The purpose of this study is to investigate in what extension students experience that computer and videogames affect them. I have chosen to focus on the physical, mental and social affect that this activity might bring them. I have also examined how much time the students spends in front of the computer or the videogame and in which social context they play.The method I have chosen to use is a quantitative opinion poll which I used in three classes of the later junior high and I have also conducted five qualitative interviews.The conclusions I have drawn from this investigation are that computer and videogames affects teenagers both physically and mentally. Physically the affects of playing videogames mostly can be derived to the physical inactivity they expose themselves to. The students themselves did not experienced any positive physical affects from their playing.Amongst the mental affects that stood out the most I recognized the social training that online gaming provided and also the intellectual stimulation that certain games offered the player.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

According to the curriculum the teachers have a responsibility to adjust the activities in the classroom in order to suit the pupils and to give them the means of assistance the pupils need to be successful in their learning. The teachers should also stimulate the interest to learn and support the pupils? self esteem. One of the problems a dyslectic pupil faces is an often weak self esteem. Another is the weak phonological awareness which makes it hard to fully understand the context and to recognize different phonemes when writing.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database.

Title: Information storage - A growing problem? Authors: Göran Svanhall Pär Truedsson Erik Ponnert Tutor: Bengt Carlsson Problem: Every day companies, regardless of size, produces new information that needs to be stored. In the information society of today, the characteristics of the information changes both in size and complexity. This results in higher demands on which storage solution that suits the company and their field of business. New and more innovating storage solutions enters the market, but are they necessary to smaller companies of development active in the IT society? Questions to Answer: Is data storage a growing problem for companies of development active in the IT society? How do traditional storage solutions manage the information growth of today? How urgent is the need of a new storage solution? Which features are prioritized in the future storage solution? Method: By performing a quantitative survey we delivered an inquiry to several companies, which answers will help us answering our above mentioned questions. Conclusion: The consulted companies experience no growing problems what so ever regarding their existing storage solution..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

The aim with this study is to explore if and how linguistic learning takes places when four pairs ofstudents in grade one writes on the computer. Observations of eight students took place duringtwelve lessons to investigate what happened during their writing processes. This study isimportant because students? computer writing is a relatively new phenomenon in the Swedishprimary school.It is clear that the peer collaboration creates a complex interaction that becomes the platform, andalso the prerequisite, for successful language training. The method can clearly give students profitsin their linguistic development.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

The purpose of this paper was to carry out and evaluate a pedagogic ICT-project, where the computer was implemented in art class. Focus was on the consequences of collaboration and also on the students? understanding of their own performance, compared to techniques in traditional art class.The study was qualitative and began with studies in literature. The contents of the literature are the foundation of the discussion, especially theories concerning the learning process, IT and computer-based learning. In the project, three different groups of students from upper secondary school attended and they where given tasks to solve in the image editing program Paint Shop Pro.

Miljöbron is a non-profit organization; their main purpose is to merge companies and students into different environmental projects. The projects can be an assignment, practical vocational training or degree thesis. Miljöbron is expanding and the demand from students and companies is rapidly growing. Because of the expansion, a large amount of information needs to be stored and managed in a structured database. Also the need of a interface that is structured and easy to use when managing information and Miljöbron?s statistics, for Miljöbron?s staff.

Att utveckla en utrustning för mekaniserad slipning..

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

Information about the risks involved shall be distributed to the people living in the area nearby to potentially dangerous installation. Swedish law stipulates strict requirements on what information should be supplied, but the law itself does not give any guidance on presentation. The main purpose of the study is to give recommendations on how to improve the information brochures. Within the study, eight people working with risk information have been interviewed and seven different risk information brochures have been studied. Also, a theoretical analysis and a practical experiment were performed using brochures from two municipalities.

The purpose of this paper was to carry out and evaluate a pedagogic ICT-project, where the computer was implemented in art class. Focus was on the consequences of collaboration and also on the students? understanding of their own performance, compared to techniques in traditional art class.The study was qualitative and began with studies in literature. The contents of the literature are the foundation of the discussion, especially theories concerning the learning process, IT and computer-based learning. In the project, three different groups of students from upper secondary school attended and they where given tasks to solve in the image editing program Paint Shop Pro.

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.