The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

The thesis aims to understand how learning processes are affected when an organization split into two separate organizations. The study is designed as a single case, covering a new government agency?s takeover of a core activity from another agency and the use of a purchase-provider split between the agencies, providing the new agency with IT-services. The findings revealed a difference in productive system and knowledge types between core- and IT-activities. The core activity was found to be dominated by explicit knowledge while the IT-activity seemed to be dominated by a mix of explicit and tacit knowledge.

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

Sekretessbelagd.

Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.

This master thesis was performed at Scania Research & Development. The given mission was to see where the department Systems Development should focus to improve their development work. Thus the purpose was to map the product development processes in which the department works today and within them identify improvements. To fulfil the purpose a theoretical study of relevant terms, such as improvement work, product development and processes, initially was formed. The mapping method used is called "walk trough" and meant to let the people working in the processes be guides in their own process.

The aim of this thesis is to analyse and if possible improve the communication, mainly seen from a pedagogical perspective, between the IT company (Nostratic) and their clients in a first meeting. The analysis covers the preparation part, communication during the meetings, the technical terminology used during the meetings as well as the follow up of the meetings. Due to the lack of research within this area and the lack of personal experience on my part, the conducted study has been explorative with the use of qualitative methods. Although my first aim was to put emphisis on the pedagogical part of the communication, I found while conducting the study that there were other areas of higher importance to analyse in order to improve the customer meetings. Unfortunately the company went bankrupt in the middle of my study which resulted in me not beeing able to try out the potential improvements.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

The work describes the development of an adjustment algorithm that will replace today?s manual adjustment of Lead- and Lag-filters at ABB Robotics industrial robots. The adjustment is mainly for the filter parameters in the control system.Three different algorithms have been created to replace the manual adjustment. One of them is based on the criterion from the manual adjustment and another one on optimization of the sensitivity function. The last one is a combination of the two.The report describe the development of the algorithms and how they behave during simulations and tests on real robots.

This research is about six pedagogue´s and their reflections about the size of the children´s group in the preschools. Then I will discuss the pedagogue?s recommendation on the significance of the size of a children´s group learning and development and it´s practical significance for the preschool function. The pedagogue?s statements will be discussed in relation to The Swedish National Agency for Education (TSNAE) guidelines on group size.The theoretical framework of this essay will take an overview of the social cultural perspective, the group size and its significance for both the children´s learning and development, for interaction and communication and TSNAE advice and guidelines.

GIS on the Internet is a rather new phenomenon, which has evolved from the need ofdistributed geographical data. It is also a powerful tool for presenting information on theInternet. This master thesis aim to create a web based GIS application with information onlime spreading and the situation concerning acidification in the county of Kronoberg, Sweden.The web based GIS application will be used by the county administrations in Kronoberg toinform the public and the municipal authorities of current counteracting acidification activity.This report includes documentation on acidifying processes and liming activities, which arepublicised together with the web based GIS application. The web based GIS application wascreated with ArcIMS, a new program in the ESRI family of GIS programs. The programincludes a guided structure, to development of everything from a map to a complete GISapplication, including mapservice and websites.

This study aims to analyse the connection between poverty reduction and sustainable development through strategies used for the reduction of poverty. With the methodology of content analysis of three policy documents to provide and easy overview of how the government of Ethiopia is planning to achieve sustainable and long-term poverty alleviation. The focus of this study will be on Ethiopia, a country with very high economic growth in the past years but still with hight poverty rates. The purpose of this study is to contribute to the already existing and broad knowledge and research of sustainable development and poverty alleviation and contribute with more research in Ethiopia where the research done in this specific area and region is not in abundance. In this study all dimensions of sustainable development, social, economic and ecological are included to get a more holistic picture of the sustainable development in the government?s plans and its challenges.

Nature is in many ways considered a source to both physical and mental health among people. Trends in today?s society reveal that children become more distanced to nature. Seen from the perspective of sustainable development this trend is considered crucial: it is of importance that children in their early ages experience nature positively in order to develop a dedication towards environmental issues as adults.The purpose of this study is to investigate how teachers use outdoor learning as an educational tool. Research data were collected through a series of interviews.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.