This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

The main objective of this thesis is to examine the situation concerning information technology, computers and information resources for university students at a selection of universities, and their libraries, in Sweden. Another objective is to compare this situation to what is stated in policy documents on the subject, and if the size of the university matters regarding resources. The thesis starts with a discussion of several authors, Frank Webster, Paul F. Burton and Lars Qvortrup among others, and their views on the information society. These range from whether we are living in it, are in a transition period or are still in the Industrial Society.

Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

JavaScripts popularity is increasing and the number of libraries too. This report focuses on well-known software metrics in complexity, maintainability and different size-metrics. A few different JavaScript libraries are compared and analyzed. The result shows that there are indeed differences, mostly in size- and complexity-measures where some functions are implemented with a higher complexity..

Problemområde: Idag är användandet av peer-to-peer (P2P) - applikationer såsom KaZaa, ICQ och Seti@home utbrett bland privatpersoner. Användningen inom företag är dock ännu i sin linda. Vi kommer därför i den här uppsatsen utreda om ett eventuellt införande av P2P- teknik i ett företagsnätverk ger några fördelar jämfört med en klassisk Client/Server-lösning. Hypotes: Arbetet bygger på hypotesen: ?En P2P-lösning ger fördelar för företaget jämfört med en Client/Server-lösning? Genomförande: För jämförelsen mellan P2P och Client/Server definierades och jämfördes fem områden: Säkerhet, Användbarhet, Tillgänglighet, Bandbredd samt Utrustningskrav. Slutsats: Inom områdena Användbarhet och Tillgänglighet ger en P2P-lösning klara fördelar, däremot inom områdena Säkerhet och Bandbredd visar Client/Server- lösningen istället klara fördelar. Området Utrustningskrav är oavgjort då det inte finns någon märkbar skillnad på lösningarna. Säkerhetsproblemen är P2P-teknologins akilleshäl och det problem som är mest troligt att stoppa stora investeringar i framtiden om det inte löses. Slutsatsen av vår jämförelse blir sålunda: För ett företag som redan har ett existerande Client/Server-nätverk är det inte någon idé att helt byta system, däremot kan det vara av intresse att introducera en applikation som möjliggör skapandet av så kallade Virtuella Nätverk. För ett helt nytt företag kan skapandet av ett P2P-nätverk vara ett väl så intressant alternativ till Client/Server.

Information handling has been a key issue for different companies for a long time. Electronic Data Interchange (EDI) is used to transfer different business documents from one company to another. This is done in such way that the information itself is separated from how this information is stored and handled in the companies internal systems. As different companies have different systems there is a need for a standardised format for this exchange. There is a big difference between EDI-systems based on what kind of EDI-standard is used. The most common standard in Europe is EDIFACT, but with increased interest of using the Internet for business communication there is a need for a standard that is adjusted for use over the Internet.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

In Sweden there is a long ongoing discussion about computer and cellphone usage during lectures in school. The discussion has mainly covered elementary school up to college students, but this topic is at least as relevant for university students. Today cellphones are so advanced; you can do everything with one that you previously only could do with a computer, the difference is that everyone is carrying one with them all the time. This study shows how concentration during lectures is affected by the cellphone accessibility and usage. With this study we want to find out how university students perceive cellphone usage affects their own concentration during lectures.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

Failed system development projects are a common sight within the IT-industry. During the last ten years we have seen several more or less disastrous high profile projects being reported in the news. One aspect that might hold some of the responsibility for these failures is the fact that more organisations are knowledge intensive which makes their work processes difficult to capture in computer systems. How requirements engineering is handled becomes even more important in these cases, where processes are unpredictable and rely on individual judgement and knowledge. In this study we have examined the challenges of developing systems for knowledge intensive businesses through a method of qualitative case study of a university laboratory.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

In this bachelor thesis a complete prototype of an industrial vibration measurement platform has been developed. By measuring a number of variables such as acceleration, temperature and speed conclusions can be drawn on machinery health. The aim is to evaluate hardware and software solutions for a possible future product. Based on a requirement specification a proper hardware design has be developed. The hardware consists of a four-layer PCB with an ARM Cortex-M3 microcontroller and about 250 other components. The PCB was designed, assembled, tested and finally housed in a box.

The purpose of this media scientific study is to contribute to a better understanding about how blind people?s empowerment and participation may affect their role in the digital society.Earlier international studies in this area have shown that blind people not only need more knowledge then the seeing population about the computer, but also about the technology behind their tools for using Internet. The results from these studies have also shown that Internet increases the blind people?s independents and that those who use Internet feel more involved in the society.A qualitative method was chosen to study the three most common categories from the earlier studies: knowledge of technology, empowerment and participation. Are there differences in the results compared to our study in Sweden 2014?Interviews with eight blind, experienced computer users have shown that knowledge of technology is essential for their use of Internet and that the Internet increases their empowerment and their participation.