Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The purpose is to analyze if the students have any use of their computer education at a senior high school level or if there is a demand for them to proceed studying. Does the students background have any importance or is it their own motivation that makes the student advance to higher education.In this report we ask ourselves the question, if the students have any use of the knowledge gained at senior high school in computer studies at a higher level. Do the students have any chance for employment based on their senior high school grades in computer studies after graduation?  Do the schools that follow the senior high school guidelines within programming and databases give these students an advantage towards those that have not received the same fundamental education?The method used for the survey is a group questionnaire.  The questionnaire was distributed at one and the same time and then collected to examine the results. The survey results showed that students who seek work based only on their senior high school grades, received only a temporary position for different lengths of time.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

This Batchelor?s Thesis concerns 20 points at the MDA-program (People, Computers and Work) at Blekinge Institute of Technology in Ronneby, Sweden. 10 points concerns Computer Science and 10 points Human Work Science. The thesis is about the process of starting a new department of Blekingesjukhuset [Blekinge Hospital] in Karlshamn, Blekinge called Sjukvårdsrådgivningen [Health Care Advice Bureau]. The thesis starts with a description of the ethnographical methods used, followed by the process of establishing the department. In this new department, the nurses are using a computer based system called Teleråd, developed by TietoEnator. The thesis takes up the issues of how the department uses this system today and concerns what ?user-friendliness? is.

The visual complexity in real-time applications, like computer games, is increasing with customer demands on vissual apperance. This trend is supported by even better graphics cards from the hardvare industry. This must be taken into consideration when the architecture of a new graphics engine is to be designed. The engines renderer is responsible of generating a picture of scene data. The renderer must cope with increasingly more complex scenes, and must be able to render them depending on available hardvare capasity.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

This thesis will address a problem concerning availability of information systems at an enterprise within the financial sector and its external suppliers, so called trusted third party. The information system resides on the internal network of the enterprise and must be available to both employees of the enterprise and the trusted third party simultaneously. This contradicts the company policy which disallows third parties access to the internal network. The HAVECA-model introduced in this thesis provides a framework of methods, each solving a sub problem identified in the model. The identified methods are hardening, verification, control and assurance, together supplying a method for continuously securing the internal network against a trusted third party.

The legal situation of companies costs for investing in computer software in an income tax law perspective is described by a tax law guidance that generelly acount these costs according the principles of research and development. If there is any reason to classify the costs differently, it could mean that immediate deduction not will be allowed. For this reason it is important to establish what the legal situation would be in a more nuanced tax law classification. The tax law categories that will be analysed in the thesis are research and development, inventories, intangible assets, stocks and ongoing projects. The purpose of this thesis is mainly to give examples of what such an income tax law classification can look like.While dealing with the problems of classifying the costs some situations of competition will occure.

Detta arbete behandlar hur Bluetooth fungerar samt säkerheten kring Bluetooth och några allmänt tillgängliga attack verktyg. Syftet med uppsatsen är att försöka fastställa hur säkert Bluetooth är i dagens läge. Bluetooth har länge varit tillgängligt för att utbyta data över korta avstånd. Därför har man valt att implementera det i kommunikationsenheter som mobiltelefoner och laptops med mera. Det har funnits en debatt om hur säkert Bluetooth är. För att kunna genomföra denna undersökning så har vi satt oss in i hur Bluetooth fungerar, vilka allmänt tillgängliga attacker och implementationer av dessa, som finns.