Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

The main purpose of this study is to investigate and understand how technology students handle information especially when they are working with their Masters thesis. A further purpose is to examine how technology students use library resources of the Linköping University. The research method used is grounded theory, where description of the method is an integral part of the study. Twelve qualitative interviews were made with newly qualified graduates from the engineering programs of Linköping Institute of Technology. The respondents were divided into two groups, A and B, with six in each group.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

Today it?s common that companies and organizations are facing several challenges and problems when it comes to making their IT-environment more efficient. Some of these are the management of user?s computers and file security. Comput-er users are often tied to their personal computer due to personal programs and files.

Länsstyrelsen i Stockholms län hade en projektidé som gick ut på att det skulle skapas en Internetbaserad ansökan för körkortstillstånd med behörighet B, inklusive hälsodeklaration. Även en optiker skulle kunna fylla i ett synundersökningsformulär via webben. Dessa skulle sedan knytas ihop för behandling av den Länsstyrelse där den sökande bor. Alla personer som skall använda tjänsten måste inneha ett personligt medborgarcertifikat som används för elektronisk signering av ansökan. Optikern behöver ett företagscertifikat för att identifiera sig. Vi utvecklade två interaktiva användargränssnitt samt ett gränssnitt där administratören kunde hantera all data som inkommit.

Målet med projektet är att utveckla ett system där det skall gå att komma åt information från en intern databas på ett enkelt sätt med en mobil enhet. Eftersom varje enskild databas är unik så skall det gå att justera systemet enkelt genom ett administrationsgränssnitt så att det passar till varje databas. Informationen är oftast känslig och skall inte åtkommas av obehöriga användare, så den mobila enheten behöver autentiseras för att skydda informationen. Systemet kommer alltså bestå av ett par applikationer:1. Webbtjänst som skall kommunicera med databasen och skicka information till webb- och den tjocka klienten.2. Webbaserad klient, skall kunna visa data från databasen.3. Tjock klient, skall kunna visa samt uppdatera data från databasen.4. Administrationsgränssnitt som skall kunna konfigurera webbtjänsten. För autentisering av användaren används telefon ID:et och sköts automatiskt av den tjocka klienten.

During the period of this project I have programed a web site in php4, and also built the database in MySQL. The purpose with the projekt is to create a common web site for the various activities in the different churches located in the area of Örnsköldsvik. In my project I have chosen to try to find a structure of programming that fits my needs as a dyslexic. In the essay you can find a more thorough description of my procedure and the structure that I have chosen to use. .

Computer use at work has risen considerably over the past fifteen years and is currently a relatively common phenomenon when 76 percent of women and 72 percent of men using the computer in their daily work (SCB Arbetsmiljörapport 2009).According to Gulliksen and Göransson (2009), Sweden is one of the countries which are more advanced in the procurement of computer systems at work. He means that Sweden has unique opportunities and conditions for user participation in the development of computer systems, when the user has the right to influence their working environment through a law in the Work Environment Act. The paper examines the importance of user involvement in system development and the Swedish company's approach and experience of user involvement. To highlight and explore the importance of user involvement, there has been a case study in which users have been representative of the development process. The case study has been conducted on a case company where the system IST analys was in need of a new interface.

To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.

Detta examensarbete innehåller en introduktion till informationssystemutveckling och Requirements Engineering (RE). Vikten av att utföra RE på ett effektivt sätt är stor. Hela informationssystemet blir lidande om denna del inte utförs på ett tillfredställande sätt. För att utföra RE finns en rad tekniker och verktyg. Detta arbete behandlar en teknik i RE, nämligen Use Case-modellering.

This essay is a study that takes interest in technical and technological change essential to philosophy of science. What is shown is the importance of an active attitude towards this change, by the articulation of the question: Does technical development lead to new ontological questions for science? - and by the answer that such questions do appear.It is clear that passive assumptions in this matter might prohibit science in the proceeding search for truth.By examples of ways in which technical development helps and challenges science, it is concluded that scrutiny of the relationship between technical development and ontological suppositions and hypotheses within science is well motivated..