This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

This essay elucidates upper secondary students? literacy practices, (literacy events, literacy competencies and literacy culture) during a typical day, with focus on the daily literacy practices. A literacy ethnographic study conducted in the environment which participants naturally are, at home, at school and in leisure. The study is inspired of a project, Skriftbruk i arbetslivet, ´Literacy Practices in Working Life´, that conducted by Anna-Malin Karlsson, Per Ledin and Olle Josephson, in collaboration with Vetenskapsrådet ´Science Council´(2002-2004).The result of this study shows that students from professional preparing programs not use such literacy competencies that been tested in traditionally reading comprehension test, particularly much. However, do they read a lot during the literacy practices day by television, computer and mobile phone.

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

Intranet is today a common technical groupware to communicate in many organisations. People can interact through the Intranet and communicate within the organization and get relevant information according to their workplace. It can be difficult to get everybody to use the Intranet as an information- and communication tool. This causes problems when people want to reach out with information. With these thoughts we entered our work at Luftfartsverket at Arlanda airport.

Since studies points out declining interest in science among students in Swedish schools, I have in this paper chosen to examine how some students at the Social Science Programme are experiencing the lessons in Natural Science and how to make lessons more interesting according to these students.The purpose of this study was to gain a greater understanding of how teachers would develop new perspectives and tools to make lessons in Natural Science more interesting. I also wanted to investigate whether an intercultural perspective could be a possible tool to increase students? interest and motivation.As a theoretical framework, I have assumed Vygotskij's sociocultural perspective, Habermas's theory of deliberative conversations and an intercultural perspective. Through a qualitative approach, I conducted interviews with students and teachers. The main results showed that students felt that natural Science lessons were too theoretical and undemocratic and that they wanted to have more student interactions, such as discussions and group works.

The world is increasingly coalescing, ecologically, economically and culturally. Many problems can no longer be solved within the own state borders and the limitation of the territorial state is obvious. Jürgen Habermas means that a world domestic politic without a world government is what this progress need. Therefore it is important that national interests become less central and the solidarity between people is given priority in international relations. The focus of this thesis is therefore a critical discourse analysis of the current position of the internationalisation of Swedish security and defence policy.

Det finns flera olika metoder och tekniker för tredimensionell rendering, alla med olika för- och nackdelar som lämpar sig för olika applikationer. Voxelbaserad rendering har använts flitigt inom vetenskapliga områden, främst inom det medicinska för visualisering av volymetrisk data. Tekniken används nu inom flera olika områden för tredimensionell rendering, t.ex. i datorspel, i matematiska applikationer och vid geologisk rekonstruktion. I den här rapporten kommer voxelbaserad rendering med Marching Cubes-algoritmen undersökas för att se hur den lämpar sig för realtidsapplikationer. Området behandlas dels teoretiskt, men även praktiskt då en implementering av Marching Cubes gjordes för att genomföra några tester för att se hur prestandan påverkades. Av testerna framkom det tydligt att algoritmen lämpar sig väl för realtidsapplikationer och dagens grafikkort.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

Spel idag kräver en enorm mängd arbetstimmar för att skapas, därför behövs alltid sätt att spara tid och automatisera processer. Algoritmer för polygoniseringen av skalärfält, som Marching Cubes, har under de senaste åren blivit ett allt vanligare tillvägagångssätt för att automatiskt generera terräng. Scenkomplexiteten och kraven för visuell kvalitet i dagens spel ökar ständigt. Därmed kommer också kravet för prestandaeffektiva renderingsmetoder. Deferred rendering är en renderingsmetod som kan hantera scener med stora mängder ljuskällor och hög scenkomplexitet samtidigt. För att undersöka integreringen mellan procedurellt skapad terräng och en deferred rendering pipeline, skapades en applikation i DirectX 11 för att undersöka implementeringen och potentiella optimeringar av denna integration..

I Sverige och utomlands har man på senare tid sett framväxten av ett nätverk av s.k. Science Centers (SC). Dessa SC har som viktigaste syfte att öka besökarnas naturvetenskapliga intresse. När det gäller elever från högstadiets senare år kan detta ökade intresse för naturvetenskap t ex visa sig i form av en ökad benägenhet hos eleverna att söka sig till ett naturvetenskapligt inriktat gymnasieprogram.Vi har utvecklat och använt en enkät-baserad metod för att undersöka den påverkan på elevers intresse för naturvetenskap som ett besök på SC har. Enkäten är lämplig att användas för elever från grundskolans senare årskurser.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.

Dagligen interagerar människor med IT-system och internetanvändning har blivit en viktig del i många människors liv. Med fler användare än någonsin hanteras ofantliga mängder information och samhället ställer allt högre krav på IT-säkerhet. När det gäller att skydda sin integritet, tillgänglighet och sekretess vid internetanvändning fokuseras det ofta på tekniska åtgärder, såsom brandvägg och antivirusprogram. De tekniska åtgärderna skyddar användaren till viss del, men det räcker inte för att förhindra ett bekvämt och naivt mänskligt beteende. När säkerheten brister beror det oftast på den mänskliga faktorn.

Relationship between social behaviour, feeding behaviour and performance of boars using single-space feeders A study on the behavioural patterns of growing boars is presented. The study was preformed at Quality Genetics? boar testing station Månseryd in Sweden. The boars were purebred Yorkshire, Hampshire or Landrace, born in nine different nucleus farms. The study is based on two batches of boars, with 63 and 69 boars respectively.