Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Abstract In this report I describe the Health Care Advice Bureau?s (sjukvårdsrådgivningen) historical background, proposals for its development according to a committee from the Blekinge County Council (Landstinget Blekinge), the Health Care Advice Bureau?s cooperation with different external operators e.g. the SOS and the Care Centers [Vårdcentraler]. I account for how I, in the same county council, aided by ethnographical methods observed or investigated the following: The nurses? interaction with the patients, the nurses? interaction among themselves, the nurses? participation in the development of the system and also the computer based system?s technical qualifications.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

This study was carried out at a company within the computer industry, a sector that is expanding and is facing scarcity of competent personnel. The purpose was to examine factors that are crucial for being an employer of choice. To get a profound picture of the employees' comprehension of their work situation, a qualitative method with semi-structured interviews with ten of the employees were conducted. To examine factors that are important for future employees a survey was created and handed out to fiftysix civil engineering students majoring in computer science. The results from the interviews showed that the organisation's culture was of great value to the employees.

The visual complexity in real-time applications, like computer games, is increasing with customer demands on vissual apperance. This trend is supported by even better graphics cards from the hardvare industry. This must be taken into consideration when the architecture of a new graphics engine is to be designed. The engines renderer is responsible of generating a picture of scene data. The renderer must cope with increasingly more complex scenes, and must be able to render them depending on available hardvare capasity.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

Companies today need to be more focused than ever on having an active Human Resource Management culture. This is not only because of the companies? concern for their staffs wellbeing, but for the companies? effectiveness in the long run. The reward systems which many corporations use today, to both keep their employees and attract new ones, is a well researched subject by scholars as well as journalists. Earlier research has suggested that it is important to implement an active Human Resource Strategy.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The aim of this study was to investigate how preschool teachers think about preschoolscience, what they consider science to be and how they deal with specific curricular objectivesrelated to science.Science is a part of our everyday life, it is a prerequisite for understanding everydayphenomena and how the world is working. Nevertheless it is often dropped in favour of othersubjects in Swedish preschools.The eight preschool teachers participating in this study are all working in the samemunicipality in the western part of Sweden with children aged 1- 5 years. The method used inthis study was interviews. The interviews were recorded to facilitate the transcriptions.The results show that preschool teachers find that science is an important subject that shouldbe introduced to the children early on in life. They also show that preschool teachers considerscience to have a preventive effect on the learning to the children, and it is needed for them tounderstand everyday processes and phenomena.

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

This thesis deals with subject-based hierarchical search-services on the World Wide Web. The purpose is to investigate how systems of this kind facilitate information retrieval through subject-based information seeking. Its starting point is taken from the study of texts and qualitative analyses of search-services on the World Wide Web. Important aspects and features of the Internet and the World Wide Web are explained as well. Three systems are examined: Mölndals Stadsbiblioteks Länkkatalog, Svesök, and Alta Vista.