is how politicians within the local councils understand the concept of sustainable development and how they implement it in political decision-making.The basis for the study is a questionnaire that was distributed to 303 local politicians in three municipalities of varying size in Southern Sweden. The study concentrates on departments within the local councils that are directly connected to the Swedish environmental law and the Swedish planning and construction law. One of the primary goals with the aforementioned laws is the achievement of sustainable development within one generation.The outcome of the study was that over half of the local politicians could correctly define sustainable development according to the World Commission on Environment and Development?s (WCED) definition.

The competition for the beach promenade in Helsingborg was announced in 2001 and was arranged by the city of Helsingborg. My contribution to the competition represents the main part of my thesis in the Landscape Architecture Programme. The competition entry is based on the concept of crossing screens of vertical elements which connect the pattern and structure of the city to the beach and the water. The different materials and designs of the screens relate to the various characters of the different parts of the area and they form a sequence and uniting theme along the beach. In addition to the competition entry which was made in 2001, the thesis contains a second part, made in the spring of 2006. It consists of an Introduction with the competition programme and a description of the starting points, a part called Method where the process is described, and the Conclusion with reflections on the competition entry and the process where I also introduce and comment on some other projects which in different ways have are connected to my concept. .

This study was built on the concept of Emotional Intelligence (EI) as an ability with four branches, to effectively: (1) perceive (2) reason (3) understand and (4) manage emotions. By closely studying the four processes of EI through eight semistructured interviews with psychologists, counselors, CBT-therapists and psychotherapists, a study of participants' stories from real practice was done and then analyzed and interpreted. The purpose of this study was to get the participants to describe and put words on practical experiences that occur with clients that correspond to the four domains that define the concept of EI according to Mayer et al. (2008) and find out about if their way of "doing" EI gets trained and developed after several years of professional activity. The results shows that the practitioners used all four branches of EI in dialog with the client, both intra- and interpersonal.

The purpose of this essay was to explore how the concept of gender identity is constructed, by doing a discourse analysis of texts from two different perspective discussing intersexuals, and to define the areas where the discourses doesn't agree. The two perspectives were; feminist- and medical perspective.How are sex/gender identity constructed in the chosen articles?What themes can be seen in the discourses?My method was discourse analysis. A discourse can be described as a way of talking about and understanding a part of the world. The analytics task is to define the discourses, which the world is constructed by.The areas of conflicts have been found.

This study was conducted on a property with a thinning machine team. The purpose was to investigate in which machine, the harvester or the forwarder, that caused most damage to the trees in six different stands. Different factors, related to the damage frequency in the stands, were checked out. For example: basal area per hectare, thinning strength, tree diameter and the rate of production. The harvester drivers were also interviewed about how, when and why stem damages occur and how to minimize them. The study stated that 4.3 percent of the trees were damaged. Out of these 88 percent was caused by the harvester and the rest, 12 percent, by the forwarder..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The project was carried out together with OC Off Course who manufactureand distribute mainly electric bikes.In today?s society, alternative sources of transportation becomes more andmore present and several bicycle sharing programs arises in major citiesacross the world every year.Something that doesn?t exist too much as of yet is bike sharing programsthat uses electric bikes. An electric bike is a convenient way oftransportation as well as a good way of avoiding traffic. With an electricbike you avoid having to sweat when biking over hills or when you need totravel over longer distances.The goal of this project is to develop a bike sharing station according tothe functions need to be met.This thesis Is based on Fredy Olsson´s methods principkonstruktion aswell as a couple of concept generating methods from Kenneth Österlin.From this, a number of sketches were made that later was evaluated inseveral steps in conjunction to a set of specifications. A 3D model of theselected concept was later made in CatiaV5 for a complete product..

The purpose of this study is to investigate whether the new Swedish curriculum, GY11 brought with it changes to how non-religious world-views are presented in five different books in religious education, RE. The method used to analyze the material was a qualitative content analysis as well as counting the pages that dealt with secular world-views. This was later analyzed using philosopher Charles Taylors description and theory on secularization. This was used to identify secular processes as well as to define wether the books definition and description of secular world-views using Taylors concept of ?exclusive humanism?.The research questions are:? What are the authors writing about when describing the secular world- views?? What differences and similarities are there between the different editions prior and after the implementation of the new curriculum, GY11?? Are the secular world-views presented in a way that is compatible with Taylors concept of ?exclusive humanism??The results that are being presented are, first of all that the change between the different editions are not big.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.