The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

This essay deals with the subject of communication through Facebook. In this survey we studied 100 youths from Karlstad and their communication habits and behavior patterns on Facebook. The social network site Facebook has since its start in 2004 made a mark in modern communication. Today in 2010 the site has more than 500 million users. This paper wants to study what happens to other types of communication.

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).

This thesis examines which function the information technology may have in thechildren's library, with the example from two library computer programmes. One is anexpert system, Hedvig, which will help children to choose and to find books, and theother is a computer game, The mysterious signs, that will teach children library user education.The main question is: What conceptions do the project-leaders, the children'slibrarians and the children have concerning the function of these two programmes in thechildren's library?The study is based upon qualitative interviews with two projects-leaders, fourlibrarians, three computer programmers and twenty-eight children.The theoretical material consists of examples on other library computer programmesfor children developed in Denmark and USA, some American studies in children'sabilities to use computerized information retrieval systems, and studies concerningchildren's relations to computers.The adult's conceptions of the computer programmes are divided into categories asfollows: Democracy, aspect of sex, complement, marketing, reading promotion,development of competence, information technology development, pedagogics, adulteducational activities, compensation and armusement, pedagogics, usefulness,effectiveness and information. These categories shall be seen as the conclusions of the thesis..

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

This essay examines how three big Swedish newspapers depicts e-sports and computer gaming and how the depiction change during 2000-2013. The study will also examine whether e-sports is being portrayed as competitive sport. The purpose is to investigate which attitudes that can be identified towards computer gaming and its culture in major newspapers such as Aftonbladet, Dagens Nyheter and Svenska Dagbladet and how these attitudes eventually changed over time. The sources that will be used in both the quantitative and qualitative analysis are based on web articles, mainly because the paper editions does not provide much, if any, information about computer gaming and e-sports and also because of the convenience of being able to quickly find articles to study. Results indicate that computer gaming is being depicted in a clear negative fashion during 2000-2006, and that the depiction of e-sports is somewhat positive but not as glorifying as for the years 2007-2013. During this period, there is a apparent tendency of e-sports being introduced to readers who are unfamiliar with the gaming culture. As for the attitudes towards computer gaming, the depiction is still somewhat negative, mainly because the debate about computer games and violence was revived because of several acts of violence in shape of school massacres and mass murder.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.

Visualization is a rapidly growing area of computer graphics. Due to the very progressive development of computer technology and especially 3D-graphic boards yesterdays imagination of visualizations, today is a reality. At Saab Bofors Dynamics in Linköping missile systems are developed. Through the development, different subsystems are simulated before the manufacturing starts. The results of these simulations have to be visualized to get a meaning.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The work was an assignment from Jarlträ AB which is a privately owned sawmill located in southern Småland. The aim of the work was to investigate the economical result of different pricelists and how to adjust different parameters such as length correction to give an optimal result. The pricelists was examined through a computer program (SilviA). The pricelists was made in the program and after that a simulation was preformed with a selection of random sampled trees gathered from the area nearby the sawmill.

This essay deals with the subject of communication through Facebook. In this survey we studied 100 youths from Karlstad and their communication habits and behavior patterns on Facebook. The social network site Facebook has since its start in 2004 made a mark in modern communication. Today in 2010 the site has more than 500 million users. This paper wants to study what happens to other types of communication.

To enable the enhancement of the driver's environment in a forklift, an alternative form of steering has been evaluated. An earlier concept with a combined driving and steering wheel has been exchanged to a concept with two driving wheels. A link wheel has replaced the combined driving and steering wheel. The steering is done through differentiation of the velocities of the two driving wheels. The scope of this master thesis is to create a simulation model, create a control program and to evaluate the concept of two driving wheels.

AbstractConsider a ?uid being heated from below. The heating leads to an upward convectiveforce that is counteracted by the viscous forces of the ?uid. If the convectiveforce is large enough in comparison to the viscous forces the ?uid will be put in anunstable state.

AbstractIn urban societies people spend more and more time indoors, which put great demands on the indoor environment. If the ventilation is to manage the removal of unwanted substances in the indoor air, a good mixing of the air is required. The question arises that, whether the buoyancy forces will counteract a good mixing of the indoor air or not?This report aims to clear up the difficulties whether you need to consider the buoyancy forces or not, when adjusting a ventilation unit. For studying the indoor mixing of the air a two dimensional model is constructed in COMSOL Multiphysics.